Top Cover - HP Compaq 6730s Maintenance And Service Manual

Top cover

Description
Top cover (includes TouchPad board and cable, and TouchPad button board and cable)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Switch cover and keyboard (see
d. Speakers (see
e. Display assembly (see
Remove the top cover:
1. Turn the computer upside down, with the front toward you.
2. Remove the two rubber screw covers (1) and the seven slotted Torx ST8M2.5×7.0 screws (2) that
secure the top cover to the computer. The rubber screw covers are available in the Rubber Kit,
spare part numbers 491257-001 (for use only with HP Compaq 6730s Notebook PC models) and
491620-001 (for use only with HP Compaq 6735s Notebook PC models).
74 Chapter 4 Removal and replacement procedures
Battery on page 50).
Hard drive on page 51)
Optical drive on page
Switch cover and keyboard on page
Speakers on page 66)
Display assembly on page
59)
67)
Spare part number
491254-001
61)