HP Compaq 6730s Maintenance And Service Manual page 78

5. Remove the display bezel (3). The display bezel is available using spare part numbers 491257-001
(for use only with HP Compaq 6730s Notebook PC models without a webcam), 491258-001 (for
use only with HP Compaq 6730s Notebook PC models with a webcam), 494109-001 (for use only
with HP Compaq 6735s Notebook PC models with a webcam), and 494108-001 (for use only with
HP Compaq 6735s Notebook PC models without a webcam).
6. If it is necessary to replace the webcam module from the display enclosure, gently pull the webcam
module away from the double-sided tape on the display enclosure (1) and disconnect the webcam
cable from the module (2). The webcam module can be ordered by using spare part numbers
491251-001 (for use only with HP Compaq 6730s Notebook PC models) and 494110-001 (for use
only with HP Compaq 6735s Notebook PC models).
NOTE:
module with the pins on the display enclosure and press onto the double-sided tape.
7. If it is necessary to replace the display inverter, remove the inverter (1) from the display enclosure
as far as the display panel cable and the backlight cable will allow.
70 Chapter 4 Removal and replacement procedures
To replace the webcam module in the display enclosure, align the holes on the webcam