Usb/Digital Media Board - HP Compaq 6530b Maintenance And Service Manual

2. Remove the speaker (2) from the base enclosure.
Reverse this procedure to install the speaker.

USB/digital media board

Description
USB/digital media board (includes cable)
Before removing the USB/digital media board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
5. Remove the following:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Switch cover (see
e. Display assembly (see
f. Top cover (see
92 Chapter 4 Removal and replacement procedures
Battery on page 46).
Hard drive on page 52)
Optical drive on page
Keyboard on page 61)
Switch cover on page
Display assembly on page
Top cover on page 81)
55)
65)
74)
Spare part number
486249-001