HP 3D DriveGuard software
The HP 3D DriveGuard software enables you to perform the following tasks:
●
Enable and disable HP 3D DriveGuard.
NOTE:
3D DriveGuard. Additionally, members of an Administrator group can change the privileges
for non-Administrator users.
●
Determine whether a drive in the system is supported.
To open the software and change settings, follow these steps:
1.
In Mobility Center, click the hard drive icon to open the HP 3D DriveGuard window.
– or –
Select Start > Control Panel > HP 3D DriveGuard.
2.
Click the appropriate button to change settings.
3.
Click OK.
6
Chapter 4 HP 3D DriveGuard (select models only)
Depending on your user privileges, you may not be able to enable or disable HP
ENWW