Table of Contents
Advertisement
Tip: If you want to change the WiFi settings of the router's main network, use a wired
connection to avoid being disconnected when the new WiFi settings take effect.
To configure WPA and WPA2 enterprise security:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The Dashboard displays.
4. Depending on the WiFi network that you are configuring, do one of the following:
• If you are configuring the main WiFi network, select Settings > Setup > Wireless
Setup.
The Wireless Settings page displays.
• If you are configuring the guest WiFi network, select Settings > Setup > Guest
Network.
The Guest Network page displays.
5. In the Security Options section for either the 2.4 GHz band or 5 GHz band, select
the WPA/WPA2 Enterprise radio button.
The page adjusts.
6. In the WPA/WPA2 Enterprise section, specify the following settings:
• From the WPA Mode menu, select the enterprise WPA mode:
-
WPA2 [AES]. WPA2 provides a secure connection but some older mobile
devices do not detect WPA2 and support only WPA. If your network includes
such older devices, select WPA [TKIP] + WPA2 [AES] security.
-
WPA [TKIP] +WPA2 [AES]. This type of security enables mobile devices that
support either WPA or WPA2 to join the router's WiFi network. This is the
default mode.
• RADIUS server IP Address. Enter the IPv4 address of the RADIUS server to which
the WiFi network can connect.
• RADIUS server Port. Enter the number of the port on the router that is used to
access the RADIUS server for authentication. The default port number is 1812.
Manage the Router's WiFi
Settings
XR500 Nighthawk Pro Gaming Router
107
User Manual
Advertisement
Table of Contents
