HP 4410t Administrator's Reference Manual page 87

Mobile thin client

Hide thumbs Also See for 4410t:

Table of Contents

Grasp the edge of the memory module (2), and gently pull the module out of the memory

module slot.

To protect a memory module after removal, place it in an electrostatic-safe container.

Insert a new memory module:

CAUTION:

To prevent damage to the memory module, hold the memory module by the edges

only. Do not touch the components on the memory module.

Align the notched edge (1) of the memory module with the tab in the memory module slot.

With the memory module at a 45-degree angle from the surface of the memory module

compartment, press the module (2) into the memory module slot until it is seated.

CAUTION:

To prevent damage to the memory module, do not bend the memory module.

Inserting and replacing memory modules

Table of Contents