Table of Contents
Advertisement
4 Press
or
to move the picture up and down as
needed, then press ENTER. To save the new
settings, press
press ENTER.
OR
To revert to the factory defaults, highlight Reset
then press ENTER.
5 Press EXIT to close the menu.
Automatically adjusting the aspect ratio
When the Auto Aspect option is set to On, your TV
automatically selects the picture size when one of the
following input sources is received:
• 480i, 480p, 720p, 1080i digital signal from the
ANT/CABLE IN jack
• 480i, 480p, 720p, 1080i, 1080p, or VGA (60Hz) signal
from an HDMI jack
Aspect Ratio of Signal
Source
4:3 Normal
4:3 Letter Box
16:9
Not defined (no ID-1
data or HDMI® aspect
data)
1 Press MENU, press
then press ENTER.
or
to highlight Done, then
Auto Aspect is set to
On)
4:3
TheaterWide 2
Full
The current picture size
you selected, see
Adjusting the picture
size
on page 51.
or
to highlight Picture,
www.tv.toshiba.com
32" 720p / 49" 1080p / 55" 1080p 60Hz LED TV
2 Highlight Display Settings, then press ENTER.
3 Highlight Auto Aspect, then press ENTER.
4 Highlight On, then press ENTER. (To turn off
Aspect Ratio, select Off.)
5 Press EXIT to close the menu.
Using the 4:3 Stretch
When 4:3 Stretch is turned on, your TV displays 4:3
programs as a full-screen picture.
1 Press MENU, press
then press ENTER.
2 Highlight Display Settings, then press ENTER.
or
to highlight Picture,
53
Advertisement
Table of Contents
