Toshiba 49L510U18 Manual page 50

32L310U18 / 49L510U18 / 55L510U18 32" 720p / 49" 1080p / 55" 1080p 60Hz LED TV
• Store—The Store picture mode is only
available if you selected Store Mode during
initial setup. This option is hidden in the
Home mode.
Note
When your TV is set to Store Mode
(during the initial setup or from the
Installation menu), your TV will always
revert to Store Mode when you turn it on.
• Reset—Resets all picture settings to the factory
default.
• Backlight—Sets the overall brilliance of the
screen.
• Contrast—Adjusts the brightness of the light
areas of the picture.
• Brightness—Adjusts the brightness of the dark
areas of the picture.
• Color—Adjusts the color intensity of the picture.
A low setting may make the color look faded. A
high setting may make the color look artificial.
• Tint—Adjusts the color balance of the picture.
Use this control to make skin tones look more
natural.
• Sharpness—Adjusts the color detail of images.
If you set this control too high, dark images may
appear with light or white edges.
• Advanced Picture Settings—Opens the
Advanced Picture Settings menu where you can
adjust additional video options.
• White Balance—Adjusts the color
temperature.
A Highlight Color Temperature, then press
ENTER.

B Press
the blues), Medium (to select a neutral
color temperature), or Warm (to enhance
the reds), then press ENTER.
C Highlight Red Intensity, Green
Intensity, or Blue Intensity, then press
ENTER. Press
D Press 
ENTER.
50

or to select Cool (to enhance
 
or to adjust the setting.
to highlight Done, then press
www.tv.toshiba.com
• Gamma Mid Luminance—Lets you adjust
the levels of black in the picture.
A Highlight this option, then press ENTER.
 
B Press or to decrease or increase the
black level detail.
• Dynamic Backlight—Automatically
strengthens the black coloring of dark areas
in the video according to the level of
darkness. You can select High, Low, or Off.
• Dynamic Contrast—Automatically detects
changes in picture quality that affect the
appearance of your contrast settings and
automatically adjusts the video. You can
select High, Middle, Low, or Off.
• MPEG Noise Reduction—Reduces artifact
noise and mosquito noise by MPEG
encoding. You can select Off or On.
• Dynamic Noise Reduction—Reduces
picture noise (snow). You can select Off, Low,
or High.
• Edge Enhancer—Adjusts the picture to
achieve a sharper image. You can select On
or Off.
• Reset—Resets all advanced picture settings
to factory defaults.
• Display Settings—Opens the Display Settings
menu where you can adjust how the picture is
displayed on the screen.
You can adjust:
• Picture Size—See Adjusting the picture size
on page 51.
• Auto Aspect—See Automatically adjusting
the aspect ratio on page 53.
• 4:3 Stretch—See Using the 4:3 Stretch
page 53.
• Picture Position—See
TheaterWide™ picture
Note
The Picture Position option may be
grayed and unavailable for some Picture
Size settings.
on
Scrolling the
on page 52.