Icmp Ping; System Log - TP-Link EC120-F5 User Manual

Chapter 11
3. Clear the Enable

11. 6. 5. ICMP Ping

ICMP (Internet Control Message Protocol) Ping is used to diagnose the network by
sending ICMP echo request packets to the target remote or local host and waiting for
an ICMP response.
You can control the router's replies to ICMP Ping requests.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced
3. Specify the ICMP Ping reply options.
• Remote: Select it if you want the computers on a public network to ping the
router's WAN IP address.
• Local: Enabled by default, if enabled, the computers on a private network can
ping the router's LAN IP address.
4. Click Save to make the settings effective.

11. 7. System Log

System Log can help you know what happened to your router, facilitating you to locate
the malfunctions. For example when your router does not work properly, you may need
to save the system log and send it to the technical support for troubleshooting.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced
check box and click
> System Tools > Administration, and locate the
> System Tools > System Log
Save if you want to disable this function.
page.
Manage Your Router
ICMP Ping section.
79