Remote Management - TP-Link EC120-F5 User Manual

Chapter 11
3. Enable Local Management over HTTPS
HTTPS as the default settings. Enter the
device to manage the router.
4. Click Save.
Now, you can manage the router over both HTTP (http://tplinkwifi.net) and HTTPS
(https://tplinkwifi.net).
Note:
If you want all local devices can manage the router, just leave the

11. 6. 3. Remote Management

By default, the remote devices are not allowed to manage the router from the internet.
You can enable remote management over HTTP and/or HTTPS if needed. HTTPS is a
more secure way to access the router.
Note:
If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x), you cannot use the remote management
feature because private addresses are not routed on the internet.
Follow the steps below to allow remote devices to manage the router over HTTPS.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to Advanced
Management section.
> System Tools > Administration, and locate the
and keep the Port for HTTP
IP address or MAC address
IP/MAC Address field blank.
Manage Your Router
and Port for
of the local
Remote
77