2. Setting up your TV ... 21 2.1 Basic Connections ... 21 2.1.1 Power Connection ... 21 2.1.2 Connecting an Antenna or Cable TV ... 21 2.2 Connecting External Devices ... 22 2.2.1 Connecting External Earphones ... 22 2.2.2 Connecting to AV Devices ... 23 2.2.3 Connecting a VCR/ Set-top box/ DVD Player Using...
Page 3
6.2 Other Descriptions ... 43 6.2.1 Double Clicking ... 43 6.2.2 Buttons Information ... 43 6.2.3 Power-out Protection Capability ... 43 6.3 Component Program Codes ... 44 7. Setting the TV on the Wall ... 51 8. Using the Cable Organizer ... 52...
Regulatory Information FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This symbol is used to alert users to pay attention to important descriptions regarding usage, maintenance (repair), and additional important information related to this TV. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION This symbol is used to alert users...
Safety Notices Installation Safety Notes Location Avoid allowing the TV to get prolonged exposure to sunlight or other strong sources of heat. Leave sufficient distance between the TV and the wall to provide enough space for the emission of heat.
Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Page 8
Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Page 9
5. If any fluid is sprayed or dropped into the TV, contact an authorized service technician. 6. The screen of the TV is made of glass. Avoid hitting or scraping it. If the screen is broken, do not touch the broken glass.
The information in this manual is subject to change without notice. To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”) shall not be liable for direct, indirect, special, exemplary, incidental or consequential damages arising from any defect or omission in this manual, even if advised of the possibility of such damages in advance.
Hannspree. The TV described in this manual may include copyrighted software of Hannspree (or other third parties). Hannspree (or other third parties) preserves the exclusive rights for copyrighted software, such as the right to distribute or reproduce the copyrighted software.
Trademark Notice Hannspree products incorporate High-Definition Multimedia Interface (HDMI™) technology. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. License Notice and Trademark Acknowledgment Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby...
Getting Started Package Contents Make sure the following components are included in the box. Please contact Hannspree Customer Service immediately if anything is missing or damaged. • • Power cord • Remote control and batteries • User’s manual • Quick start guide •...
VCR, set-top box, or DVD player to the standard CVBS, S-Video, component, and HDMI input ports (location of these ports depends on model). You can also use the TV as a monitor for your PC by connecting it through the VGA or DVI port.
Power/ Standby indicator Speakers Function Power button. Press to turn the TV on or off. Press to open the input source list or mark an item on the OSD menu. Press to open the OSD menu. Press to increase the channel number or move upward to the previous item on the OSD menu.
(audio) x 2 Function Connect to the included power cord. AC IN Connect to an antenna or cable TV. Connect to an external device, such HDMI IN as a DVD player, set-top box, or a PC’s DVI/ HDMI port.
Page 17
Description Connector S-Video 1 input Composite input (video) Composite input (audio) S-Video 2 input Composite input (video) Composite input (audio) Earphone output Function Support JPEG and MP3 files. Connect to an external device, such as a VCR, set-top box, or a DVD S-VIDEO 1 player.
RETURN Select channel Volume adjust Function Press to turn the TV on or off. Press to open the input source list. Use to select a channel directly. Press 0-9 to enter the program numbers (press 1 and 0 for channel 10).
Page 19
Press to select a programmed Audio Receiver/ Amp/ Home Theatre System. Press to select a programmed Cable TV set-top box or a satellite TV set-top box. Press to enter TV mode. Press to switch to favorite channels. (if no favorite channel was set, "Not Available!"...
Inserting the Remote Control Batteries 1 Open the battery compartment cover at the back of the remote control (A). 2 Insert the batteries paying attention to the polarity markings inside the battery compartment (B). 3 Close the battery compartment cover (C).
Page 21
• For best results, use the remote control within a proper distance from the front of the TV. Do not exceed an angle of 30 degrees when pointing at TV. • The operational distance may be shortened when the signal sensor is directly exposed to strong light.
Basic Connections 2.1.1 Power Connection 1 Connect the power cord to the AC IN input jack on the rear of the TV. 2 Insert the plug at the other end of the power cord into a power outlet. 2.1.2 Connecting an Antenna or Cable TV Connect one end of the VHF/UHF (Antenna) or CATV cable to VHF/UHF jack on the rear of the TV.
Connecting External Devices Connect external devices such as VCRs, set-top box, DVD players, video game consoles, earphones, or a PC to the TV using the appropriate ports on the rear of the 2.2.1 Connecting External Earphones Note: • External speakers or headphones are not included with the TV.
2.2.2 Connecting to AV Devices HDMI IN HDMI 4 HDMI Cable (Optional) HDMI Game Console AUDIO VIDEO Audio Cable Video Cable (Optional) (Optional) L VIDEO R-AUDIO-L VIDEO Audio/ Video Cable (Optional) S-VIDEO...
2.2.3 Connecting a VCR/ Set-top box/ DVD Player Using Video Inputs Connect the TV to a VCR/set-top box/ DVD player using the video inputs. S-VIDEO 1 AUDIO Video Cable (Optional) Audio Cable (Optional) Video Cable (Optional) Audio Cable (Optional) Video Cable...
1 Connect the HDMI 1 or HDMI 2 port of the TV to the DVI output of the PC. 2 Connect the PC LINE IN port of your TV to the line out port of the PC of your TV to listen to audio from the PC.
However, it is necessary to do so if a HDMI to DVI cable is connected. 2.2.7 Connecting USB Connect the USB flash drive to the TV using the USB port as shown. The JPEG and MP3 files are supported. Note: •...
TV source for channel search. Press OK to confirm. 2.3.3 Performing an Automatic Channel Search Before using the TV to view programs, you need to activate the channel search first. 1 Press MENU on the control panel or remote control, then select to enter the Channel menu.
2.3.5 Adjusting the Volume 1 Press VOL+ on the control panel or volume. 2 Press VOL- on the control panel or the volume. MUTE 3 Press to eliminate sounds, and press buttons to restore the original volume. 2.3.6 Editing Channel Table or Favorite Channel 1 Press MENU on the control panel or remote control, then select to enter the Channel menu.
Settings The On-Screen Display (OSD) menu system provides a quick and simple method to adjust the TV settings. The OSD menu can be accessed through the buttons either on the control panel or the remote control. Before going to details of each OSD item, you may get acquainted with the...
OSD Setting Menus Follow the instructions indicated on the bottom of the OSD Function Menu. Press on the control panel or through the menus. Press INPUT on the control panel or OK key on the remote control to select an item and then press MENU key to exit the OSD menu. The following menus can be set by different adjustment methods.
Adjusting Audio Settings Press MENU to enter the OSD Main Menu screen. Press on the remote control or / CH on the control panel to select Audio menu. Press / OK on the remote control or INPUT on the control panel to enter the Audio menu.
•The Antenna can be set to •The Scan Mode can be set to •The Auto Scan can be set to only). Note: The Channel settings are available when the signal is set to TV source. Picture Audio Channel V-CHIP Setup...
Press OK on the remote control or INPUT on the control panel to mark an item. Press RETURN to return to the V-CHIP menu. Press MENU to exit the V-CHIP menu. The V-CHIP menu can set Change Password, Lock, Unrated Block, MPAA, TV Rating, Can. English, and Can. French settings. Note: Super Password Step 1: Input password "7071"...
Clock Mode is set to Manual; Clock Mode can be set to • Setup Wizard can be used to set up OSD Language, Clock Mode, Time Zone, TV RF Source, and Channel Scan. • The five available OSD languages are: English, Spanish, French, Traditional Chinese, and Simplified Chinese.
Press on the control panel or remote control. • Press INPUT to cycle through connected video sources. • Press channel up or channel down to switch to other TV channels. • Make sure all cables are connected properly. • Check the antenna and cable connections.
Specifications LCD Panel Size Screen Format Panel Resolution TV System Video System Photo System Audio System Built-in Stereo Amplifier Output Power Consumption Power Supply Dimension W x H x D Weight 42 inch TFT 16:9 1920 (H) x 1080 (V)
TV button for TV; the corresponding indicator light then comes on for 2 seconds then it goes off after, and now the current electronic equipment mode has been switched to TV.
6. During the setting process, only digit keys ‘0’ through ‘9’ are valid inputs, while other buttons are deemed invalid and do not affect the code setting. For example, inputting “02” then pressing RETURN does affect the “02” already input. 6.1.3 Searching Codes If the desired electronic equipment code for setting can not be found on the list in the...
3. While holding the electronic equipment button, press VOL- twice consecutively to cancel volume lock under current mode (for example, if volume lock was set under TV mode and you wish to transmit code values under current DVD mode, just perform this unlock operation, while those electronic equipment modes not operated still have volume locked up).
3. During the setting process, releasing the electronic equipment button exits the setting mode immediately without changing the status prior to setting. 4. Pressing any of the electronic equipment buttons to enter factory setting operation mode. 5. The default current electronic equipment is TV upon first power-on. Electronic equipment CABLE...
Page 43
Note: Each re-powering restores factory setting, and all electronic equipment modes transmit TV-mode infrared (IR) signal until being set up through code setting. For example, setting the electronic equipment code of CABLE as ‘0001’ stops transmitting TV code, whereas AUDIO and DVD continue to transmit TV code.
6.1.7 Description There is no multi-function code setting operation under TV mode but a fixed code for the TV manufacturer. Therefore, code setting and code-searching functions are disabled under this mode; other functions such as volume lock, channel lock and code display are operable.
*Installing the LCD TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. Please contact with Hannspree dealers in wall mount bracket. You can ask a qualified service personnel about using an optional bracket to mount the TV to the wall.