Table of Contents
Advertisement
2.3
Using the TV
2.3.1
Turning the TV On and Off
1 Press
on the control panel or remote control. The power LED indicator on
the TV changes from red to green, indicating that the TV is on.
2 Press
again. The power LED changes from green to red, indicating that
the TV is off.
2.3.2
Switching Source Signals
Press INPUT on the control panel or remote control to select the incoming source
signal to set TV source for channel search. Press OK to confirm.
2.3.3
Performing an Automatic Channel Search
Before using the TV to view programs, you need to activate the channel search first.
1 Press MENU on the control panel or remote control, then select to enter the
Channel menu.
2 Select Antenna to set the signal source. (Air or Cable, default is Air)
3 Select Auto scan, then Start option.
4 Press OK on the remote control to run the channel search.
2.3.4
Selecting Channels
•
Press CH
on the control panel or
channel number.
•
Press CH
on the control panel or
channel number.
•
Enter the specific channel number by pressing the number buttons on the
remote control.
on the remote control to increase the
CH
CH
on the remote control to decrease the
27
Hide quick links:
Advertisement
Table of Contents
