Table of Contents
Advertisement
Flange
1.
Drill a 22 mm (7/8 in.) diameter hole in the desired location.
2.
Trace and drill three starter holes for the supplied screws using the flange as a template.
3.
Insert the preamplifier through the mounting flange.
4.
Slip the mounting flange retaining ring over the bottom of the preamplifier and slide it up until it is flush to the bottom of
the flange. Then press the ring firmly into place.
5.
Secure the flange to the mounting surface with three screws.
Shock Mount
1.
Drill a 44mm(1-3/4 in.) diameter hole in desired mounting surface.
2.
Mark and drill starter holes for screws, using shock mount as a template.
3.
Secure shock mount to mounting surface with screws.
4.
Thread the supplied adapter onto the MX400 microphone before inserting it into the shock mount.
Shure Incorporated
6/11
Advertisement
Table of Contents
