Messages - Technics SL-G700E-K Operating Instructions Manual

Network / super audio cd player
Table of Contents

Advertisement

Messages

AUTO OFF
The unit has been left unused for about 20 minutes
and will shut down within a minute. (⇒ 82) Press
any button to cancel it.
Checking Device
The unit is checking the connected USB device.
• After this display has disappeared, start operating.
Download Fail
The firmware download has failed.
The network is not connected to the internet.
• Press any button to exit. Please try again later.
• The server cannot be found. Press any button to
exit. Make sure that the network is connected to
the internet.
Empty
The selected folder is empty.
• Move tracks into the folder and retry the
operation.
The server is not found on the network.
• Check to see if the server is connected to the same
network as this unit, and retry the connection to
this unit. (⇒ 28)
No station, track, etc. is registered to the favourite
list or playlist.
• Add a station or track to the list. (⇒ 47, 86)
Error
Incorrect operation is performed.
• Read the instructions and try again.
Fail
Network connection is not complete.
• Try the setting again. (⇒ 28)
Firmware update is available
The firmware (free of charge) for this unit is
available.
Press [NWP].
Press [OK].
Press [ ], [ ] to select "Yes" and then press
[OK].
• The progress is displayed as "Updating
while updating. (" " stands for a number.)
• Do not disconnect the AC mains lead or turn
this unit to standby while updating. (⇒ 83)
• When the update has finished successfully,
"Success" is displayed.
Press [
on.
• For the update information, refer to the following
website.
www.technics.com/support/firmware/
] on the unit to turn this unit off and
101
%"
(Continued)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl-g700Sl-g700e

Table of Contents