Installation Introduction - Stanley NUA Electric User's Manual & Installation Instructions

Table of Contents

Advertisement

14. Installation introduction

Consumer protection
As a responsible manufacturer, we take care to make sure
that our products are designed and constructed to meet the
required safety standards when properly installed and used.
WARNING - ELECTRIC SHOCK HAZARD
n
It is the customers responsibility to contact a qualified
electrical installer to make sure the electrical installation is
adequate and in conformance with the regulations.
Take special care when cutting holes in walls or floor.
Electrical wires may be behind the wall or floor covering and
could cause an electrical shock if you touch them.
Locate any electrical circuits that could be affected by the
installation of this product and disconnect power circuit.
WARNING: THIS APPLIANCE MUST BE EARTHED.
n
DO NOT use an extension lead with this appliance.
The appliance is designed for the voltage stated on the data
plate.
Recommended but not mandatory to fit an individual
Residual Current Device (RCD) to the cooker supply circuit.
Hand this Manual to the User for retention and instruct in the
safe operation of the appliance.
26

Advertisement

Table of Contents
loading

Table of Contents