Royal DORA AIR Installation And Maintenance Manual page 86

I t is possible to set what should be shown on the display when the latter is in standby mode
a) Use the arrow keys
b) Select the password "
c) Scroll with the key and select the sub-menu
d) Set with the keys
"OFF"
•
"1"
•
"2"
•
"3" •
"4"
•
. Press the key to confirm the set data.
12.3.4 Volume setting
S et the volume level of the buzzer, according to your requirements:
a) Use the arrow keys
b) Select the password "7" with the
c) scroll with the key and select the submenu
d) Use the and keys to set the desired volume level (
12.3.5 Fuel optimisation
Excellent fuel depends on different factors (type of installation, operating and maintenance
conditions, type of pellets, etc.)
Generally speaking, if at the end of combustion, there is a lot of residue in the burn pot, you
should change the combustion configuration (by increasing the value) until you find the
best solution.
a) Use the arrow keys to go to the set-up menu
b) Select the password "7" with the
c) Scroll with the key and select the submenu
d) Set with the keys
"
1"
"2"
"3"
. Press the key to confirm the set data.
86
to go to the set-up menu
7
" with the key and confirm with the
and one of the following values:
The display will remain fixed on the last display operated by the user;
All the operating parameters will be displayed cyclically;
The temperature is displayed (detected by the room probe)
The current time is displayed
The autonomy is displayed in hours before having to refill the tank, if the
refuelling function has been enabled.
to go to the set-up menu
key and confirm with the
key and confirm with the
and one of the following values:
and press the
key;
[12]
and confirm with the
and press the
key;
[13]
and confirm with the
OFF,1 ... 5
) and confirm with the
and press the
key;
[14]
and confirm with the
key;
key;
key;
key;
key.
key;
key;
004778391 - 23/09/2021