Huawei MatePad T 10 User Manual page 63

Table of Contents

Advertisement

2
Go to
Settings > Biometrics & password > Smart Unlock, and enable Smart Unlock.
3
Touch
to pair with a Bluetooth device, such as a smart band. After the pairing is
successful, the Bluetooth device name will be displayed in the Paired devices list on the
Smart Unlock settings screen.
4
Touch the Bluetooth device name in the Paired devices list, touch Ok, and follow the
onscreen instructions to set this device as the Unlocking device.
Afterwards, your device will automatically unlock when the Bluetooth device is in close
proximity to it.
To learn more about Smart Unlock, touch
Pin a Screen
You can pin the screen of an app so you can stay focused on it. Try this feature when playing
games, watching videos, and more.
Go to
Settings > Security > More settings > Screen pinning, and enable Screen
pinning.
When using gesture navigation, swipe up from the bottom of the screen and hold to access
the recent tasks screen, then touch
the bottom of the screen.
When using three-key navigation, touch
on an app preview. To unpin, touch and hold
Safe Mode
Safe mode uses a simplified operating system with only basic functions and pre-installed
apps available. It can be used to locate third-party apps causing system failures.
Safe Mode Functions
After installing certain third-party apps, your device may fail to work properly. In this case,
you can enter Safe mode to check whether the problem has been caused by a third-party app
or by the system itself.
If the system is running properly in Safe mode, the issue is likely caused by a third-party
app. In Safe mode, go to
and uninstall it after switching back to the normal mode.
If the system runs abnormally in Safe mode, then the system is faulty. Back up your data
and take your device and proof of purchase to an authorised Huawei Customer Service
Centre for assistance.
on the Smart Unlock settings screen.
on an app preview. To unpin, swipe up twice from
to access the recent tasks screen, and touch
Settings > Apps > Apps, find the third-party app in question,
.
Settings
60

Advertisement

Table of Contents
loading

This manual is also suitable for:

Agrk-w09Agrk-l09

Table of Contents