Table of Contents
Advertisement
Vibrate Mode and More Sound Settings
1
Go to
Settings > Sounds & vibration, and enable or disable Vibrate in silent mode
according to your preferences.
2
Touch More sound settings. Then you can set the sound for the following items:
Keypad tones
•
Screen lock
•
Screenshot
•
Screen touch
•
Vibrate on touch
•
Startup sound
•
This feature may vary by device.
Do Not Disturb
Do Not Disturb helps you prevent interruptions when you need to focus. When this mode is
enabled, calls and messages will be muted and banner notifications will not be displayed.
Enable or Disable Do Not Disturb
You can enable or disable Do not disturb using either of the following methods:
Swipe down from the status bar to open the notification panel, then swipe down again to
•
display all shortcuts. Touch
hold
to access the Do Not Disturb settings screen.
This feature is not supported on Wi-Fi only tablets.
Go to
Settings > Sounds & vibration > Do Not Disturb, and enable or disable Do Not
•
Disturb.
When Do not disturb is enabled,
notifications on the lock screen or by swiping down from the status bar to open the
notification panel. Swipe left on a notification and touch
When you receive calls, notifications, or messages, they will be muted, the screen will not
light up, and banner notifications will not be displayed.
Set a Schedule for Do Not Disturb
1
Go to
Settings > Sounds & vibration > Do Not Disturb, and disable Do Not Disturb.
2
Enable Scheduled. Your device will enter Do not disturb mode at the specified time on
Saturdays and Sundays by default.
3
Touch Scheduled to set the time frame and repeat cycle.
to enable or disable Do Not Disturb. You can touch and
will be displayed in the status bar. You can check for
to delay the notification.
Settings
52
Advertisement
Table of Contents
