https://appliancetechmanuals.com
7-2-4 Fill / Park Position
1. Once a normal harvest mode has been completed, the water solenoid will be activated.
2. The amount of water is adjusted by pressing the water supply control S/W. This changes the time allowed for fill as
illustrated in the chart.
<Water supply amount TABLE>
STAGE
TIME TO SUPPLY
1
2
3
4
5
NOTE : Below is an example used by another vendor as an explanation of what is taking place.
INDICATIONS
6 sec.
6.5 sec.
7 sec.
7.5 sec.
8 sec.
The water amount will vary depending
on the water control Switch setting, as
well as the water pressure of the
connected water line.
- 20 -
REMARKS