Citizen CT-D101 Series Programming Manual page 113

* When this SDK works with logging, it performs uncomfortably because a log file will be updated
at every method and accessing properties.
* Because of the following reasons or else, log data will not be stored without any notification.
- A folder where is not under the local folder is specified.
- A folder or file without permission is specified.
- A write-protected log file is already existing.
- Another program (such as a text editor) is using (locking) the log file.
- There is not enough space to store log data in the device.
4.4.2. List of Constants Predefined
No Type
1 Result/Error
2 Interface to connect
Status
3
Name
CSC_SUCCESS
CSC_E_CONNECTED
CSC_E_DISCONNECT
CSC_E_NOTCONNECT
CSC_E_CONNECT_OFFLINE
CSC_E_ILLEGAL
CSC_E_OFFLINE
CSC_E_FAILURE
CSC_PORT_WiFi
CMP_PORT_Bluetooth
CSC_SUE_POWER_ONLINE
CSC_SUE_POWER_OFF
CITIZEN UWP POS Print SDK - Programming Manual
Data
Value
type
int 0 Successfully completed
int 1001 Already connected
int 1002 Not connected
int 1003 Failed to connect
int 1005 Failed printer status
int 1101 Unsupported or invalid parameter
int 1102 Off-line
int 1104 Process failure
int 0 Network
int 1 Bluetooth
int 2001
int 2002
113
Description
Device is ready
Connection fault or not connected
to the printer