[Network Setup] - Dukane 6542W User Manual

Expand
Off
Gray scale1
Gray scale2
Gray scale3
Gray scale4
Color bar
Red
Green
Blue
Cross hatch

[Network setup]

Function: This function is designed to allow the computer control the projector remotely via intranet.
1.Required equipment: Projector, computer, network cable
2.Connection:
Connect your projector to a router or switch in the LAN with normal or jumper network cable. In case a normal net-
work cable failed to connect successfully, use a jumper cable instead.
3.Turn on the computer. The LAN port on computer and projector are flashing after power on the projector.
Operation steps
1. Power on your projector.
2. Acquire the IP address, with DHCP set to on and auto IP allocation set to On. (You may set DHCP to Off and set
up IP address manually if you are somehow familiar with networking.)
3. Enter the network setup menu
(1) Press MENU button on remote controller or top of the control panel, press
(2) Press button select network settings and press ENTER button to enter.
MAC address......Display the MAC address of wired network.
IP address...........Display the ip address of wired network.
(3) Press button to set DHCP On to obtain an IP address, subnet , gateway and DNS automatically , and
press ENTER button to confirm.
button to set DHCP off, then press ENTER button to enter an IP address, then press ▼ button to select
Press
subnet , gateway and dns automatically.and press ENTER button to confirm.
Expand
Network Setup
Network setting
Network information
MAC address:
IP address
Test pattern 1/2
Wired LAN
7C:6F:F8:4E:B9:2F
192.168.1.100
Wireless LAN
： Move
Expand
White
Black
Raster gray
DHCP On
IP address . . .
Subnet . . .
Gateway . . .
DNS . . .
Set Cancel
Setting On
Set Cancel
： Next ： Back
ENTER EXIT
51
5. Using On-Screen Menu
Test pattern 2/2
button to select LAN icon.
Wired LAN
DHCP off
IP address 192 . 168 .
Subnet 255 . 255 . 255 . 0
Gateway 192 . 168 .
DNS 0
Wireless LAN
Setting On
Set
： Move ： Next
ENTER
1 . 1
1 . 1
. 0 . 0 . 0
Cancel
： Back
EXIT