Table of Contents
Advertisement
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
P32u
Screen Controls
Advanced Setup
Options
OSD Setting
Exit
Input:
DisplayPort
Resolution:
To use the controls:
1. Press
to open the main OSD menu.
2. Use
or
to move among the icons. Select an icon and press
there is a sub-menu, you can move between options using
that function. Use
or
3. Press
to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
for 10 seconds to lock the OSD. This will prevent accidental adjustments
to the OSD. Press and hold
the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold
disable / enable DDC/CI function. The words "DDC/CI disable" shows on the screen.
Brightness
85
Contrast
30
Volume
50
2560 x 1440
Color Mode:
sRGB
to make adjustments. Press
for 10 seconds to unlock the OSD and allow adjustments to
100
70
Volume:
60
to access that function. If
or
, then press
to select
to save.
for 10 seconds to
Chapter 2.
2-4
Advertisement
Table of Contents
