Table of Contents
Advertisement
5. Changing the settings of the selected programme
Take care not to trap any items of clothing between the loading
²
door and rubber seal.
Close the door.
The main menu for the selected programme is indicated again on
the display panel.
You can use the displayed presettings or adjust the selected
programme optimally to the items of washing by changing the
presettings or selecting additional settings/options.
Ø
– If the buttons are held down, the set values automatically run
²
– The respective programme duration is displayed by selecting
16
×
60
1400
°C
Ö
Select Temperature, Spin, Ready in. Refer to ~ Page 28:
Selecting and changing e.g. the Temperatura (Temperature):
×
70
60
1400
°C
50
Ö
The arrows on the display panel indicate which buttons are
used to change the settings. The settings are active without
acknowledgement and are displayed in the main menu.
through.
the programme. The programme duration is adjusted while
the programme is running if the programme duration requires
changing, e.g. due to changes in the programme settings/
options, foam detection, unbalanced load detection, the load
or soiling.
×
×
2:31
0
Ö
Ö
×
×
2:31
0
Ö
Ö
˜
h
˜
h
Advertisement
Table of Contents
