Operation - Husky HOTC6212B11S Use And Care Manual

Operation

1
Locking and unlocking the unit
IMPORTANT : The drawers must be fully closed before
locking / unlocking the unit.
□ To lock the unit, insert the key (I) into the lock (J) and turn
it one quarter turn counterclockwise. Then remove the key.
□ To unlock the unit, insert the key (I) into the lock (J) and
turn it one quarter turn clockwise. Then remove the key.
I
3
Lifting the extendable table
□
Lift the extendable table (P) to raise into position.
Make sure it is locked to the mechanism properly before
releasing your hands.
o
2
4
P
x
7
Removing/installing the drawers
Removing the drawers -
□ Fully extend and empty the drawer.
□ On the slide, lift up the plastic release lever on one slide
and push down the plastic release lever on the other slide.
Gently pull the drawer out so the slides can ride over
the stops.
Installing the drawers -
□ Pull the slides and slide carrier out until fully extended .
□ Hold the slide on the cabinet while aligning it with
the slide on the drawer.
□
Slightly insert one side and repeat for the other side.
□ Slowly push the drawer until it is fully closed to
engage the slide.
□ Open the drawer and close it to verify proper
operation.
Lowering the extendable table
□ Lower the extendable table (P) when not in use. Press the
stopper in each side together, lift the woodtop up slightly
and let it down slowly.
P
Please contact 1-888-HD-HUSKY for further assistance.
HUSKYTOOLS.COM