Faxing
Printer model
XC2235
XC4240
XC4240i
1
Needs a subscription. For more information, go to
you purchased the printer.
2
Needs an installed license bundle. For more information, contact the place where you purchased the printer.
Setting up the fax function using analog fax
Notes:
•
This feature is available only in some printer models.
•
Some connection methods are applicable only in some countries or regions.
•
If the fax function is enabled and not fully set up, then the indicator light may blink red.
•
If you do not have a TCP/IP environment, then use the control panel to set up fax.
Warning—Potential Damage: To avoid loss of data or printer malfunction, do not touch cables or the printer
in the area shown while actively sending or receiving a fax.
Using the Settings menu in the printer
1
From the control panel, navigate to:
Settings > Fax > Fax Setup > General Fax settings
For non-touch-screen printer models, press
2
Configure the settings.
Analog fax
X
1
Fax server
etherFAX
https://www.etherfax.net/lexmark
to navigate through the settings.
Fax over IP (FoIP)
or contact the place where
63
2