Lexmark CX522 User Manual page 279

Notices
To return Lexmark cartridges for reuse or recycling, do the following:
1
Go to www.lexmark.com/recycle.
2
Select the product that you want to recycle.
Static sensitivity notice
This symbol identifies static-sensitive parts. Do not touch the areas near these symbols without first touching
a metal surface in an area away from the symbol.
To prevent damage from electrostatic discharge when performing maintenance tasks such as clearing paper
jams or replacing supplies, touch any exposed metal frame of the printer before accessing or touching interior
areas of the printer even if the symbol is not present.
ENERGY STAR
Any Lexmark product bearing the ENERGY STAR
comply with Environmental Protection Agency (EPA) ENERGY STAR requirements as of the date of manufacture.
Temperature information
Operating temperature and relative humidity
Printer / cartridge / imaging unit long-
1
term storage
Printer / cartridge / imaging unit short-term
shipping
1
Supplies shelf life is approximately 2 years. This is based on storage in a standard office environment at 22°C (72°F)
and 45% humidity.
2
Wet-bulb temperature is determined by the air temperature and the relative humidity.
®
emblem on the product or on a start-up screen is certified to
10 to 32.2°C (50 to 90°F) and 15 to 80% RH
15.3 to 32.2°C (60 to 90°F) and 8 to 80% RH
Maximum wet bulb temperature
Non-condensing environment
-40 to 43.3°C (-40 to 110°F)
2
: 22.8°C (73°F)
279