Vizio S4251WB4OM Quick Start Manual page 16

Function LED Behavior
Subwoofer Levels Two center LEDs
indicate Subwoofer
Subwoofer
Surround On/Off
Surnd
TruVolume On/Off
TruVol
Night Mode On/Off Night Mode On:
Night
Night Mode Off:
TV Remote TV Remote On:
VZtv Rmt On
Eco Power On/Off
EcoPwr On
Program Remote
Prg Remote
Reset
Reset No
Press the Next/Previous button to increase/decrease the level of the subwoofer.
The LED indicators will move to the right with increasing levels and to the left
level 0. with decreasing levels.
Surround On: Press the Next/Previous button to enable/disable Surround. When enabled
(On), all inputs will produce 5.1 surround sound. When disabled (Off), 5.1
Surround Off: surround sound sources will be downmixed to 2.1 stereo.
TruVolume On: Press the Next/Previous button to enable/disable TruVolume. When enabled
(On), TruVolume provides a consistent and comfortable volume level for a more
TruVolume Off: enjoyable multimedia experience.
Press the Next/Previous button to enable/disable Night Mode. When enabled
(On), the Sound Bar will lower bass frequency levels to provide a more quiet
environment (ideal for apartment living and homes with sleeping children).
Press the Next/Previous button to enable/disable VIZIO TV Remotes. When
enabled (On), you can use a VIZIO TV remote control to turn on the Sound Bar
TV Remote Off: (using the TV Volume Up button) and control volume.
Eco Power On: Press the Next/Previous button to enable/disable Eco Power Mode. When
enabled (On), the Sound Bar will go into standby after a period of inactivity.
Eco Power Off:
Note: Enable this function if using a TV remote to control the sound bar.
Press the Next/Previous and Play buttons to toggle and select and program
your TV remote to control the Volume Down, Volume Up, and Mute functions on
---
your Sound Bar. See " Program Remote " on page 17 for more information.
Press the Next/Previous and Play buttons to select and reset your remote and
Sound Bar to the factory default settings. All paired Bluetooth devices will be
---
unpaired. All programmed IR remotes will also be removed. See " Reset to Factory
Default Settings " on page 18 for more information.
Description
16