Adjusting Sound Bar Settings - Vizio S4251WB4OM Quick Start Manual

ADJUSTING SOUND BAR SETTINGS

Press the Menu button and use the Up/Down Arrow buttons on the remote to access the different functions and acoustic settings
of the Sound Bar. Each function and setting will be displayed on the remote control's LCD display. The LED Indicators will behave
differently with each function.
Function LED Behavior
Bluetooth Pairing (When searching for device)
Flash from Left to Right
and back continuously.
BT Pair
Bass Levels
indicate Bass level 0.
Bass
Treble Levels
indicate Treble level 0.
Treble
Center Levels
indicate sound is
Center
Surround Levels
indicate surround is
Surround
Surround Balance
indicate surround
Surr Bal
balance is centered.
Press the Enter button on the remote. The Sound Bar will be discoverable for
15 minutes. You can now search for the Sound Bar (VIZIO S4251w) using your
Bluetooth Device. The sound bar will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.
Two center LEDs Press the Next/Previous button to increase/decrease the bass level. The LED
indicators will move to the right with increasing levels and to the left with
decreasing levels.
Two center LEDs Press the Next/Previous button to increase/decrease the treble level. The
LED indicators will move to the right with increasing levels and to the left with
decreasing levels.
Two center LEDs Press the Next/Previous button to increase/decrease the presence of the center
channel. The LED indicators will move to the right when the center presence is
centered. increased and to the left when the center presence is decreased.
Two center LEDs Press the Next/Previous button to increase/decrease the surround sound level.
The LED indicators will move to the right with increasing levels and to the left with
centered. decreasing levels.
Two center LEDs Press the Next/Previous button to move the Surround Balance level towards the
left/right rear channel speaker. The LED indicators will move to the right when
levels are adjusted to the right and to the left when adjusted to the left.
LED Indicators are located here:
Description
15