Section 7: Wiring; Electrical Safety Instructions - Grizzly G4173 Owner's Manual

these pages are current at the time of printing. however, in the spirit of improvement, we may make changes
to the electrical systems of future machines. study this diagram carefully. if you notice differences between
your machine and these wiring diagrams, call technical support at (570) 546-9663 for assistance.

Electrical Safety instructions

1. ciRcuit REQuiREMENtS. you MUst fol-
low the ciRcuit REQuiREMENtS given on
Page 9. if you are unsure about the wiring
codes in your area or you plan to connect
your machine to a shared circuit, consult
a qualified electrician.
2. SHOcK HazaRD. disconnect the power
from the machine before servicing electrical
components. touching electrified parts will
result in personal injury including but not lim-
ited to severe burns, electrocution, or death.
Model g4173 ⁄ hp power Feeder
1
8

SEctiON 7: WiRiNG

NOTICE
the photos and diagrams included in this
section are best viewed in color. you can view
these pages in color at www.grizzly.com.
3. MOtOR WiRiNG. the motor wiring shown
in these diagrams are current at the time of
printing, but it may not match your machine.
always use the wiring diagram inside the
motor junction box.
4. EXPERiENciNG DiFFicuLtiES. if at any
time you are experiencing difficulties under-
standing the information included in this sec-
tion, contact our technical support at (570)
546-9663.
-23-