Yamaha LF225 Owner's Manual page 103

1
1. Cooling water inlet cover
2. Bolt
4. Remove the gear oil drain screw and
gasket.
2
1
1. Gear oil drain screw
2. Gasket
5. Remove the oil level plug and gasket to
allow the gear oil to drain completely.
NOTICE: Check the used gear oil after
it has been drained. If the gear oil is
milky or contains water or a large
amount of metal particles, the gear
case may be damaged. Have a
Yamaha dealer check and repair the
outboard motor.
TIP:
For disposal of used gear oil, consult your
Yamaha dealer.
1
2
ZMU07189
ZMU07190
[ECM00714]
1 2
1. Oil level plug
2. Gasket
6. Remove any metal particles on the mag-
netic gear oil drain screw. NOTICE: If
there is an excessive quantity of met-
al particles on the magnetic gear oil
drain screw, this can indicate lower
unit problem. Consult your Yamaha
dealer.
[ECM01901]
7. Place the outboard motor in a vertical
position. Using a flexible or pressurized
filling device, inject the gear oil into the
gear oil drain screw hole.
Maintenance
ZMU07191
96