Table of Contents
Advertisement
Technical assistance
In the event of your appliance requiring technical assistance and/or
spare parts, please contact CDA Customer Care.
CDA Customer Care
Phone: 01949 862 012
Email: customer.care@cda.eu
In this case it is necessary to state all the appliance data on the rating
plate, such as model, serial number etc. This information can be found
on the outer rim of the oven chamber when the door is opened and
also on the back or side of the exterior of the oven.
Problem
The appliance does not
work
Oven lighting does not
work
Electronic programmer
display shows 0.00
Fan does not work
If the problem is not solved, disconnect the power supply and
report the fault.
Important! All repairs must be performed by qualified service
technicians
26 | Instruction Manual
Reason
No power
Loose or damaged bulb
The oven was disconnected
from the mains or there was a
temporary power cut
Risk of overheating! Unplug the appliance immediately or
switch off the main circuit breaker. Contact the Customer
Care Department
Solution
Check the fuse, replace
if blown
Replace bulb if blown
(see page 21)
Set the current time (see
page 6)
Advertisement
Table of Contents
