Brother Innov-is F440E Operation Manual page 45

Attaching the Embroidery Frame
■ Removing the embroidery frame
a Raise the presser foot lever to raise the presser foot.
b While pushing the lever of the embroidery frame
holder to the left, slightly lift the back and then the
front of the embroidery frame up to clear the pins and
then remove.
Hold the lever lightly to the left.
a
1 Lever
Remove the back mounting bracket from the pin.
b
1 Back mounting bracket
2 Back pin
Remove the front mounting bracket from the pin.
1 Front mounting bracket
2 Front pin
CAUTION
• Do not hit the needle with your finger or the
embroidery frame. It may cause injury or
needle breakage.
B-34
a
a
b