Page 1 E400 series Online Manual Read Me First Useful Functions Available on the Machine Overview of the Machine Printing Copying Scanning Troubleshooting English...
Page 2: Table Of Contents
Contents Read Me First........... 11 How to Use the Online Manual.
Page 3 Envelopes..............57 Loading Originals.
Page 4 Changing the Machine Operation Mode..........114 Changing the Machine Settings Using the Operation Panel.
Page 5 Canon IJ Status Monitor Description........
Page 6 Copying............267 Making Copies.
Page 7 Adjusting Tone Curve............375 Setting Threshold.
Page 8 Lines Are Misaligned............453 Line Does Not Print or Prints Partially.
Page 9 Easy-WebPrint EX Does Not Start Up or Easy-WebPrint EX Menu Does Not Appear... . . 495 About Errors/Messages Displayed......... . 496 If an Error Occurs.
Page 10 5B01..............536 6000.
Page 11: Read Me First
In addition, Canon may suspend or stop the disclosure of this guide due to unavoidable reasons. Canon shall not be liable for any damage suffered by customers as a result of changes in or deletion of information in this guide, or suspension/stoppage of disclosure of this guide.
Page 12: How To Use The Online Manual
How to Use the Online Manual Symbols Used in This Document Warning Instructions that, if ignored, could result in death or serious personal injury caused by incorrect operation of the equipment. These must be observed for safe operation. Caution Instructions that, if ignored, could result in personal injury or material damage caused by incorrect operation of the equipment.
Page 13: Trademarks And Licenses
• Photo Rag is a trademark of Hahnemühle FineArt GmbH. • Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A. and licensed to Canon Inc. Note • The formal name of Windows Vista is Microsoft Windows Vista operating system.
Page 14: Search Tips
Enter keywords in the search window and click (Search). You can search for target pages in this guide. Entry example: "(your product's model name) load paper", "(your product's model name) 1000" Search Tips You can search for target pages by entering keywords in the search window. Note •...
Page 15 Note • The displayed screen varies depending on your product. • Searching for Application Functions Enter your application's name and a keyword for the function you want to learn about Example: When you want to learn how to print collages with My Image Garden Enter "My Image Garden collage"...
Page 16: Notes On Operation Explanations
Notes on Operation Explanations In this guide, most of the operations are described based on the windows displayed when Windows 8 operating system (called Windows 8 below) is used.
Page 17: Useful Functions Available On The Machine
Useful Functions Available on the Machine The following useful functions are available on the machine. Enjoy pleasant photography experience by utilizing various functions. Useful Functions Available from Applications and the Main Unit You can create items such as collages easily or download delightful printing materials, and print them.
Page 18: Useful Functions Available From Applications And The Main Unit
Useful Functions Available from Applications and the Main Unit On the machine, the following useful functions are available from applications and the main unit. • Print Photos Easily • Download Content Materials Print Photos Easily Using an Application Organize Images Easily In My Image Garden, you can register the names of people and events to photos.
Page 19 PREMIUM Contents can be downloaded easily via My Image Garden. Downloaded PREMIUM Contents can be printed directly with My Image Garden. To download PREMIUM Contents, make sure that genuine Canon ink tanks/ink cartridges are installed for all colors on a supported printer.
Page 20 Note • The designs of PREMIUM Contents provided in this page are subject to change without prior notice.
Page 21: Overview Of The Machine
Overview of the Machine Safety Guide Safety Precautions Regulatory and Safety Information Main Components and Basic Operations Main Components About the Power Supply of the Machine Loading Paper / Originals Loading Paper Loading Originals Replacing a FINE Cartridge Replacing a FINE Cartridge Checking the Ink Status Maintenance When Printing Becomes Faint or Colors Are Incorrect...
Page 22: Safety Guide
Safety Guide Safety Precautions Regulatory and Safety Information...
Page 23: Safety Precautions
Safety Precautions Choosing a location • Do not install the machine in a location that is unstable or subject to excessive vibration. • Do not install the machine in locations that are very humid or dusty, in direct sunlight, outdoors, or close to a heating source.
Page 24: Regulatory And Safety Information
Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Park...
Page 25 Canon does not recommend extending the Activation Times from the optimum ones set as default. ®...
Page 26 Paper types This product can be used to print on both recycled and virgin paper (certified to an environmental stewardship scheme), which complies with EN12281 or a similar quality standard. In addition it can support printing on media down to a weight of 64g/m , lighter paper means less resources used and a lower environmental footprint for your printing needs.
Page 27: Main Components And Basic Operations
Main Components and Basic Operations Main Components About the Power Supply of the Machine...
Page 28: Main Components
Main Components Front View Rear View Inside View Operation Panel...
Page 29: Front View
Front View document cover Open to load an original on the platen glass. paper support Open to load paper in the rear tray. paper guide Slide to align with the left side of the paper stack. rear tray Load various sizes or types of paper which you can use on the machine. Two or more sheets of the same size and type of paper can be loaded at the same time, and fed automatically one sheet at a time.
Page 30 operation panel Use to change the settings of the machine or to operate it. Operation Panel platen glass Load an original to copy or scan.
Page 31: Rear View
Rear View power cord connector Plug in the supplied power cord. USB port Plug in the USB cable to connect the machine with a computer. Important Do not touch the metal casing. Do not plug in or unplug the USB cable while the machine is printing or scanning originals with the computer.
Page 32: Inside View
Inside View FINE cartridge (ink cartridges) A replaceable cartridge that integrates print head and ink tank. FINE cartridge holder Install the FINE cartridge. The color FINE cartridge should be installed into the left slot and the black FINE cartridge should be installed into the right slot. Note For details on replacing a FINE cartridge, see Replacing a FINE...
Page 33: Operation Panel
Operation Panel * All lamps on the operation panel are shown lit in the illustration below for explanatory purposes. ON button Turns the power on or off. Before turning on the power, make sure that the document cover is closed. Turning the Machine On and Off ON lamp Lights green after flashing when the power is turned on.
Page 34 Lights or flashes orange when an error occurs, such as paper-out or ink-out. When performing machine maintenance or machine settings, options can be selected according to the number of flashes. ink lamps Light or flash orange when ink runs out, etc. The upper lamp indicates the black FINE cartridge status, the lower lamp the color FINE cartridge status.
Page 35: About The Power Supply Of The Machine
About the Power Supply of the Machine Confirming that the Power Is On Turning the Machine On and Off Notice for the Power Plug/Power Cord Notice for Unplugging the Power Cord...
Page 36: Confirming That The Power Is On
Confirming that the Power Is On The ON lamp is lit green when the machine is turned on. Note It may take a while for the machine to start printing immediately after you turn on the machine.
Page 37: Turning The Machine On And Off
Turning the Machine On and Off Turning on the machine Press the ON button to turn on the machine. The ON lamp flashes and then remains lit green. Confirming that the Power Is On Note It may take a while for the machine to start printing immediately after you turn on the machine.
Page 38 Important When you unplug the power cord after turning off the machine, be sure to confirm that the ON lamp is off. Notice for Unplugging the Power Cord Note Auto power off feature You can set the machine to automatically turn off when no operations are performed or no print jobs are sent to the machine for a certain interval.
Page 39: Notice For The Power Plug/Power Cord
Notice for the Power Plug/Power Cord Unplug the power cord once a month to confirm that the power plug/power cord does not have anything unusual described below. The power plug/power cord is hot. The power plug/power cord is rusty. The power plug/power cord is bent. The power plug/power cord is worn.
Page 40: Notice For Unplugging The Power Cord
Notice for Unplugging the Power Cord To unplug the power cord, follow the procedure below. Important When you unplug the power cord, press the ON button, then confirm that the ON lamp is off. Unplugging the power cord while the ON lamp is lit or flashing may cause drying or clogging of the print head and print quality may be reduced.
Page 41: Loading Paper / Originals
Loading Paper / Originals Loading Paper Loading Originals...
Page 42: Loading Paper
Loading Paper Loading Plain Paper / Photo Paper Loading Envelopes Media Types You Can Use Media Types You Cannot Use Printing Area...
Page 43: Loading Plain Paper / Photo Paper
If you cut plain paper into small size such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) to perform trial print, it can cause paper jams. Note We recommend Canon genuine photo paper for printing photos. For details on the Canon genuine paper, see Media Types You Can Use.
Page 44 Slide the paper guide to the left, and load the paper against the far right of the rear tray WITH THE PRINT SIDE FACING YOU. Slide the paper guide to align it with the paper stack. Do not slide the paper guide too hard against the paper. The paper may not be fed properly.
Page 45 Note Do not load sheets of paper higher than the load limit mark (D). Note The machine may make operating noise when feeding paper. After loading paper Select the size and type of the loaded paper on the print settings screen of the printer driver.
Page 46: Loading Envelopes
Loading Envelopes You can load Envelope DL and Envelope Com 10. The address is automatically rotated and printed according to the envelope's direction by specifying with the printer driver properly. Important Printing of envelopes from the operation panel is not supported. Do not use the following envelopes.
Page 47 Open the paper support. Pull out the paper output tray and the output tray extension. Slide the paper guide to the left, and load the envelopes against the far right of the rear tray WITH THE PRINT SIDE FACING YOU. The folded flap of the envelope will be faced up on the left side.
Page 48 Note Do not load sheets of paper higher than the load limit mark. Note The machine may make operating noise when feeding paper. After loading envelopes Select the size and type of the loaded envelopes on the print settings screen of the printer driver.
Page 49: Media Types You Can Use
Envelopes Canon genuine papers The Model Number of Canon genuine paper is shown in brackets. Refer to the instruction manual supplied with the paper for detailed information on the printable side and notes on handling paper. For information on the page sizes available for each Canon genuine paper, access our website.
Page 50 You can use paper in the following weight range. 17 to 28 lb (64 to 105 g /m ) (except for Canon genuine paper) Do not use heavier or lighter paper (except for Canon genuine paper), as it could jam in the machine. Notes on Storing Paper Take out only the necessary number of paper from the package, just before printing.
Page 51: Paper Load Limit
Plain Paper (including recycled paper) Approx. 60 sheets Approx. 10 sheets Envelopes 5 envelopes Canon Genuine Papers Note We recommend that you remove the previously printed sheet from the paper output tray before continuously printing to avoid blurs and discoloration. Paper for printing photos: Media Name <Model No.>...
Page 52: Media Types You Cannot Use
Paper that is too thin (weighing less than 17 lb (64 g /m Paper that is too thick (weighing more than 28 lb (105 g /m ), except for Canon genuine paper) Paper thinner than a postcard, including plain paper or notepad paper cut to a small...
Page 53: Printing Area
Printing Area Printing Area Other Sizes than Letter, Legal, Envelopes Letter, Legal Envelopes...
Page 54: Printing Area
To ensure the best print quality, the machine allows a margin along each edge of media. The actual printable area will be the area inside these margins. Recommended printing area : Canon recommends that you print within this area. Printable area : The area where it is possible to print.
Page 55: Other Sizes Than Letter, Legal, Envelopes
Other Sizes than Letter, Legal, Envelopes Size Printable Area (width x height) 5.56 x 7.49 inches (141.2 x 190.3 mm) 8.00 x 10.92 inches (203.2 x 277.3 mm) 6.90 x 9.34 inches (175.2 x 237.3 mm) 4" x 6" (10 x 15 cm) 3.73 x 5.22 inches (94.8 x 132.7 mm) 5"...
Page 56: Letter, Legal
Letter, Legal Size Printable Area (width x height) Letter 8.00 x 10.22 inches (203.2 x 259.7 mm) Legal 8.00 x 13.22 inches (203.2 x 335.9 mm) Recommended printing area 1.24 inches (31.6 mm) 1.15 inches (29.2 mm) Printable area 0.12 inches (3.0 mm) 0.66 inches (16.7 mm) 0.25 inches (6.4 mm) 0.25 inches (6.3 mm)
Page 57: Envelopes
Envelopes Size Recommended Printing Area (width x height) Envelope DL 3.88 x 7.06 inches (98.8 x 179.5 mm) Envelope Com 10 3.68 x 7.90 inches (93.5 x 200.8 mm) Recommended printing area 0.31 inches (8.0 mm) 1.28 inches (32.5 mm) 0.22 inches (5.6 mm) 0.22 inches (5.6 mm)
Page 58: Loading Originals
Loading Originals Loading Originals on the Platen Glass Originals You Can Load...
Page 59: Loading Originals On The Platen Glass
Loading Originals on the Platen Glass You can load originals to copy or scan on the platen glass. Load an original on the platen glass. Open the document cover. Important Do not place any object on the document cover. It will fall into the rear tray when the document cover is opened and cause the machine to malfunction.
Page 60 Close the document cover gently. Important After loading the original on the platen glass, be sure to close the document cover before starting to copy or scan.
Page 61: Originals You Can Load
Originals You Can Load The originals you can load on the platen glass are as follows. Item Details - Text document, magazine, or newspaper Types of originals - Printed photo, postcard, business card, or disc (BD/DVD/CD, etc.) Size (width x height) Max.
Page 62: Replacing A Fine Cartridge
Replacing a FINE Cartridge Replacing a FINE Cartridge Checking the Ink Status...
Page 63: Replacing A Fine Cartridge
Replacing a FINE Cartridge When remaining ink cautions or errors occur, the ink lamps and the Alarm lamp will flash orange to inform you of the error. Count the number of flashes and take appropriate action. If an Error Occurs Note For information on the compatible FINE cartridge, refer to the printed manual: Safety and Important Information.
Page 64 Even when printing with one ink only, print with leaving the empty FINE cartridge installed. If either of the color FINE cartridge or black FINE cartridge is not installed, an error occurs and the machine cannot print. For information on how to configure this setting, see Setting the Ink Cartridge to be Used.
Page 65 Push down the FINE cartridge until it clicks. Remove the FINE cartridge. Important Handle the FINE cartridge carefully to avoid staining of clothing or the surrounding area. Discard the empty FINE cartridge according to the local laws and regulations regarding disposal of consumables. Prepare a new FINE cartridge.
Page 66 Important If you shake a FINE cartridge, ink may spill out and stain your hands and the surrounding area. Handle a FINE cartridge carefully. Be careful not to stain your hands and the surrounding area with ink on the removed protective tape.
Page 67 Important Insert the FINE cartridge gently so that it does not hit the electrical contacts on the FINE cartridge holder. Push the FINE cartridge in and up firmly until it snaps into place.
Page 68 Important Check if the FINE cartridge is installed correctly. The machine cannot print unless both the color FINE cartridge and black FINE cartridge are installed. Be sure to install both cartridges. Close the cover. Note If the Alarm lamp lights or flashes orange after the cover is closed, take appropriate action.
Page 69: Checking The Ink Status
Checking the Ink Status Checking the Ink Status with the Ink Lamps on the Operation Panel You can also check the ink status on the computer screen. Checking the Ink Status from Your Computer...
Page 70: Checking The Ink Status With The Ink Lamps On The Operation Panel
Checking the Ink Status with the Ink Lamps on the Operation Panel Note The ink level detector is mounted on the machine to detect the remaining ink level. The machine considers as ink is full when a new FINE cartridge is installed, and then starts to detect a remaining ink level.
Page 71 Checking the Ink Status from Your Computer...
Page 72: Maintenance
Maintenance When Printing Becomes Faint or Colors Are Incorrect Performing Maintenance from a Computer Cleaning the Machine...
Page 73: When Printing Becomes Faint Or Colors Are Incorrect
When Printing Becomes Faint or Colors Are Incorrect Maintenance Procedure Printing the Nozzle Check Pattern Examining the Nozzle Check Pattern Cleaning the Print Head Cleaning the Print Head Deeply Aligning the Print Head...
Page 74: Maintenance Procedure
Maintenance Procedure If print results are blurred or colors are not printed correctly, the print head nozzle (FINE cartridge) is probably clogged. Follow the procedure below to print the nozzle check pattern, check the print head nozzle condition, then clean the print head. If printed ruled lines are misaligned or print results are otherwise unsatisfactory, aligning the print head may improve print quality.
Page 75 When the Print Results Are Blurred or Uneven: Step 1 Print the nozzle check pattern. From the machine Printing the Nozzle Check Pattern From the computer Use Your Computer to Print a Nozzle Check Pattern Examine the nozzle check pattern. After cleaning the print head, Examining the Nozzle Check Pattern print and examine the nozzle...
Page 76 Step 4 Replace a FINE cartridge. Replacing a FINE Cartridge Note If the problem is still not resolved after replacing the FINE cartridge, contact the service center. When the Print Results Are Not Even such as the Ruled Lines Are Misaligned: Align the print head.
Page 77: Printing The Nozzle Check Pattern
Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle. Note If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the FINE cartridge whose ink is low. Replacing a FINE Cartridge You need to prepare: a sheet of A4 or Letter-sized plain paper Make sure that the power is turned on.
Page 78: Examining The Nozzle Check Pattern
Examining the Nozzle Check Pattern Examine the nozzle check pattern, and clean the print head if necessary. Check if there are missing lines in the pattern or horizontal white streaks in the pattern (B). Number of sheets printed so far If there are missing lines in the pattern (A): Cleaning the print head is required.
Page 79: Cleaning The Print Head
Cleaning the Print Head Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print head consumes ink, so clean the print head only when necessary.
Page 80: Cleaning The Print Head Deeply
Cleaning the Print Head Deeply If print quality does not improve by the standard cleaning of the print head, clean the print head deeply. Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so clean the print head deeply only when necessary. Make sure that the power is turned on.
Page 81: Aligning The Print Head
Aligning the Print Head If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position. Note If the remaining ink level is low, the print head alignment sheet will not be printed correctly. Replace the FINE cartridge whose ink is low. Replacing a FINE Cartridge You need to prepare: a sheet of A4 or Letter-sized plain paper (including recycled paper)*...
Page 82 Important Do not touch any printed part on the print head alignment sheet. Be careful not to get the print head alignment sheet dirty. If the sheet is stained or wrinkled, it may not be scanned properly. If the print head alignment sheet was not printed correctly, press the Stop button, then redo this procedure from the beginning.
Page 83 Close the document cover gently, then press the Color button or the Black button. The machine starts scanning the print head alignment sheet, and the print head position will be adjusted automatically. The print head position adjustment will be complete when the ON lamp lights green after flashing.
Page 84: Performing Maintenance From A Computer
Performing Maintenance from a Computer Cleaning the Print Heads from Your Computer Cleaning the Paper Feed Rollers from Your Computer Aligning the Print Head Aligning the Print Head Position Automatically from Your Computer Aligning the Print Head Position from Your Computer Use Your Computer to Print a Nozzle Check Pattern Cleaning Inside the Machine...
Page 85: Cleaning The Print Heads From Your Computer
Cleaning the Print Heads from Your Computer The print head cleaning function allows you to clear up clogged print head nozzle. Perform print head cleaning if printing is faint or a specific color fails to print, even though there is enough ink. The procedure for cleaning the print head is as follows: Cleaning 1.
Page 86 When the Deep Cleaning dialog box opens, select the ink group for which deep cleaning is to be performed. Click Initial Check Items to display the items you need to check before performing deep cleaning. 3. Execute deep cleaning Make sure that the machine is on and then click Execute. Click OK when the confirmation message appears.
Page 87: Cleaning The Paper Feed Rollers From Your Computer
Cleaning the Paper Feed Rollers from Your Computer Cleans the paper feed rollers. Perform feed roller cleaning when there are paper particles sticking to the paper feed rollers and paper is not fed properly. The procedure for performing the feed roller cleaning is as follows: Roller Cleaning 1.
Page 88: Aligning The Print Head
Aligning the Print Head When you perform head position adjustment, errors in the print head adjustment position are corrected and conditions such as color and line streaking are improved. If the print results appear uneven because of line shifts or other conditions, adjust the position of the print head.
Page 89: Aligning The Print Head Position From Your Computer
Aligning the Print Head Position from Your Computer Print head alignment corrects the installation positions of the print head and improves deviated colors and lines. This machine supports two head alignment methods: automatic head alignment and manual head alignment. The procedure for performing manual print head alignment is as follows: Print Head Alignment 1.
Page 90 When you have entered all the necessary values, click OK. Note • If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical streaks. (A) Least noticeable vertical streaks (B) Most noticeable vertical streaks •...
Page 91 When you have entered all the necessary values, click OK. Note • If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical streaks. (A) Least noticeable vertical streaks (B) Most noticeable vertical streaks 11.
Page 92 When you have entered all the necessary values, click OK. Note • If it is difficult to pick the best pattern, pick the setting that produces the least noticeable horizontal stripes. (A) Least noticeable horizontal stripes (B) Most noticeable horizontal stripes Note •...
Page 93: Aligning The Print Head Position Automatically From Your Computer
Aligning the Print Head Position Automatically from Your Computer Print head alignment corrects the installation positions of the print head and improves deviated colors and lines. This machine supports two head alignment methods: automatic head alignment and manual head alignment. Normally, the machine is set for automatic head alignment. If the printing results of automatic print head alignment are not satisfactory, perform manual head alignment.
Page 94: Use Your Computer To Print A Nozzle Check Pattern
Use Your Computer to Print a Nozzle Check Pattern The nozzle check function allows you to check whether the print head is working properly by printing a nozzle check pattern. Print the pattern if printing becomes faint, or if a specific color fails to print. The procedure for printing a nozzle check pattern is as follows: Nozzle Check 1.
Page 95: Cleaning Inside The Machine
Cleaning Inside the Machine Perform bottom plate cleaning before you execute duplex printing to prevent smudges on the back side of the paper. Also perform bottom plate cleaning if ink smudges caused by something other than print data appear on the printed page.
Page 96: Cleaning The Machine
Cleaning the Machine Cleaning the Exterior of the Machine Cleaning the Platen Glass and Document Cover Cleaning the Paper Feed Roller Cleaning the Inside of the Machine (Bottom Plate Cleaning) Cleaning the Protrusions inside the Machine...
Page 97: Cleaning The Exterior Of The Machine
Cleaning the Exterior of the Machine Be sure to use a soft and dry cloth such as eyeglasses cleaning cloth and wipe off dirt on the surface gently. Smooth out wrinkles on the cloth if necessary before cleaning. Important Be sure to turn off the power and disconnect the power plug before cleaning the machine.
Page 98: Cleaning The Platen Glass And Document Cover
Cleaning the Platen Glass and Document Cover Important Be sure to turn off the power and disconnect the power plug before cleaning the machine. Do not use tissue paper, paper towels, rough-textured cloth, or similar materials for cleaning so as not to scratch the surface. Be sure to use a soft and dry cloth. Never use volatile liquids such as thinners, benzene, acetone, or any other chemical cleaner to clean the machine, as this may cause a malfunction or damage the surface of the machine.
Page 99: Cleaning The Paper Feed Roller
Cleaning the Paper Feed Roller If the paper feed rollers are dirty or paper powder is attached to it, paper may not be fed properly. In this case, clean the paper feed rollers. Cleaning will wear out the paper feed rollers, so perform this only when necessary.
Page 100 After cleaning the paper feed rollers, turn on the power, then clean the paper feed rollers again. If the problem is not resolved after cleaning the paper feed rollers, contact the service center.
Page 101: Cleaning The Inside Of The Machine (Bottom Plate Cleaning)
Cleaning the Inside of the Machine (Bottom Plate Cleaning) Remove stains from the inside of the machine. If the inside of the machine becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly. You need to prepare: a sheet of A4 or Letter-sized plain paper* * Be sure to use a new piece of paper.
Page 102 The paper cleans the inside of the machine as it feeds through the machine. Check the folded parts of the ejected paper. If they are smudged with ink, perform Bottom Plate Cleaning again. If the problem is not resolved after performing cleaning again, the protrusions inside the machine may be stained.
Page 103: Cleaning The Protrusions Inside The Machine
Cleaning the Protrusions inside the Machine Important Be sure to turn off the power and disconnect the power plug before cleaning the machine. You need to prepare: cotton swab If the protrusions inside the machine are stained, wipe off any ink from the protrusions using a cotton swab or the like.
Page 104: Changing The Machine Settings
Changing the Machine Settings Changing Machine Settings from Your Computer Changing the Machine Settings Using the Operation Panel...
Page 105: Changing Machine Settings From Your Computer
Changing Machine Settings from Your Computer Changing the Print Options Registering a Frequently Used Printing Profile Setting the Ink Cartridge to be Used Managing the Machine Power Reducing the Machine Noise Changing the Machine Operation Mode...
Page 106: Changing The Print Options
Changing the Print Options You can change the detailed printer driver settings for print data that is sent from an application software. Specify this option if you encounter print failures such as part of an image data being cut off. The procedure for changing the print options is as follows: 1.
Page 107: Registering A Frequently Used Printing Profile
Registering a Frequently Used Printing Profile You can register the frequently used printing profile to Commonly Used Settings on the Quick Setup tab. Unnecessary printing profiles can be deleted at any time. The procedure for registering a printing profile is as follows: Registering a Printing Profile 1.
Page 108 Important • To save the page size, orientation, and number of copies that was set in each sheet, click Options..., and check each item. Note • When you re-install the printer driver or upgrade the printer driver version, the print settings that are already registered will be deleted from Commonly Used Settings.
Page 109: Setting The Ink Cartridge To Be Used
Setting the Ink Cartridge to be Used This feature enables you to specify the most appropriate FINE cartridge among installed cartridges according to an intended use. When one of the FINE cartridges becomes empty and cannot be replaced immediately by a new one, you can specify the other FINE cartridge that still has ink and continue printing.
Page 110: Managing The Machine Power
Managing the Machine Power This function allows you to manage the machine power from the printer driver. The procedure for managing the machine power is as follows: Power Off The Power Off function turns off the machine. When you use this function, you will not be able to turn the machine on from the printer driver.
Page 111 Note • When the machine is turned off, the Canon IJ Status Monitor message varies depending on the Auto Power On setting. When the setting is Enable, "Printer is standing by" is displayed. When the setting is Disable,...
Page 112: Reducing The Machine Noise
Reducing the Machine Noise The silent function allows you to reduce the operating noise of this machine. Select when you wish to reduce the operating noise of the printer at night, etc. Using this function may lower the print speed. The procedure for using the quiet mode is as follows: Quiet Settings 1.
Page 113 Note • The effects of the quiet mode may be less depending on the print quality settings.
Page 114: Changing The Machine Operation Mode
Changing the Machine Operation Mode If necessary, switch between various modes of machine operation. The procedure for configuring Custom Settings is as follows: Custom Settings 1. Open the printer driver setup window 2. Make sure that the machine is on, and then click Custom Settings on the Maintenance The Custom Settings dialog box opens.
Page 115: Changing The Machine Settings Using The Operation Panel
Changing the Machine Settings Using the Operation Panel About Quiet setting Turning on/off the Machine Automatically...
Page 116: About Quiet Setting
About Quiet setting Enables this function on the machine if you want to reduce the operating noise, such as when printing at night. Follow the procedure below to perform setting. Make sure that the machine is turned on. 2. Press and hold the Stop button until the Alarm lamp flashes 9 times. 3.
Page 117: Turning On/Off The Machine Automatically
Turning on/off the Machine Automatically You can enable the machine to turn on/off automatically considering the environment Turning on the Machine Automatically Turning off the Machine Automatically Turning on the Machine Automatically You can enable the machine to turn on automatically when you perform printing or scanning operations from the computer.
Page 118: Tips For Ensuring Optimal Printing Quality
Tips for Ensuring Optimal Printing Quality Useful Information about Ink Key Points to Successful Printing Be Sure to Make Paper Settings after Loading Paper Canceling a Print Job Storing Printed Images Machine Handling Precautions Key to Enjoying Consistent Printing Quality Precautions for Safe Transport of the Machine...
Page 119: Useful Information About Ink
Useful Information about Ink How is ink used for various purposes other than printing? Ink may be used for purposes other than printing. Ink is not only used for printing, but also for cleaning the print head to maintain the optimal printing quality. The machine has the function to automatically clean the ink jet nozzles to prevent clogging.
Page 120: Key Points To Successful Printing
Key Points to Successful Printing Check the machine status before printing! Is the print head OK? If a print head nozzle is clogged, print will be faint and papers will be wasted. Print the nozzle check pattern to check the print head. Maintenance Procedure Is the inside of the machine smeared with ink? After printing large quantities of paper, the area where papers go through may get...
Page 121: Be Sure To Make Paper Settings After Loading Paper
Be Sure to Make Paper Settings after Loading Paper If the media type setting is not the one for the loaded paper, printing results may not be satisfactory. After loading paper, be sure to select the appropriate media type setting for the loaded paper.
Page 122: Canceling A Print Job
Canceling a Print Job Never press the ON button! If you press the ON button while printing is in progress, the print data sent from the computer queues in the machine and you may not be able to continue to print. Press the Stop button to cancel printing.
Page 123: Storing Printed Images
Storing Printed Images Store printed images in albums, clear photo sleeves, or glass frames to protect them from direct exposure to air. Note Storing printed images without sufficient drying may cause blurring or discoloration.
Page 124: Machine Handling Precautions
Machine Handling Precautions Do not place any object on the document cover! Do not place any object on the document cover. It will fall into the rear tray when the document cover is opened and cause the machine to malfunction. Also, place the machine where objects will not fall on it.
Page 125: Key To Enjoying Consistent Printing Quality
Key to Enjoying Consistent Printing Quality The key to printing with the optimal printing quality is to prevent the print head from drying or clogging. Always observe the following rules for optimal printing quality. Never disconnect the power plug until the power is turned off! If you press the ON button to turn off the power, the machine caps the print head (nozzles) automatically to prevent from drying.
Page 126: Precautions For Safe Transport Of The Machine
Precautions for Safe Transport of the Machine When relocating the machine, make sure of the following. Important When sending the machine for repair Pack the machine in a sturdy box so that it is placed with its bottom facing down, using sufficient protective material to ensure safe transport.
Page 127 Use adhesive tape to secure all the covers on the machine to keep them from opening during transportation. Then pack the machine in the plastic bag. Attach the protective material to the machine when packing the machine in the box.
Page 128: Legal Limitations On Use Of Your Product And Use Of Images
Legal Limitations on Use of Your Product and Use of Images It may be unlawful to make copies of, scan, print, or use reproductions of the following documents. The list provided is non-exhaustive. When in doubt, check with a legal representative in your jurisdiction.
Page 129: Specifications
Approx. 426 (W) x 306 (D) x 145 (H) mm * With the Paper Support and Paper Output Tray retracted. Approx. 7.6 lb (Approx. 3.5 kg) Weight * With the FINE Cartridges installed. Canon FINE Cartridge Total 1280 nozzles (BK 320 nozzles, C/M/Y each 320 nozzles)
Page 130 Copy Specifications Multiple copy max. 21 pages Scan Specifications Windows: TWAIN 1.9 Specification, WIA Scanner driver Mac OS: ICA Maximum scanning size A4/Letter, 8.5" x 11.7"/216 x 297 mm Optical resolution (horizontal x vertical) max: 600 x 1200 dpi *1 Interpolated resolution max: 19200 x 19200 dpi *2 Scanning resolution *1 Optical Resolution represents the maximum sampling rate...
Page 131 XGA 1024 x 768 Other Supported OS Some functions may not be available with each OS. Refer to the manual or the Canon web site for details on operation with Windows RT. An internet connection is required to view the Online Manual.
Page 132: Printing
Printing Printing from a Computer Printing with Application Software that You are Using (Printer Driver)
Page 133: Printing From A Computer
Printing from a Computer Printing with Application Software that You are Using (Printer Driver)
Page 134: Printing With Application Software That You Are Using (Printer Driver)
Printing with Application Software that You are Using (Printer Driver) Printing with Easy Setup Basic Various Printing Methods Changing the Print Quality and Correcting Image Data Overview of the Printer Driver Printer Driver Description Updating the MP Drivers Sharing the Printer on a Network...
Page 135: Printing With Easy Setup
Printing with Easy Setup This section describes the simple procedure for setting the Quick Setup tab so that you can carry out appropriate printing on this machine. Check that the machine is turned on Load paper on the machine 3. Open the printer driver setup window 4.
Page 136 Important • The print quality settings that can be selected may differ depending on a printing profile. 6. Complete the setup Click OK. When you execute print, the document is printed with settings that match your purpose. Important • When you select the Always Print with Current Settings check box, all settings specified on the Quick Setup, Main, and Page Setup tabs are saved, and you can print with the same settings from the next time as well.
Page 137: Setting The Media Type With The Printer Driver
Media Type in the printer driver Plain Paper (including recycled paper) Plain Paper Envelopes Envelope Canon genuine papers (Photo Printing) Media name <Model No.> Media Type in the printer driver Photo Paper Plus Glossy II <PP-201> Photo Paper Plus Glossy II Photo Paper Glossy <GP-501/GP-601>...
Page 138: Various Printing Methods
Various Printing Methods Setting a Page Size and Orientation Setting the Number of Copies and Printing Order Setting the Stapling Margin Fit-to-Page Printing Scaled Printing Page Layout Printing Tiling/Poster Printing Booklet Printing Duplex Printing Stamp/Background Printing Registering a Stamp Registering Image Data to be Used as a Background Setting Up Envelope Printing Displaying the Print Results before Printing Setting Paper Dimensions (Custom Size)
Page 139: Setting A Page Size And Orientation
Setting a Page Size and Orientation The paper size and orientation are essentially determined by the application software. When the page size and orientation set for Page Size and Orientation on the Page Setup tab are same as those set with the application software, you do not need to select them on the Page Setup tab.
Page 140: Setting The Number Of Copies And Printing Order
Setting the Number of Copies and Printing Order The procedure for specifying the number of copies and printing order is as follows: You can also set the number of copies on the Quick Setup tab. 1. Open the printer driver setup window 2.
Page 141 • Print from Last Page: /Collate: 4. Complete the setup Click OK. When you execute print, the specified number of copies will be printed with the specified printing order. Important • When the application software that you used to create the document has the same function, specify the settings on the printer driver.
Page 142: Setting The Stapling Margin
Setting the Stapling Margin The procedure for setting the staple side and the margin width is as follows: 1. Open the printer driver setup window 2. Specify the side to be stapled Check the position of the stapling margin from Stapling Side on the Page Setup tab. The printer analyzes the Orientation and Page Layout settings, and automatically selects the best staple position.
Page 143 Note • The printer automatically reduces the print area depending on the staple position margin. 4. Complete the setup Click OK on the Page Setup tab. When you execute print, the data is printed with the specified staple side and margin width. Important •...
Page 144: Fit-To-Page Printing
Fit-to-Page Printing The procedure for printing a document that is automatically enlarged or reduced to fit the page size to be used is as follows: 1. Open the printer driver setup window 2. Set fit-to-page printing Select Fit-to-Page from the Page Layout list on the Page Setup tab. 3.
Page 145 5. Complete the setup Click OK. When you execute print, the document will be enlarged or reduced to fit to the page size.
Page 146: Scaled Printing
Scaled Printing The procedure for printing a document with pages enlarged or reduced is as follows: 1. Open the printer driver setup window 2. Set scaled printing Select Scaled from the Page Layout list on the Page Setup tab. 3. Select the paper size of the document Using Page Size, select the page size that is set with your application software.
Page 147 • Specify a scaling factor Directly type in a value into the Scaling box. The current settings are displayed in the settings preview on the left side of the printer driver. 5. Complete the setup Click OK. When you execute print, the document will be printed with the specified scale. Important •...
Page 148 Note • Selecting Scaled changes the printable area of the document.
Page 149: Page Layout Printing
Page Layout Printing The page layout printing function allows you to print more than one page image on a single sheet of paper. The procedure for performing page layout printing is as follows: 1. Open the printer driver setup window 2.
Page 150 Pages To change the number of pages to be printed on a single sheet of paper, select the number of pages from the list. Page Order To change the page arrangement order, select a placement method from the list. Page Border To print a page border around each document page, check this check box.
Page 151: Tiling/Poster Printing
Tiling/Poster Printing The tiling/poster printing function allows you to enlarge image data, divide it into several pages, and print these pages on separate sheets of paper. You can also paste the pages together to create a large print like a poster. The procedure for performing tiling/poster printing is as follows: Setting Tiling/Poster Printing 1.
Page 152 If necessary, click Specify..., specify the following settings in the Tiling/Poster Printing dialog box, and then click OK. Image Divisions Select the number of divisions (vertical x horizontal). As the number of divisions increases, the number of sheets used for printing increases. If you are pasting pages together to create a poster, increasing the number of divisions allows you to create a larger poster.
Page 153 Note • Click the deleted pages to display them again. • Right-click the settings preview to select Print all pages or Delete all pages. 2. Complete the setup After completing the page selection, click OK. When you execute print, only specified pages will be printed. Important •...
Page 154: Booklet Printing
Booklet Printing The booklet printing function allows you to print data for a booklet. Data is printed on both sides of the paper. This type of printing ensures that pages can be collated properly, in page number order, when the printed sheets are folded and stapled at the center.
Page 155 Margin for stapling Select which side should the stapling margin be on when the booklet is completed. Insert blank page To leave one side of a sheet blank, check the check box, and select the page to be left blank. Margin Enter the margin width.
Page 156: Duplex Printing
Duplex Printing The procedure for printing data on both sides of a sheet of paper is as follows: You can also set duplex printing in Additional Features on the Quick Setup tab. 1. Open the printer driver setup window 2. Set duplex printing Check the Duplex Printing (Manual) check box on the Page Setup tab.
Page 157 Click OK on the Page Setup tab. When you execute print, the document is first printed on one side of a sheet of paper. After one side is printed, reload the paper correctly according to the message. Then click Start Printing to print the opposite side. Important •...
Page 158: Stamp/Background Printing
Stamp/Background Printing Stamp or Background may be unavailable when certain printer drivers or operating environments are used. The Stamp function allows you to print a stamp text or a bitmap over or behind document data. It also allows you to print date, time and user name. The Background function allows you to print a light illustration behind the document data.
Page 159 3. Select a stamp Check the Stamp check box, and select the stamp to be used from the list. The current settings are displayed in the settings preview on the left side of the Page Setup tab. 4. Set the stamp details If necessary, specify the following settings, and then click OK.
Page 160 Select Background... button use another background or change the layout or density of a background, click this. Background first page only To print the background only on the first page, check this check box. 5. Complete the setup Click OK on the Page Setup tab. When you execute print, the data is printed with the specified background.
Page 161: Registering A Stamp
Registering a Stamp This feature may be unavailable when certain printer drivers or operating environments are used. You can create and register a new stamp. You can also change and re-register some of the settings of an existing stamp. Unnecessary stamps can be deleted at any time. The procedure for registering a new stamp is as follows: Registering a New Stamp 1.
Page 162 4. Configure the stamp while viewing the preview window • Stamp tab Select Text, Bitmap, or Date/Time/User Name that matches your purpose for Stamp Type. ◦ For Text registration, the characters must already be entered in Stamp Text. If necessary, change the TrueType Font, Style, Size, and Outline settings.
Page 163 6. Complete the setup Click OK. The Stamp/Background (Stamp) dialog box opens again. The registered title appears in the Stamp list. Changing and Registering Some of Stamp Settings 1. Select the stamp for which the settings are to be changed Select the Stamp check box in the Stamp/Background (Stamp) dialog box.
Page 164: Registering Image Data To Be Used As A Background
Registering Image Data to be Used as a Background This feature may be unavailable when certain printer drivers or operating environments are used. You can select a bitmap file (.bmp) and register it as a new background. You can also change and register some of the settings of an existing background.
Page 165 4. Select the image data to be registered to the background Click Select File..Select the target bitmap file (.bmp), and then click Open. 5. Specify the following settings while viewing the preview window Layout Method Select how the background image data is to be placed. When Custom is selected, you can set coordinates for X-Position and Y-Position.
Page 166 The Background Settings dialog box opens. 3. Specify each item on the Background tab while viewing the preview window 4. Save the background Click Save overwrite on the Save settings tab. When you want to save the background with a different title, enter a new title in the Title box and click Save.
Page 167: Setting Up Envelope Printing
Setting Up Envelope Printing The procedure for performing envelope printing is as follows: Load envelope on the machine 2. Open the printer driver setup window 3. Select the media type Select Envelope from Commonly Used Settings on the Quick Setup tab. 4.
Page 168: Displaying The Print Results Before Printing
Displaying the Print Results before Printing If you are using the XPS printer driver, replace "Canon IJ Preview" with "Canon IJ XPS Preview" when reading this information. You can display and check the print result before printing. The procedure for displaying the print result before printing is as follows: You can also set the print results display on the Quick Setup tab.
Page 169: Setting Paper Dimensions (Custom Size)
Setting Paper Dimensions (Custom Size) You can specify the height and width of paper when its size cannot be selected from the Page Size. Such a paper size is called "custom size." The procedure for specifying a custom size is as follows: You can also set a custom size in Printer Paper Size on the Quick Setup tab.
Page 170 Important • When the application software that created the document has a function for specifying the height and width values, use the application software to set the values. When the application software does not have such a function or if the document does not print correctly, use the printer driver to set the values. •...
Page 171: Editing The Print Document Or Reprinting From The Print History
Editing the Print Document or Reprinting from the Print History This function is unavailable when the standard IJ printer driver is used. In the Canon IJ XPS preview window, you can edit the print document or retrieve the document print history to print the document.
Page 172 Check the Preview before printing check box on the Main tab. 3. Complete the setup Click OK. The Canon IJ XPS Preview will start and the print result will be displayed before printing. 4. Editing print documents and print pages • Combining print documents You can combine multiple print documents to form a single document.
Page 173 Check the preview before printing. • Depending on the print settings of the print document, some functions may not be available in the Canon IJ XPS preview. Note • You can rename Document Name to any name.
Page 174: Changing The Print Quality And Correcting Image Data
Changing the Print Quality and Correcting Image Data Setting the Print Quality Level (Custom) Printing a Color Document in Monochrome Specifying Color Correction Optimal Photo Printing of Image Data Adjusting Colors with the Printer Driver Printing with ICC Profiles Adjusting Color Balance Adjusting Color Balance Using Sample Patterns (Printer Driver) Adjusting Brightness Adjusting Intensity...
Page 175: Setting The Print Quality Level (Custom)
Setting the Print Quality Level (Custom) The print quality level can be set in the Custom. The procedure for setting the print quality level is as follows: 1. Open the printer driver setup window 2. Select the print quality On the Main tab, select Custom for Print Quality, and click Set..The Custom dialog box opens.
Page 176 Related Topics Specifying Color Correction Adjusting Color Balance Adjusting Brightness Adjusting Intensity Adjusting Contrast...
Page 177: Printing A Color Document In Monochrome
Printing a Color Document in Monochrome The procedure for printing a color document in monochrome is as follows: You can also set a grayscale printing in Additional Features on the Quick Setup tab. 1. Open the printer driver setup window 2.
Page 178 Note • During Grayscale Printing, inks other than black ink may be used as well.
Page 179: Specifying Color Correction
You can specify the color correction method suited to the type of document to be printed. Normally, the printer driver adjusts the colors by using Canon Digital Photo Color so that data is printed with color tints that most people prefer. This method is suitable for printing sRGB data.
Page 180 Driver Matching With Canon Digital Photo Color, you can print sRGB data with color tints that most people prefer. ICM (ICC Profile Matching) Adjusts the colors by using an ICC profile when printing. Specify the input profile to be used.
Page 181: Optimal Photo Printing Of Image Data
Describes the procedure for printing sRGB data by using the color correction function of the printer driver. • To print using Canon Digital Photo Color The printer prints data with color tints that most people prefer, reproducing colors of the original image data and producing three-dimensional effects and high, sharp contrasts.
Page 182: Adjusting Colors With The Printer Driver
You can specify the color correction function of the printer driver to print sRGB data with color tints that most people prefer through the use of Canon Digital Photo Color. When printing from an application software that can identify ICC profiles and allows you to specify them, use a printing ICC profile in the application software, and select settings for color management.
Page 183 Adjusting Brightness Adjusting Intensity Adjusting Contrast...
Page 184: Printing With Icc Profiles
Specify an ICC Profile from the Application Software and Print the Data When you print the editing and touch-up results of Adobe Photoshop, Canon Digital Photo Professional, or any application software that allows you to specify input and printing ICC profiles, you print by effectively using the color space of the input ICC profile specified in the image data.
Page 185 5. Complete the setup Click OK on the Main tab. When you execute print, the machine uses the color space of the image data. Specify an ICC Profile with the Printer Driver, and then Print Print from an application software that cannot identify input ICC profiles or does allow you to specify one by using the color space of the input ICC profile (sRGB) found in the data.
Page 186 Important • When the application software specifies an input profile, the input profile setting of the printer driver becomes invalid. • When no input ICC profiles are installed on your computer, Adobe RGB (1998) will not be displayed. 5. Set the other items If necessary, click Color Adjustment tab, and adjust the color balance (Cyan, Magenta, Yellow) and adjust Brightness, Intensity, and Contrast settings, and then click OK.
Page 187: Adjusting Color Balance
Adjusting Color Balance You can adjust the color tints when printing. Since this function adjusts color balance of the output by changing the ink ratios of each color, it changes the total color balance of the document. Use the application software when you want to change the color balance significantly.
Page 188 There are individual sliders for Cyan, Magenta, and Yellow. Each color becomes stronger when the corresponding slider is moved to the right, and becomes weaker when the corresponding slider is moved to the left. For example, when cyan becomes weaker, the color red becomes stronger. You can also directly enter a value linked to the slider.
Page 189: Adjusting Color Balance Using Sample Patterns (Printer Driver)
Adjusting Color Balance Using Sample Patterns (Printer Driver) You can look at the print results of pattern print and adjust the color balance. When you change the color balance or intensity/contrast of a document, the pattern print function prints the adjustment results in a list, together with the adjustment values.
Page 190 4. Setting pattern print When the Pattern Print dialog box opens, set the following items, and then click OK. Parameters to Adjust Select Cyan/Magenta/Yellow. Important • When the Grayscale Printing check box on the Main tab is checked, Cyan/Magenta/Yellow appear grayed out and are unavailable. Printer Paper Size Select the paper size to be used for pattern printing.
Page 191 Note • Large is about double the size of Medium, and Small is about half the size of Medium. 5. Checking the print results of pattern print On the Color Adjustment tab, select OK to close the Manual Color Adjustment dialog box. On the Main tab, select OK, and then execute printing.
Page 192 Note • You can also set color balance on the Quick Setup tab by choosing Photo Printing under Commonly Used Settings, and then choosing Color/Intensity Manual Adjustment under Additional Features. 7. Complete the setup Click OK on the Main tab. Then when you execute printing, the document is printed with the color balance that was adjusted by the pattern print function.
Page 193: Adjusting Brightness
Adjusting Brightness You can change the brightness of the overall image data during printing. This function does not change pure white or pure black but it changes the brightness of the intermediate colors. The following sample shows the print result when the brightness setting is changed. Light is selected Normal is selected Dark is selected...
Page 194 4. Complete the setup Click OK on the Main tab. When you execute print, the data is printed at the specified brightness. Related Topics Setting the Print Quality Level (Custom) Specifying Color Correction Adjusting Color Balance Adjusting Intensity Adjusting Contrast...
Page 195: Adjusting Intensity
Adjusting Intensity You can dilute (brighten) or intensify (darken) the colors of the overall image data during printing. The following sample shows the case when the intensity is increased so that all colors become more intense when the image data is printed. No adjustment Higher intensity The procedure for adjusting intensity is as follows:...
Page 196 Important • Adjust the slider gradually. 4. Complete the setup Click OK on the Main tab. When you execute print, the image data is printed with the adjusted intensity. Related Topics Setting the Print Quality Level (Custom) Specifying Color Correction Adjusting Color Balance Adjusting Color Balance Using Sample Patterns (Printer Driver) Adjusting Brightness...
Page 197: Adjusting Contrast
Adjusting Contrast You can adjust the image contrast during printing. To make the differences between the light and dark portions of images greater and more distinct, increase the contrast. On the other hand, to make the differences between the light and dark portions of images smaller and less distinct, reduce the contrast.
Page 198 After adjusting each color, click OK. Important • Adjust the slider gradually. 4. Complete the setup Click OK on the Main tab. When you execute print, the image is printed with the adjusted contrast. Related Topics Setting the Print Quality Level (Custom) Specifying Color Correction Adjusting Color Balance Adjusting Color Balance Using Sample Patterns (Printer Driver)
Page 199: Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver)
Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver) You can look at the print results of pattern print and adjust the intensity/contrast. When you change the color balance or intensity/contrast of a document, the pattern print function prints the adjustment results in a list, together with the adjustment values. Described below is the procedure for adjusting the intensity/contrast while looking at the pattern.
Page 200 4. Setting pattern print When the Pattern Print dialog box opens, set the following items, and then click OK. Parameters to Adjust Select Intensity/Contrast. Printer Paper Size Select the paper size to be used for pattern printing. Note • Depending on the paper size selected on the Page Setup tab, there may be sizes that cannot be selected.
Page 201 On the Color Adjustment tab, select OK to close the Manual Color Adjustment dialog box. On the Main tab, select OK, and then execute printing. The machine then prints a pattern in which the intensity/contrast that you set is the center value. 6.
Page 202 Note • You can also set intensity/contrast on the Quick Setup tab by choosing Photo Printing under Commonly Used Settings, and then choosing Color/Intensity Manual Adjustment under Additional Features. 7. Complete the setup Click OK on the Main tab. Then when you execute printing, the document is printed with the intensity/contrast that was adjusted by the pattern print function.
Page 203: Overview Of The Printer Driver
Overview of the Printer Driver Canon IJ Printer Driver How to Open the Printer Driver Setup Window Canon IJ Status Monitor Checking the Ink Status from Your Computer Canon IJ Preview Deleting the Undesired Print Job Instructions for Use (Printer Driver)
Page 204: Canon Ij Printer Driver
Canon IJ Printer Driver The Canon IJ printer driver (called printer driver below) is a software that is installed on your computer for printing data with this machine. The printer driver converts the print data created by your application software into data that your printer can understand, and sends the converted data to the printer.
Page 205: How To Open The Printer Driver Setup Window
How to Open the Printer Driver Setup Window You can display the printer driver setup window from the application software in use or from the printer icon. Open the Printer Driver Setup Window through the Application Software Follow the procedure below to configure printing profile when printing. 1.
Page 206: Canon Ij Status Monitor
When Errors Occur The Canon IJ Status Monitor is automatically displayed if an error occurs (e.g., if the printer runs out of paper or if the ink is low). In such cases, take the appropriate action as described.
Page 207: Checking The Ink Status From Your Computer
Ink Details dialog box. In such cases, take the appropriate action as described on the screen. Note • You can also display the Ink Details dialog box by selecting the ink icon on the Canon IJ Status Monitor.
Page 208: Canon Ij Preview
Canon IJ Preview The Canon IJ Preview is an application software that displays what the print result will look like before a document is actually printed. The preview reflects the information that is set within the printer driver and allows you to check the document layout, print order, and number of pages.
Page 209: Deleting The Undesired Print Job
Deleting the Undesired Print Job If you are using the XPS printer driver, replace "Canon IJ Status Monitor" with "Canon IJ XPS Status Monitor" when reading this information. If the printer does not start printing, canceled or failed print job data may be remaining.
Page 210: Instructions For Use (Printer Driver)
Instructions for Use (Printer Driver) This printer driver is subject to the following restrictions. Keep the following points in mind when using the printer driver. Restrictions on the Printer Driver • With some applications, the Copies setting in the Page Setup tab of the printer driver may not be enabled.
Page 211 2. Open the printer driver setup window, and on the Page Setup tab, set Page Size to the same paper size that you specified in Word. 3. Set the Page Layout that you want, and then click OK to close the window. 4.
Page 212: Printer Driver Description
Printer Driver Description Quick Setup tab Description Main tab Description Page Setup tab Description Maintenance tab Description Canon IJ Preview Description Canon IJ XPS Preview Description Canon IJ Status Monitor Description...
Page 213: Quick Setup Tab Description
Quick Setup tab Description The Quick Setup tab is for registering commonly used print settings. When you select a registered setting, the machine automatically switches to the preset items. Commonly Used Settings The names and icons of frequently used printing profiles are registered. When you select a printing profile according to the purpose of the document, settings that match the purpose are applied.
Page 214 Check this check box to display a preview before printing. Uncheck this check box if you do not want to display a preview. Important • To use the Canon IJ XPS Preview, you must have Microsoft .NET Framework 4 Client Profile installed on your computer. Additional Features Displays the frequently used, convenient functions for the printing profile that you selected for Commonly Used Settings on the Quick Setup tab.
Page 215 4-on-1 Printing Prints four pages of the document, side by side, on one sheet of paper. To change the page sequence, click the Page Setup tab, select Page Layout for Page Layout, and click Specify..Then in the Page Layout Printing dialog box that appears, specify the Page Order.
Page 216 Print Quality Selects your desired printing quality. Select one of the following to set the print quality level that is appropriate for the purpose. To set the print quality level individually, click the Main tab, and for Print Quality, select Custom. The Set...
Page 217 Options... Opens the Save Commonly Used Settings dialog box. Changes the details of printing profile to be saved. Save Commonly Used Settings dialog box Select the icons of the printing profiles to be registered to Commonly Used Settings, and change the items to be saved in the printing profiles.
Page 218 Setting Paper Dimensions (Custom Size) Printing a Color Document in Monochrome Specifying Color Correction Adjusting Color Balance Adjusting Color Balance Using Sample Patterns (Printer Driver) Adjusting Brightness Adjusting Intensity Adjusting Contrast Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver) Registering a Frequently Used Printing Profile...
Page 219: Main Tab Description
Main tab Description The Main tab allows you to create a basic print setup in accordance with the media type. Unless special printing is required, normal printing can be performed just by setting the items on this tab. Settings Preview The paper illustration shows how the original will be laid out on a sheet of paper.
Page 220 Shows what the print result will look like before you actually print the data. Check this check box to display a preview before printing. Important • To use the Canon IJ XPS Preview, you must have Microsoft .NET Framework 4 Client Profile installed on your computer. Defaults Restores all the settings you have changed to their default values.
Page 221 Note • The High, Standard, or Draft print quality modes are linked with the slider bar. Therefore when the slider bar is moved, the corresponding quality and value are displayed on the left. This is the same as when the corresponding radio button is selected for Print Quality on the Main tab. Color Adjustment Tab This tab allows you to adjust the color balance by changing the settings of the Cyan, Magenta, Yellow, Brightness, Intensity, and Contrast options.
Page 222 Contrast Adjusts the contrast between light and dark in the image to be printed. Moving the slider to the right increases the contrast, moving the slider to the left decreases the contrast. You can also directly enter a value linked to the slider. Enter a value in the range from -50 to 50. Print a pattern for color adjustment When the color balance or intensity/contrast is changed, the pattern printing function prints a list of the adjustment results along with the adjustment values.
Page 223 • In the XPS printer driver, ICM has become ICC Profile Matching. Driver Matching With Canon Digital Photo Color, you can print sRGB data with color tints that most people prefer. ICM (ICC Profile Matching) Adjusts the colors by using an ICC profile when printing.
Page 224 Important • Adobe RGB (1998) is not displayed when input profiles of Adobe RGB are not installed. Related Topics Setting the Print Quality Level (Custom) Adjusting Color Balance Adjusting Brightness Adjusting Intensity Adjusting Contrast Adjusting Color Balance Using Sample Patterns (Printer Driver) Adjusting Intensity/Contrast Using Sample Patterns (Printer Driver) Specifying Color Correction Adjusting Colors with the Printer Driver...
Page 225: Page Setup Tab Description
Page Setup tab Description The Page Setup tab allows you to determine how a document is to be arranged on the paper. Also, this tab allows you to set the number of copies and the order of printing. If the application which created the document has a similar function, set them with the application.
Page 226 Printer Paper Size Selects the size of paper actually loaded into the machine. The default setting is Same as Page Size to perform normal-sized printing. You can select a printer paper size when you select Fit-to-Page, Scaled, Page Layout, Tiling/Poster, or Booklet for Page Layout.
Page 227 Stapling Side Selects the stapling margin position. The printer analyzes the Orientation and Page Layout settings, and automatically selects the best stapling margin position. Check Stapling Side, and select from the list to change it. Specify Margin... Opens the Specify Margin dialog box.
Page 228 Units Select the unit for entering a user-defined paper size. Paper Size Specifies the Width and the Height of the custom paper. Measurement is shown according to the units specified in Units. Page Layout Printing dialog box This dialog box allows you to select the number of document pages to be placed on one sheet of paper, the page order, and whether a page border line is to be printed around each document page.
Page 229 Print "Cut/Paste" lines in margins Specifies whether to print cut lines that serve as guidelines for pasting together the pages into a poster. Check this check box to print the cut lines. Print page range Specifies the printing range. Select All under normal circumstances. Select Pages to specify a specific page or range.
Page 230 Disable ICM required from the application software Disables the ICM function required from the application software. When an application software uses Windows ICM to print data, unexpected colors may be produced or the printing speed may decrease. If these problems occur, checking this check box may resolve the problems.
Page 231 Scale images using nearest-neighbor interpolation When an image is to be enlarged or reduced when printed, the printer uses a simple interpolation process to enlarge or reduce the image. If the image data in a printed document is not printed clearly, selecting this check box may improve the results.
Page 232 Place stamp over text Sets how the stamp is to be printed over the document. Check the Stamp check box to enable this. Check this check box to print a stamp over the printed document page. The printed data may be hidden behind the stamp.
Page 233 Stamp Type Specifies the stamp type. Select Text to create a stamp with characters. Select Bitmap to create with a bitmap file. Select Date/Time/User Name to display the creation date/time and user name of the printed document. The setting items in the Stamp tab change depending on the selected type. When Stamp Type is Text or Date/Time/User Name Stamp Text Specifies the stamp text string.
Page 234 Placement Tab The Placement tab allows you to set the position where the stamp is to be printed. Preview Window Shows the status of the stamp configured in each tab. Position Specifies the stamp position on the page. Selecting Custom from the list allows you to enter values for the X-Position and Y-Position coordinates directly.
Page 235 File Specifies the name of the bitmap file to be used as the background. Select File... Opens the dialog box to open a file. Click this button to select a bitmap file (.bmp) to be used as the background. Layout Method Specifies how the background image is to be placed on the paper.
Page 236: Maintenance Tab Description
Maintenance tab Description The Maintenance tab allows you to perform machine maintenance or change the settings of the machine. Cleaning Performs print head cleaning. Print head cleaning removes any blockage in the print head nozzles. Perform cleaning when printing becomes faint, or a specific color fails to print, even though all ink levels are sufficiently high.
Page 237 Align the print head immediately after installing the print head. When you click Print Head Alignment, the Start Print Head Alignment dialog box is displayed. Nozzle Check Prints a nozzle check pattern. Perform this function if printing becomes faint or a specific color fails to print. Print a nozzle check pattern, and check whether the print head is working properly.
Page 238 If this happens, click OK to display the most recent settings specified on your computer. View Print History This function starts the Canon IJ XPS preview, and displays the print history. Note • You can use this function only with the XPS printer driver.
Page 239 Note • If you are using the XPS printer driver, the "Canon IJ Status Monitor" becomes the "Canon IJ XPS Status Monitor". About Opens the About dialog box. The version of the printer driver, plus a copyright notice, can be checked.
Page 240 Initial Check Items Check that the machine power is on, and open the cover of the machine. Check the following items for each ink. Then, if necessary, perform Nozzle Check or Cleaning. • Check the amount of ink remaining in the cartridge. •...
Page 241 Quiet Settings dialog box When you click Quiet Settings, the Quiet Settings dialog box is displayed. Quiet Settings dialog box allows you to specify a setting that reduces the operating noise of the machine. Select when you wish to reduce the operating noise of the machine at night, etc. Using this function may lower the print speed.
Page 242 Modules Lists the printer driver modules. Language Specifies the language you wish to use in the printer driver setup window. Important • If the font for displaying the language of your choice is not installed in your system, the characters will be garbled. Related Topics Cleaning the Print Heads from Your Computer Aligning the Print Head Position from Your Computer...
Page 243: Canon Ij Preview Description
Canon IJ Preview Description Canon IJ Preview is an application software that displays what the print result will look like before a document is actually printed. The preview reflects the information that is set within the printer driver and allows you to check the document layout, print order, and number of pages.
Page 244 This screen also allows you to change the media type and paper source settings. Help Menu When you select this menu item, the Help window for Canon IJ Preview is displayed, and you can check the version and copyright information.
Page 245 Start Printing button Prints the documents selected in the document list. The printed documents are deleted from the list, and when all documents are printed, the Canon IJ XPS Preview closes. Cancel Printing button Ends the Canon IJ Preview, and cancels the printing of the document that is displayed on the preview screen.
Page 246: Canon Ij Xps Preview Description
Canon IJ XPS Preview Description Canon IJ XPS Preview is an application software that displays what the print result will look like before a document is actually printed. The preview reflects the information which is set within the printer driver and allows you to check the document layout, print order, and number of pages.
Page 247 Adds the document saved in the print history to the document list. Exit Ends the Canon IJ XPS Preview. The documents remaining in the document list will be deleted from the list. This command has the same function as the Exit in the print settings area.
Page 248 Delete Document Deletes the selected document from the document list. If the document list contains only one document, the document is grayed out and cannot be selected. This command has the same function as the (Delete Document) on the toolbar. Grayscale Printing Allows you to change the monochrome print settings.
Page 249 Move to Last Moves the currently selected page to the end of the document. If the currently selected page is the last page, this command is grayed out and cannot be selected. View Menu Selects the documents and pages to be displayed. Documents Use the following command to select the document to display.
Page 250 Select Page Information, Layout, or Manual Color Adjustment. Help Menu When you select this menu item, the Help window for Canon IJ XPS Preview is displayed, and you can check the version and copyright information. (Print) Prints the documents selected in the document list.
Page 251 If the document list contains only one document, the document is grayed out and cannot be selected. (Reset Documents) Returns the document selected in the document list to their status before they were added to the Canon IJ XPS Preview.
Page 252 Pages Displays the number of pages in the print document. Important • The number displayed in Pages and the output page count are different. • To check the output page count, check the status bar at the bottom of the preview window. Status Displays the status of the print documents.
Page 253 The documents remaining in the document list will be deleted from the list. Print Prints the documents selected in the document list. The printed documents are deleted from the list, and when all documents are printed, the Canon IJ XPS Preview closes.
Page 254: Canon Ij Status Monitor Description
Canon IJ Status Monitor Description The Canon IJ Status Monitor displays the status of the machine and the printing progress. The monitor uses graphics, icons, and messages to let you know the machine status. Canon IJ Status Monitor Features The Canon IJ Status Monitor offers the following advantages: You can check the status of the machine on the screen.
Page 255 Closes the Ink Details dialog box to return to Canon IJ Status Monitor. Help Menu When you select this menu item, the Help window for Canon IJ Status Monitor is displayed, and you can check the version and copyright information.
Page 256: Updating The Mp Drivers
Updating the MP Drivers Obtaining the Latest MP Drivers Deleting the Unnecessary MP Drivers Before Installing the MP Drivers Installing the MP Drivers...
Page 257: Obtaining The Latest Mp Drivers
Obtaining the Latest MP Drivers The MP Drivers include a printer driver and ScanGear (scanner driver). By updating the MP Drivers to the latest version of the MP Drivers, unresolved problems may be solved. You can access our website and download the latest MP Drivers for your model. Important •...
Page 258: Deleting The Unnecessary Mp Drivers
Deleting the Unnecessary MP Drivers The MP Drivers which you no longer use can be deleted. When deleting the MP Drivers, first exit all programs that are running. The procedure to delete the unnecessary MP Drivers is as follows: 1. Start the uninstaller •...
Page 259: Before Installing The Mp Drivers
Before Installing the MP Drivers This section describes the items that you should check before installing the MP Drivers. You should also refer to this section if the MP Drivers cannot be installed. Checking the Machine Status • Confirm that the USB port of this machine and the computer are firmly connected with the USB cable. •...
Page 260: Installing The Mp Drivers
Installing the MP Drivers You can access our web site through the Internet and download the latest MP Drivers and XPS printer driver for your model. The procedure for installing the downloaded MP Drivers is as follows: 1. Turn off the machine 2.
Page 261: Sharing The Printer On A Network
• In case an error occurred when a document is printed by the client system to a shared printer, the error message of Canon IJ Status Monitor will be displayed both on the client system and the print server system. For regular printing, Canon IJ Status Monitor will be displayed only on the client system.
Page 262: Settings On Print Server
Settings on Print Server When you use the printer on a network, set up the printer driver for sharing on the print server system. The procedure for setting up the print server systems is as follows: Install the MP Drivers on the print server system 2.
Page 263: Settings On Client Pc
Settings on Client PC After setting up the print server system, set up the client system. The procedure for setting up the client systems is as follows: If you are using Windows 8, Windows 7, or Windows Vista Install the MP Drivers on the client systems Note •...
Page 264 Note • You must manually select the connection destination on the client computer. During installation, click Cancel in the Connect Cable window. When the confirmation message appears, click Yes. In the Installation Incomplete window, select the Select printer port check box, click Manual Selection, and then select the appropriate port.
Page 265: Restrictions On Printer Sharing
Restrictions on Printer Sharing If you are using the XPS printer driver, replace "Canon IJ Preview" with "Canon IJ XPS Preview" when reading this information. These are restrictions that apply when you are using a printer in a network environment. Check the restrictions for the environment you are using.
Page 266 When the Same Printer Driver is Installed in the Print Server System and the Client System as the Local Printer • The net crawl function may automatically create a network printer icon on the client system.
Page 267: Copying
Copying Making Copies Basic Switching the Page Size between A4 and Letter...
Page 268: Making Copies
Making Copies Load the original on the platen glass to copy. Make sure that the machine is turned on. Load A4 or Letter-sized plain paper. Load the original on the platen glass. Note • You can switch the size of paper loaded in the rear tray between A4 and Letter. Switching the Page Size between A4 and Letter 4.
Page 269 Note • To cancel copying, press the Stop button. • To set the print quality to "Draft" (speed priority) You can set the print quality to "Draft" (speed priority) following the procedure below. 1. Press and hold down the Color or Black button for 2 or more seconds in step 4. The ON lamp flashes once.
Page 270: Switching The Page Size Between A4 And Letter
Switching the Page Size between A4 and Letter You can switch the size of paper loaded on the rear tray between A4 and Letter. This setting is useful if you usually load Letter-sized paper in the rear tray. Make sure that the machine is turned on. 2.
Page 271: Scanning
Scanning Scanning from a Computer Scanning with IJ Scan Utility Scanning with Application Software that You are Using (ScanGear) Useful Information on Scanning Other Scanning Methods Placing Items (When Scanning from a Computer)
Page 272: Scanning From A Computer
Scanning from a Computer Scanning with IJ Scan Utility Scanning with Application Software that You are Using (ScanGear) Useful Information on Scanning Other Scanning Methods Placing Items (When Scanning from a Computer)
Page 273: Scanning With Ij Scan Utility
Scanning with IJ Scan Utility What Is IJ Scan Utility (Scanner Software)? Starting IJ Scan Utility Easy Scanning with Auto Scan Basic Scanning Photos Scanning Documents Scanning with Favorite Settings Scanning Items Larger than the Platen (Image Stitch) Scanning Multiple Items at One Time Saving after Checking Scan Results Sending Scanned Images via E-mail Extracting Text from Scanned Images (OCR)
Page 274: What Is Ij Scan Utility (Scanner Software)
What Is IJ Scan Utility (Scanner Software)? IJ Scan Utility is an application that allows you to easily scan photos, documents, etc. You can complete from scanning to saving at one time by simply clicking the corresponding icon in the IJ Scan Utility main screen. What You Can Do with IJ Scan Utility Scan Easily according to Purposes You can scan by simply clicking an icon such as Auto to scan easily, Photo to scan with...
Page 275 Important Some functions are available only when My Image Garden is installed. Note Refer to "Settings Dialog Box" for how to set the applications to integrate with.
Page 276: Starting Ij Scan Utility
If IJ Scan Utility is not displayed on the Start screen, select the Search charm, then search for "IJ Scan Utility". Windows 7/Windows Vista/Windows XP: From the Start menu, select All Programs > Canon Utilities > IJ Scan Utility > IJ Scan Utility to start IJ Scan Utility.
Page 277: Easy Scanning With Auto Scan
Easy Scanning with Auto Scan You can scan easily by automatically detecting the item type. Important The following types of items may not be scanned correctly. In that case, adjust the cropping frames (scan areas) in whole image view of ScanGear (scanner driver) and scan again.
Page 278 Scanning with Favorite Settings...
Page 279: Scanning Photos
Scanning Photos You can scan photos placed on the platen with settings suitable for photos. Place the photo on the platen. Placing Items (When Scanning from a Computer) Start IJ Scan Utility. Click Settings..., select the Settings (Photo Scan) dialog box, then set the paper size, resolution, etc.
Page 280: Scanning Documents
Scanning Documents You can scan items placed on the platen with settings suitable for documents. Place the item on the platen. Placing Items (When Scanning from a Computer) Start IJ Scan Utility. Click Settings..., select the Settings (Document Scan) dialog box, then set the paper size, resolution, etc.
Page 281: Scanning With Favorite Settings
Scanning with Favorite Settings You can scan items placed on the platen with your favorite settings saved beforehand. This is convenient for saving frequently used settings or when specifying scan settings in detail. Start IJ Scan Utility. Click Settings..., select the Settings (Custom Scan) dialog box, then set the select source, resolution, etc.
Page 282: Scanning Items Larger Than The Platen (Image Stitch)
Scanning Items Larger than the Platen (Image Stitch) You can scan the left and right halves of an item larger than the platen and combine them back into one image. Items up to approximately twice as large as the platen are supported. Note The following explains how to scan from the item to be placed on the left side.
Page 283 Make sure that Scan from Left is selected in Scan Direction. Place the item that is to be displayed on the left side of the screen face- down on the platen. Click Start Scanning Image 1.
Page 284 The first item is scanned and appears in 1. Note Click Cancel to cancel the scan. Place the item that is to be displayed on the right side of the screen face- down on the platen. Click Start Scanning Image 2.
Page 285 The second item is scanned and appears in 2. Note Click Cancel to cancel the scan. Adjust the scanned images as required. Use the Toolbar to rotate or zoom in/out, or drag the images to adjust their positions. Note Select the Adjust cropping frames checkbox to specify the area to be saved. Adjusting Cropping Frames in the Image Stitch Window To scan an item again, select the image in the Preview area or the thumbnail at the top of the screen, then click...
Page 286 The combined image is saved. Note Refer to "Image Stitch Window" for details on the Image Stitch window. You can make advanced scan settings in the Settings (Scan and Stitch) dialog box displayed by clicking Settings..
Page 287: Scanning Multiple Items At One Time
Scanning Multiple Items at One Time You can scan two or more photos (small items) placed on the platen at one time and save each image individually. Important The following types of items may not be scanned correctly. In that case, adjust the cropping frames (scan areas) in whole image view of ScanGear (scanner driver) and scan again.
Page 288 The Settings dialog box appears. Click Custom Scan. Select Select Source according to the items to be scanned.
Page 289 Select Auto scan for Paper Size, then click OK. The IJ Scan Utility main screen appears. Note Refer to the following pages for details on the setting items in the Settings dialog box. Settings (Photo Scan) Dialog Box Settings (Document Scan) Dialog Box Settings (Custom Scan) Dialog Box...
Page 290 Click Custom. Multiple items are scanned at one time. Note Click Cancel to cancel the scan. Scanned images are saved in the folder set for Save in in the corresponding Settings dialog box displayed by clicking Settings..In each Settings dialog box, you can also make advanced scan settings.
Page 291: Saving After Checking Scan Results
Saving after Checking Scan Results You can check the scan results, then save the images to a computer. Important You cannot check the scan results before saving when scanned using Auto scan. Note The screens for scanning photos are used as examples in the following descriptions. Start IJ Scan Utility.
Page 292 The IJ Scan Utility main screen appears. Note Refer to the following pages for details on the setting items in the Settings dialog box. Settings (Photo Scan) Dialog Box Settings (Document Scan) Dialog Box Settings (Custom Scan) Dialog Box Settings (Scan and Stitch) Dialog Box Settings (ScanGear) Dialog Box Click Photo.
Page 293 Change the image order or file save options as required. You can change the image order or file save options in the Save Settings dialog box. Note The default save folders are as follows. Windows 8: My Documents folder Windows 7: My Documents folder Windows Vista: Documents folder Windows XP: My Documents folder Click OK.
Page 294: Sending Scanned Images Via E-Mail
Sending Scanned Images via E-mail You can send scanned images via e-mail. Note The screens for scanning photos are used as examples in the following descriptions. Start IJ Scan Utility. Click Settings..Settings dialog box appears. Click Photo Scan. Select Attach to e-mail in Application Settings, then select an e-mail client.
Page 295 Note You can add e-mail clients to use for attachments from the pull-down menu. If None (Attach Manually) is selected, manually attach scanned and saved images to e-mail. Click OK. The IJ Scan Utility main screen appears.
Page 296 Note Refer to the following pages for details on the setting items in the Settings dialog box. Settings (Auto Scan) Dialog Box Settings (Photo Scan) Dialog Box Settings (Document Scan) Dialog Box Settings (Custom Scan) Dialog Box Settings (ScanGear) Dialog Box Click Photo.
Page 297: Extracting Text From Scanned Images (Ocr)
Extracting Text from Scanned Images (OCR) Scan text in scanned magazines and newspapers and display it in Notepad (included with Windows). Note You can extract text when scanning via Document, Custom, or ScanGear. The screens for scanning documents are used as examples in the following descriptions.
Page 298 Note For Resolution, only 300 dpi or 400 dpi can be set when Start OCR is selected in Application Settings. Select Start OCR for Application Settings, then select the application in which you want to display the result. Note When My Image Garden is specified, after the image is scanned, the text in the image is extracted and appears in Notepad (included with Windows).
Page 299 The IJ Scan Utility main screen appears. Note Refer to the following pages for details on the setting items in the Settings dialog box. Settings (Document Scan) Dialog Box Settings (Custom Scan) Dialog Box Settings (ScanGear) Dialog Box Click Document. Scanning starts.
Page 300 Documents containing text with font size outside the range of 8 points to 40 points (at 300 dpi) Slanted documents Documents placed upside down or documents with text in the wrong orientation (rotated characters) Documents containing special fonts, effects, italics, or hand-written text Documents with narrow line spacing Documents with colors in the background of text Documents containing multiple languages...
Page 301: Ij Scan Utility Screens
IJ Scan Utility Screens IJ Scan Utility Main Screen Settings Dialog Box Settings (Auto Scan) Dialog Box Settings (Photo Scan) Dialog Box Settings (Document Scan) Dialog Box Settings (Custom Scan) Dialog Box Settings (Scan and Stitch) Dialog Box Settings (ScanGear) Dialog Box Settings (General Settings) Dialog Box Data Format Settings Dialog Box Save Settings Dialog Box...
Page 302: Ij Scan Utility Main Screen
"IJ Scan Utility". Windows 7/Windows Vista/Windows XP: From the Start menu, select All Programs > Canon Utilities > IJ Scan Utility > IJ Scan Utility to start IJ Scan Utility. You can complete from scanning to saving at one time by simply clicking the corresponding icon.
Page 303 Scans items with your favorite settings and saves the images to a computer. The item type can be automatically detected. Scan/save settings and the response after scanning can be specified in the Settings (Custom Scan) dialog box. • Stitch Displays the Image Stitch window in which you can scan the left and right halves of an item larger than the platen and combine the scanned images back into one image.
Page 304: Settings Dialog Box
Settings Dialog Box There are two tabs in the Settings dialog box: (Scanning from a Computer) and (General Settings). When you click a tab, the view in the red frame switches and you can make advanced settings to functions on each tab. (Scanning from a Computer) Tab You can specify how to respond when scanning from IJ Scan Utility or My Image Garden.
Page 305 Settings (Auto Scan) Dialog Box Click Auto Scan on the (Scanning from a Computer) tab to display the Settings (Auto Scan) dialog box. In the Settings (Auto Scan) dialog box, you can make advanced scan settings to scan by automatically detecting the item type. (1) Scan Options Area (2) Save Settings Area (3) Application Settings Area...
Page 306 Text documents smaller than 2L (5 inches x 7 inches) (127 mm x 178 mm), such as paperback pages with the spine cut off Items printed on thin white paper Long narrow items such as panoramic photos Reflective disc labels may not be scanned as expected. Place items to be scanned on the platen correctly.
Page 307 Note You can change the data format from Settings..• Settings... Click to display the Data Format Settings dialog box in which you can set the quality of the images to be saved, keyword search of PDF files and their compression type, and the data format in which to save images scanned with Auto Scan.
Page 308 Saves to the folder specified in Save in. Note Specify the application or folder in the Select Application or Select Destination Folder dialog box displayed by selecting Add... from the pull-down menu. • Instructions Opens this guide. • Defaults You can restore the settings in the displayed screen to the default settings.
Page 309 Settings (Photo Scan) Dialog Box Click Photo Scan on the (Scanning from a Computer) tab to display the Settings (Photo Scan) dialog box. In the Settings (Photo Scan) dialog box, you can make advanced scan settings to scan items as photos. (1) Scan Options Area (2) Save Settings Area (3) Application Settings Area...
Page 310 Select the size of the item to be scanned. When you select Custom, a screen in which you can specify the paper size appears. Select a Unit, then enter the Width and Height, and then click OK. Note Click Defaults to restore the specified settings to the default settings. •...
Page 311 Click to display the Data Format Settings dialog box in which you can set the quality of the images to be saved, keyword search of PDF files and their compression type, and the data format in which to save images scanned with Auto Scan. •...
Page 312 You can specify the e-mail client you want to start from the pull-down menu. • Do not start any application Saves to the folder specified in Save in. Note Specify the application or folder in the Select Application or Select Destination Folder dialog box displayed by selecting Add...
Page 313 Settings (Document Scan) Dialog Box Click Document Scan on the (Scanning from a Computer) tab to display the Settings (Document Scan) dialog box. In the Settings (Document Scan) dialog box, you can make advanced scan settings to scan items as documents. (1) Scan Options Area (2) Save Settings Area (3) Application Settings Area...
Page 314 • Color Mode Select the color mode in which to scan the item. • Paper Size Select the size of the item to be scanned. When you select Custom, a screen in which you can specify the paper size appears. Select a Unit, then enter the Width and Height, and then click OK.
Page 315 Note Scanning takes longer than usual when you enable this function. • Sharpen outline Emphasizes the outline of the subjects to sharpen the image. • Reduce show-through Sharpens text in an item or reduces show-through in newspapers, etc. • Reduce moire Reduces moire patterns.
Page 316 Note Scanning takes longer than usual when you enable Correct slanted text document. • Detect the orientation of text document and rotate image Automatically rotates the image to the correct orientation by detecting the orientation of text in the scanned document. Important Only text documents written in languages that can be selected from Document Language in the...
Page 317 Displays the folder in which to save the scanned images. To change the folder, specify the destination folder in the Select Destination Folder dialog box displayed by selecting Add... from the pull-down menu. The default save folders are as follows. Windows 8: My Documents folder Windows 7: My Documents folder Windows Vista: Documents folder...
Page 318 You can specify the application from the pull-down menu. • Do not start any application Saves to the folder specified in Save in. Note Specify the application or folder in the Select Application or Select Destination Folder dialog box displayed by selecting Add... from the pull-down menu. •...
Page 319 Settings (Custom Scan) Dialog Box Click Custom Scan on the (Scanning from a Computer) tab to display the Settings (Custom Scan) dialog box. In the Settings (Custom Scan) dialog box, you can make advanced scan settings to scan according to your preference. (1) Scan Options Area (2) Save Settings Area (3) Application Settings Area...
Page 320 Important Item types supported by Auto are photos, postcards, business cards, magazines, newspapers, documents, and BD/DVD/CD. To scan the following types of items, specify the item type or size. You cannot scan correctly with Auto. A4 size photos Text documents smaller than 2L (5 inches x 7 inches) (127 mm x 178 mm), such as paperback pages with the spine cut off Items printed on thin white paper Long narrow items such as panoramic photos...
Page 321 • Resolution Select the resolution of the item to be scanned. The higher the resolution (value), the more detail in your image. Resolution Note Only Auto is available when Select Source is Auto. Only 300 dpi or 400 dpi can be set when Start OCR is selected in Application Settings.
Page 322 Important The color tone may differ from the source image due to corrections. In that case, deselect the checkbox and scan. Note Scanning takes longer than usual when you enable this function. • Sharpen outline Emphasizes the outline of the subjects to sharpen the image. •...
Page 323 Documents containing figures/images Hand-written text Documents containing both vertical and horizontal lines (tables) Note Scanning takes longer than usual when you enable Correct slanted text document. • Detect the orientation of text document and rotate image Automatically rotates the image to the correct orientation by detecting the orientation of text in the scanned document.
Page 324 Note Auto appears only when Auto is selected for Select Source. • Settings... Click to display the Data Format Settings dialog box in which you can set the quality of the images to be saved, keyword search of PDF files and their compression type, and the data format in which to save images scanned with Auto Scan.
Page 325 Select this when you also want to save the scanned images to a folder other than the one specified in Save in. You can specify the folder from the pull-down menu. • Attach to e-mail Select this when you want to send e-mails with the scanned images attached. You can specify the e-mail client you want to start from the pull-down menu.
Page 326 Settings (Scan and Stitch) Dialog Box Click Scan and Stitch on the (Scanning from a Computer) tab to display the Settings (Scan and Stitch) dialog box. In the Settings (Scan and Stitch) dialog box, you can make advanced scan settings for scanning items larger than the platen.
Page 327 Note To reduce moire, set Select Source to Magazine. • Color Mode Select the color mode in which to scan the item. • Resolution Select the resolution of the item to be scanned. The higher the resolution (value), the more detail in your image. Resolution •...
Page 328 • Data Format Select the data format in which to save the scanned images. You can select JPEG/Exif, TIFF, PNG, PDF, or PDF (Multiple Pages). Important You cannot select JPEG/Exif when Color Mode is Black and White. • Settings... Click to display the Data Format Settings dialog box in which you can set the quality of the images to be saved, keyword search of PDF files and their compression type, and...
Page 329 • Send to a folder Select this when you also want to save the scanned images to a folder other than the one specified in Save in. You can specify the folder from the pull-down menu. • Do not start any application Saves to the folder specified in Save in.
Page 330 Settings (ScanGear) Dialog Box Click ScanGear on the (Scanning from a Computer) tab to display the Settings (ScanGear) dialog box. In the Settings (ScanGear) dialog box, you can specify how to save images when scanning items by starting ScanGear (scanner driver) and how to respond after saving them.
Page 331 Note When PDF or PDF (Multiple Pages) is selected, images up to 9600 pixels x 9600 pixels can be scanned. When the Enable large image scans checkbox is selected in Save Settings, or when Start OCR is selected in Application Settings, you can select JPEG/Exif, TIFF, or PNG.
Page 332 Important When the Settings dialog box is displayed from My Image Garden, this option does not appear. (2) Application Settings Area • Open with an application Select this when you want to enhance or correct the scanned images. You can specify the application from the pull-down menu. •...
Page 333 Settings (General Settings) Dialog Box Click the (General Settings) tab to display the Settings (General Settings) dialog box. In the Settings (General Settings) dialog box, you can set the product to use, file size restriction on e-mail attachment, language to detect text in images, and folder in which to save images temporarily.
Page 334 • Instructions Opens this guide. • Defaults You can restore the settings in the displayed screen to the default settings.
Page 335: Data Format Settings Dialog Box
Data Format Settings Dialog Box Display the Data Format Settings dialog box by one of the following operations. • Click Settings... of Save Settings on each tab of the Settings dialog box • Click Settings... of Save Settings in the Save Settings dialog box that appears after scanning with the Check scan results checkbox selected in the Settings dialog box In the Data Format Settings dialog box, you can set the quality of the images to be saved, keyword search of PDF files and their compression type, and the data format in which to...
Page 336 Note When Black and White is set for Color Mode on the (Scanning from a Computer) tab of the Settings dialog box, PDF files will be saved in Standard even if High is set. • Format for Item Detected as Document in Auto Scan You can specify the data format for automatically saving items detected as documents in Auto Scan.
Page 337: Save Settings Dialog Box
Save Settings Dialog Box Select the Check scan results checkbox in Save Settings of the Settings dialog box to display the Save Settings dialog box after scanning. You can specify the data format and destination while viewing the thumbnails of scan results.
Page 338 (2) Scan Results Area Displays the thumbnails of the scanned images. You can change the save order of images via drag-and-drop. The file names for saving appear below the thumbnails. (3) Save Settings Area • File Name Enter the file name of the image to be saved. When you save a file, the date and four digits are appended to the set file name in the "_20XX0101_0001"...
Page 339: Image Stitch Window
Image Stitch Window Click Stitch in the IJ Scan Utility main screen to display the Image Stitch window. You can scan the left and right halves of an item larger than the platen and combine the images back into one image. You can scan items up to approximately twice as large as the platen.
Page 340 • Full Platen x 2 Scans the left and right halves of an item twice as large as the platen separately. • Scan Direction • Scan from Left Displays the first scanned image on the left side. • Scan from Right Displays the first scanned image on the right side.
Page 341 • Adjust cropping frames You can adjust the scan area in preview. If no area is specified, the image of the size selected in Select Output Size will be saved. If an area is specified, only the image in the cropping frame will be scanned and saved.
Page 342 • (Rotate Left) Rotates the preview image 90 degrees counter-clockwise. • (Invert Vertically) Rotates the preview image 180 degrees. • (Rotate Right) Rotates the preview image 90 degrees clockwise. • (Open Guide) Opens this page. (3) Thumbnail View Area • Thumbnail View Area Displays the thumbnails of the scanned images.
Page 343 The image is scanned in the direction specified in Scan Direction, and 2 appears next to it. • After scanning the second item by clicking Start Scanning Image 2 The two scanned images appear. Related Topic Scanning Items Larger than the Platen (Image Stitch)
Page 344: Scanning With Application Software That You Are Using (Scangear)
Scanning with Application Software that You are Using (ScanGear) What Is ScanGear (Scanner Driver)? Scanning with Advanced Settings Using ScanGear (Scanner Driver) Starting ScanGear (Scanner Driver) Scanning in Basic Mode Scanning in Advanced Mode Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) Correcting Images and Adjusting Colors with ScanGear (Scanner Driver)
Page 345: What Is Scangear (Scanner Driver)
What Is ScanGear (Scanner Driver)? ScanGear (scanner driver) is software required for scanning documents. It enables you to specify the output size and make image corrections when scanning. ScanGear can be started from My Image Garden or IJ Scan Utility. It can be also started from other applications that are compatible with a standard interface called TWAIN.
Page 346 Advanced Mode Use the Advanced Mode tab to specify the color mode, output resolution, image brightness, color tone, etc. when scanning.
Page 347: Scanning With Advanced Settings Using Scangear (Scanner Driver)
Scanning with Advanced Settings Using ScanGear (Scanner Driver) Starting ScanGear (Scanner Driver) Scanning in Basic Mode Scanning in Advanced Mode Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)
Page 348: Starting Scangear (Scanner Driver)
Starting ScanGear (Scanner Driver) Use ScanGear (scanner driver) to make image corrections and color adjustments when scanning. ScanGear can be started from My Image Garden or an application. Note • Set up the network environment if you have more than one scanner or have a network compatible model and changed the connection from USB connection to network connection.
Page 349: Scanning In Basic Mode
Scanning in Basic Mode Use the Basic Mode tab to scan easily by following the on-screen steps. Refer to "Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)" to scan multiple documents at one time from the Platen. When scanning from the ADF (Auto Document Feeder), documents are scanned without preview. Important •...
Page 350 Note • To scan magazines containing many color photos, select Magazine (Color). 3. Click Preview. Preview image appears in the Preview area. Important • Preview is not displayed when an ADF type is selected for Select Source. Note • Colors are adjusted based on the document type selected in Select Source. 4.
Page 351 Note • Click (Information) to open a dialog box in which you can check the current scan settings (document type, etc.). • A response of ScanGear after scanning can be specified in Status of ScanGear dialog after scanning on the Scan tab of the Preferences dialog box.
Page 352: Scanning In Advanced Mode
Scanning in Advanced Mode Use the Advanced Mode tab to specify the color mode, output resolution, image brightness, color tone, etc. when scanning. Refer to "Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)" to scan multiple documents at one time. Refer to "Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode"...
Page 353 3. Set Input Settings according to the document or purpose. 4. Click Preview. Preview images appear in the Preview area. 5. Set Output Settings. 6. Adjust the cropping frame (scan area), correct image, and adjust colors as required. Adjusting Cropping Frames (ScanGear) Image Settings Color Adjustment Buttons 7.
Page 354: Scanning Multiple Documents From The Adf (Auto Document Feeder) In Advanced Mode
Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode Use the Advanced Mode tab to specify the image brightness, color tone, etc. and scan multiple documents placed on the ADF (Auto Document Feeder) at one time. When scanning from the ADF, documents are scanned without preview. 1.
Page 355 Note • Click (Information) to open a dialog box in which you can check the current scan settings (document type, etc.). • A response of ScanGear after scanning can be specified in Status of ScanGear dialog after scanning on the Scan tab of the Preferences dialog box.
Page 356: Scanning Multiple Documents At One Time With Scangear (Scanner Driver)
Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) You can scan two or more photos (small documents) on the Platen at one time on the Basic Mode tab and Advanced Mode tab. This section explains how to scan multiple documents from the Basic Mode tab. Important •...
Page 357 3. Click Preview. Thumbnails of the preview images appear in the Preview area. Cropping frames are specified automatically according to the document size. 4. Set Destination. 5. Set Output Size according to purpose. 6. Adjust the cropping frames and set Image corrections as required. Note •...
Page 358 7. Select the images you want to scan. Select the checkboxes of the images you want to scan. 8. Click Scan. Scanning Multiple Documents in Whole Image View Follow these steps if thumbnails are not displayed correctly when previewed or if you want to scan multiple documents as a single image.
Page 359 Adjust the size and position of the cropping frames on the preview image. You can also create two or more cropping frames. If an area is not specified, the document will be scanned at the document size (Auto Crop). If an area is specified, only the portion in the specified area will be scanned.
Page 360: Correcting Images And Adjusting Colors With Scangear (Scanner Driver)
Correcting Images and Adjusting Colors with ScanGear (Scanner Driver) Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading Correction, etc.) Adjusting Colors Using a Color Pattern Adjusting Saturation and Color Balance Adjusting Brightness and Contrast Adjusting Histogram Adjusting Tone Curve Setting Threshold...
Page 361: Correcting Images (Unsharp Mask, Reduce Dust And Scratches, Fading Correction, Etc.)
Correcting Images (Unsharp Mask, Reduce Dust and Scratches, Fading Correction, etc.) The Image Settings functions on the Advanced Mode tab of ScanGear (scanner driver) allow you to enhance the outline of the subjects, reduce dust/scratches, and correct faded colors when scanning images. Setting Items Click (Arrow) of a function and select an item from the pull-down menu.
Page 362 Reducing show-through in text documents or lightening the base color in recycled paper, newspapers, etc. when scanning documents Set Reduce Show-through to ON. Sharpening slightly out-of-focus images Set Unsharp Mask to ON. Reducing gradations and stripe patterns Set Descreen to ON.
Page 363 Note • Printed photos and pictures are displayed as a collection of fine dots. "Moire" is a phenomenon where uneven gradation or a stripe pattern appears when such photos or pictures printed with fine dots are scanned. Descreen is the function for reducing this moire effect. Reducing dust and scratches Set Reduce Dust and Scratches to Low, Medium, or High according to the degree of dust and scratches.
Page 365: Adjusting Colors Using A Color Pattern
Adjusting Colors Using a Color Pattern You can preview color changes and reproduce natural colors by using the color pattern function in ScanGear (scanner driver)'s Basic Mode tab. Color Adjustment Correct colors that have faded with time or due to colorcast. "Colorcast" is a phenomenon where a specific color affects the entire picture due to the weather or ambient strong colors.
Page 366 Preview image appears in the center. Preview image colors change as you adjust them. Below is an example of correcting a bluish image. Since Blue and Green are too strong, click the Yellow and Magenta arrows to correct. Before After Note •...
Page 367: Adjusting Saturation And Color Balance
Adjusting Saturation and Color Balance You can brighten colors that have faded with time or due to colorcast by using (Saturation/Color Balance) in ScanGear (scanner driver)'s Advanced Mode tab. Note • Click Defaults to reset all adjustments in the current window. Saturation Adjust the image's saturation (vividness).
Page 368 Move (Slider) under Color Balance to the left or right to emphasize the corresponding color. Cyan & Red Magenta & Green Yellow & Blue These are complementary color pairs (each pair produces a shade of gray when mixed). You can reproduce the natural colors of the scene by reducing the cast color and increasing the complementary color.
Page 369: Adjusting Brightness And Contrast
Adjusting Brightness and Contrast You can adjust images that are too dark or bright, or too flat due to lack of contrast by using (Brightness/Contrast) in ScanGear (scanner driver)'s Advanced Mode tab. Note • Click (Down arrow) to switch to detailed view. Click (Up arrow) to return to the previous view.
Page 370 Brightness Adjust the image brightness. Move (Slider) under Brightness to the left to darken and right to brighten the image. You can also enter a value (-127 to 127). Darkened Original image Brightened Note • Highlights may be lost if you brighten the image too much, and shadows may be lost if you darken the image too much.
Page 371: Adjusting Histogram
Adjusting Histogram You can adjust the image color tone by using a graph (histogram) showing brightness distribution, via (Histogram) in ScanGear (scanner driver)'s Advanced Mode tab. Note • Click Defaults to reset all adjustments in the current window. Channel Each dot of an image is a mixture of Red, Green, and Blue in various proportions (gradation). These colors can be adjusted individually as a "channel."...
Page 372 (1) Bright area (2) Dark area (3) Whole image More data is distributed to the More data is distributed to the Data is widely distributed between the highlight side. shadow side. highlight and shadow. Adjusting Histograms (Using the Slider) Select a Channel, then move (Black-point Slider) or (White-point Slider) to specify the level to be set as the shadow or highlight.
Page 373 Moving the Mid-point Slider Move the Mid-point Slider to specify the level to be set as the middle of the tonal range. Images with more data distributed to the highlight side Move the Mid-point Slider toward the highlight side. Images with more data distributed to the shadow side Move the Mid-point Slider toward the shadow side.
Page 374 • The point clicked with (White-point Dropper) will be the brightest point. You can also enter a value (10 to 255). • Click (Dropper) for Gray Balance and click the area you want to adjust the color in the preview image.
Page 375: Adjusting Tone Curve
Adjusting Tone Curve You can adjust the brightness of an image by selecting the type of graph (tone curve) showing the balance of tone input and output, via (Tone Curve Settings) in ScanGear (scanner driver)'s Advanced Mode tab. Note • Click Defaults to reset all adjustments in the current window. Channel Each dot of an image is a mixture of Red, Green, and Blue in various proportions (gradation).
Page 376 Adjusting Tone Curve In Select Tone Curve, select a tone curve from No correction, Overexposure, Underexposure, High contrast, Reverse the negative/positive image, and Edit custom curve. No correction (No adjustment) Overexposure (Convex curve) The midtone data of the input side is stretched toward the highlight of the output side, resulting in a bright- toned image when viewed on a monitor.
Page 377 Edit custom curve You can drag specific points on the Tone Curve to freely adjust the brightness of the corresponding areas.
Page 378: Setting Threshold
Setting Threshold You can sharpen text in a document or reduce show-through in newspapers by adjusting the threshold level (Threshold) in ScanGear (scanner driver)'s Advanced Mode tab. Note • This function is available when Color Mode is Black and White. •...
Page 379: Scangear (Scanner Driver) Screens
ScanGear (Scanner Driver) Screens Basic Mode Tab Advanced Mode Tab Input Settings Output Settings Image Settings Color Adjustment Buttons Preferences Dialog Box Scanner Tab Preview Tab Scan Tab Color Settings Tab...
Page 380: Basic Mode Tab
Basic Mode Tab This mode allows you to scan easily by following the on-screen steps. This section describes the settings and functions available on the Basic Mode tab. (1) Settings and Operation Buttons (2) Toolbar (3) Preview Area Note • The displayed items vary by document type and view. •...
Page 381 Note • When you select a document type, the unsharp mask function will be active. • When you select an option other than the ADF types, the image adjustment function which adjusts images based on the document type will also be active. •...
Page 382 In thumbnail view: Drag the mouse over a thumbnail to display a cropping frame. When a cropping frame is displayed, the portion within the cropping frame will be scanned. When no cropping frame is displayed, each frame is scanned individually. In whole image view: When no cropping frame is displayed, the entire Preview area will be scanned.
Page 383 Note • For details on whether or how the cropping frame is initially displayed on a preview image, refer to Cropping Frame on Previewed Images in "Preview Tab" (Preferences dialog box). Invert aspect ratio Available when Output Size is set to anything but Flexible. Click this button to rotate the cropping frame.
Page 384 Perform Scan Scan Starts scanning. Note • When scanning starts, the progress will be displayed. Click Cancel to cancel the scan. Preferences... Opens the Preferences dialog box in which you can make scan/preview settings. Close Closes ScanGear (scanner driver). (2) Toolbar You can adjust or rotate preview images.
Page 385 (Uncheck All Frames) Available when two or more frames are displayed. Deselects the checkboxes of the image in thumbnail view. (Select All Frames) Available when two or more frames are displayed. Selects the images in thumbnail view and outlines them in blue. (Select All Cropping Frames) Available when two or more cropping frames are specified.
Page 386 • Selected Frame (thin blue outline): The settings will be applied to the Focus Frame and Selected Frames simultaneously. You can select multiple images by clicking them while pressing the Ctrl key. • Unselected (no outline): The settings will not be applied. •...
Page 387: Advanced Mode Tab
Advanced Mode Tab This mode allows you to make advanced scan settings such as the color mode, output resolution, image brightness, and color tone. This section describes the settings and functions available on the Advanced Mode tab. (1) Settings and Operation Buttons (2) Toolbar (3) Preview Area Note...
Page 388 Enter Setting Name and click Add; the name appears in Favorite Settings List. When you click Save, the item appears in the Favorite Settings list and can be selected, along with the predefined items. To delete an item, select it in Favorite Settings List and click Delete. Click Save to save the settings displayed in Favorite Settings List.
Page 389 Scan Starts scanning. Note • When scanning starts, the progress will be displayed. Click Cancel to cancel the scan. • When scanning is completed, a dialog box prompting you to select the next action may appear. Follow the prompt to complete. For details, refer to Status of ScanGear dialog after scanning "Scan Tab"...
Page 390 (3) Preview Area (Clear) Deletes the preview image from the Preview area. It also resets the Toolbar and color adjustment settings. (Crop) Allows you to specify the scan area by dragging the mouse. (Move Image) Allows you to drag the image until the part you want to see is displayed when an image enlarged in the Preview area does not fit in the screen.
Page 391 (Remove Cropping Frame) Removes the selected cropping frame. (Information) Displays the version of ScanGear and the current scan settings (document type, etc.). (Open Guide) Opens this page. (3) Preview Area This is where a trial image appears after you click Preview. You can also check the results of the settings (image corrections, color adjustments, etc.) made in "(1) Settings and Operation Buttons."...
Page 392 Note • You can specify the cropping frame on the displayed image. In thumbnail view, you can only create one cropping frame per image. In whole image view, you can create multiple cropping frames. Adjusting Cropping Frames (ScanGear) Related Topic Scanning in Advanced Mode Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode...
Page 393: Input Settings
Input Settings Input Settings allows you to set the following items: Select Source The type of document to be scanned is displayed. To scan from the Platen, select Platen; to scan from the ADF (Auto Document Feeder), select Document (ADF Simplex). Important •...
Page 394 Important • The Orientation dialog box can only be opened when Select Source is Document (ADF Simplex). Color Mode Select how to scan the document. Color Select this mode to scan color documents or to create color images. This mode renders the image in 256 levels (8 bit) of R(ed), G(reen), and B(lue).
Page 395: Output Settings
Output Settings Output Settings allows you to set the following items: Output Resolution Select the resolution to scan at. The higher the resolution (value), the more detail in your image. Select a resolution from the options displayed by clicking the button, or enter a value in 1 dpi increments.
Page 396 In whole image view: When no cropping frame is displayed, the entire Preview area will be scanned. When a cropping frame is displayed, the portion within the cropping frame will be scanned. Note • To enlarge/reduce the scanned image, enter values into (Width) and (Height) in Output Settings or specify a value (by 1 %) for %.
Page 397 Note • Refer to "Adjusting Cropping Frames (ScanGear)" for details on cropping frames. • For details on whether or how the cropping frame is initially displayed on a preview image, refer to Cropping Frame on Previewed Images in "Preview Tab" (Preferences dialog box). (Switch Aspect Ratio) Available when Output Size is set to anything but Flexible.
Page 398: Image Settings
Image Settings Important • Do not apply these functions to images without moire, dust/scratches, or faded colors. The color tone may be adversely affected. • Image correction results may not be reflected in the preview image. Note • Selectable settings depend on Color Mode settings. •...
Page 399 Important • You can set Image Adjustment after preview. • You can set this setting when Recommended is selected on the Color Settings tab of the Preferences dialog box. Note • If the image is not adjusted properly with Auto, specify the document type. •...
Page 400 Select this to reduce small dust particles and scratches. Large ones may remain. Medium It is recommended that you normally select this setting. High Select this to reduce large dust particles and scratches; however, evidence of the reduction process may remain or delicate parts of the image may be removed. Important •...
Page 401 Gutter Shadow Correction Use this function to correct shadows that appear between pages when scanning open booklets. When you set the Gutter Shadow Correction setting in the preview image, the result will be reflected. Preview the effects before scanning, as results vary depending on the type of document and how it is pressed.
Page 402 • If the shadow is not corrected properly, adjust the cropping frame (scan area) on the preview image. Adjusting Cropping Frames (ScanGear)
Page 403: Color Adjustment Buttons
Color Adjustment Buttons The Color Adjustment Buttons allow you to make fine corrections to the image brightness and color tones including adjustments to the image's overall brightness or contrast and adjustments to its highlight and shadow values (histogram) or balance (tone curve). Important •...
Page 404 (Histogram) A histogram allows you to see the data concentration at each brightness level of an image. You can specify the brightest level (highlight) and darkest level (shadow) within an image, cut the levels and expand the middle of the tonal range of the image. Adjusting Histogram (Tone Curve Settings) Adjust the brightness of an image by selecting the type of graph (tone curve) showing the balance of...
Page 405 Enter Setting Name and click Add; the name appears in Tone Curve Settings List or Threshold Settings List. Click Save to save. To delete an item, select it in Tone Curve Settings List or Threshold Settings List and click Delete. Click Save to save the settings displayed in Tone Curve Settings List or Threshold Settings List.
Page 406: Preferences Dialog Box
Preferences Dialog Box In the Preferences dialog box, you can make advanced settings to ScanGear functions via the Scanner, Preview, Scan, and Color Settings tabs. Click Preferences... in the ScanGear (scanner driver) screen to open the Preferences dialog box. Scanner Tab Allows you to set the quiet mode, specify the folder in which to save images temporarily, and set the music file to play during or at the end of a scan.
Page 407: Scanner Tab
Scanner Tab On the Scanner tab, you can specify the following settings. Important • Available functions and settings vary depending on your scanner or printer. Auto Power Settings You can set to turn the machine on or off automatically. Click Settings... to display the Auto Power Settings dialog box. Note •...
Page 408 Quiet Settings The silent function allows you to reduce the operating noise of this machine. Use this when you wish to reduce the operating noise such as when scanning or printing at night. Click Settings... to set the quiet mode. Note •...
Page 409 Calibration Settings When you set Execute at Every Scan to ON, the scanner will be calibrated every time before previewing and scanning, to reproduce correct color tones in scanned images. Note • Even when Execute at Every Scan is set to OFF, the scanner may be calibrated automatically in some cases (such as immediately after you turn the machine on).
Page 410: Preview Tab
Preview Tab On the Preview tab, you can specify the following settings. Preview at Start of ScanGear Select what to do with Preview when ScanGear (scanner driver) is started. Automatically Execute Preview ScanGear will automatically start previewing at startup. Display Saved Preview Image The previously previewed image will be displayed.
Page 411 Larger Displays 105 % (in width and height) of the area displayed for the standard size. Standard The standard size. Smaller Displays 95 % (in width and height) of the area displayed for the standard size. Note • When you change the Cropping Size for Thumbnail View setting, the preview images will be refreshed and cropped to the new size.
Page 412: Scan Tab
Scan Tab On the Scan tab, you can specify the following settings. Status of ScanGear dialog after scanning Select what to do with ScanGear (scanner driver) after scanning images. Close ScanGear automatically Select this to return to the original application when scanning is completed. Do not close ScanGear automatically Select this to return to the ScanGear screen for another scan when scanning is completed.
Page 413: Color Settings Tab
Color Settings Tab On the Color Settings tab, you can specify the following settings. Color Adjustment Select one of the following. Recommended Select this to vividly reproduce the tone of a document on the screen. It is recommended that you normally select this setting.
Page 414 • Color Matching is available when ScanGear, monitor, color management-compliant application (such as Adobe Photoshop), and printer are set up correctly. Refer to the corresponding manual for the monitor, printer, and application settings. Monitor Gamma By setting the gamma value of a monitor, you can adjust the input data to the brightness characteristics of the monitor.
Page 415: Placing Items (When Scanning From A Computer)
Placing Items (When Scanning from a Computer) Learn how to place items on the platen or ADF (Auto Document Feeder) of your scanner or printer. Place items correctly according to the type of item to be scanned. Otherwise, items may not be scanned correctly. Important •...
Page 416 the platen may be saved as PDF files. To save in a format other than PDF, scan by specifying the data format. Placing Multiple Items: Allow 0.4 inch (1 cm) or more space between the edges (diagonally striped area) of the platen and items, and between items.
Page 418: Adjusting Cropping Frames (Scangear)
Adjusting Cropping Frames (ScanGear) "Cropping" is the act of selecting the area you want to keep in an image and discarding the rest when scanning it. On the Basic Mode tab and Advanced Mode tab, you can specify cropping frames (scan areas) on the image(s) displayed in the Preview area of the screen.
Page 419 In whole image view: Represents an unselected cropping frame. The settings on the Basic Mode tab or Advanced Mode tab will not be applied. Adjusting a Cropping Frame The cursor will change into (Arrow) when it is positioned over a cropping frame. If you click and drag the mouse in the direction of the arrow, the cropping frame will expand or contract accordingly.
Page 420 In whole image view: Click and drag the mouse in a space outside the existing cropping frame to create a new cropping frame in the Preview area. The new cropping frame will be the active cropping frame, and the old cropping frame will be the unselected cropping frame.
Page 421 In whole image view: To delete a cropping frame, select it and click (Remove Cropping Frame) on the Toolbar. Alternatively, press the Delete key. When there are multiple cropping frames, all the selected cropping frames (active cropping frame and selected cropping frames) are deleted simultaneously.
Page 422: General Notes (Scanner Driver)
General Notes (Scanner Driver) ScanGear (scanner driver) is subject to the following restrictions. Keep these points in mind when using it. Scanner Driver Restrictions • When using the NTFS file system, the TWAIN data source may not be invoked. This is because the TWAIN module cannot be written to the winnt folder for security reasons.
Page 423 • When scanning images into Microsoft Office 2007/Microsoft Office 2010 (Word, Excel, PowerPoint, etc.), use Microsoft Clip Organizer. • Images may not be scanned correctly in some applications. In that case, increase the operating system's virtual memory and retry. • When image size is too large (such as when scanning large images at high resolution), your computer may not respond or the progress bar may remain at 0 % depending on the application.
Page 424: Useful Information On Scanning
Useful Information on Scanning Adjusting Cropping Frames in the Image Stitch Window Resolution Data Formats Color Matching...
Page 425: Adjusting Cropping Frames In The Image Stitch Window
Adjusting Cropping Frames in the Image Stitch Window "Cropping" is the act of selecting the area you want to keep in an image and discarding the rest when scanning it. In the Image Stitch window, you can specify a cropping frame on the image displayed in the Preview area.
Page 426: Resolution
Resolution The data in the image you have scanned is a collection of dots carrying information about brightness and color. The density of these dots is called "resolution", and resolution will determine the amount of detail your image contains. The unit of resolution is dots per inch (dpi).
Page 427 Attaching to e-mail Color, Grayscale, or 150 dpi Black and White Scanning text using OCR Color or Grayscale 300 dpi Important If you double the resolution, the data size of the scanned image quadruples. If the file is too large, the processing speed will slow down significantly, and you will experience inconvenience such as lack of memory.
Page 428: Data Formats
Data Formats You can select a data format when saving scanned images. You should specify the most suitable data format according to how you want to use the image on which application. Available data formats vary by application and operating system (Windows or Mac OS). See below for the characteristics of each image data format.
Page 429: Color Matching
Color Matching "Color Matching" is the act of making adjustments so that the color tones match between the original item, the monitor display, and the color printout. On your scanner or printer, the color tones are adjusted as shown below. Example: When sRGB is selected as the output profile (target) Input Profile (Source) Scanner...
Page 430: Other Scanning Methods
Other Scanning Methods Scanning with WIA Driver Scanning Using the Control Panel (Windows XP Only)
Page 431: Scanning With Wia Driver
Scanning with WIA Driver You can scan an item from a WIA (Windows Image Acquisition)-compliant application. WIA is a driver model implemented in Windows XP or later. It allows you to scan items without using an application. The procedure varies depending on the application. The following procedures are examples only.
Page 432 • Resolution (DPI) Enter the resolution. Specify a value between 50 dpi and 600 dpi. Resolution • Brightness Move the slider to adjust the brightness. Move it to the left to darken and right to brighten the image. You can also enter a value (-100 to 100). •...
Page 433 Click Adjust the quality of the scanned picture and set the preferences as required. • Brightness Move the slider to adjust the brightness. Move it to the left to darken and right to brighten the image. You can also enter a value (-127 to 127). •...
Page 434: Scanning Using The Control Panel (Windows Xp Only)
You can scan images via the Control Panel of Windows XP using the WIA driver. From the Start menu, select Control Panel. Click Printers and Other Hardware > Scanners and Cameras, then double-click Canon XXX series (where "XXX" is the model name). The Scanner and Camera Wizard dialog box appears. Click Next.
Page 435 Move the slider to adjust the brightness. Move it to the left to darken and right to brighten the image. You can also enter a value (-127 to 127). • Contrast Move the slider to adjust the contrast. Moving it to the left will decrease the contrast of the image, thus softening the image.
Page 436: Placing Items (When Scanning From A Computer)
Placing Items (When Scanning from a Computer) Learn how to place items on the platen of your scanner or printer. Place items correctly according to the type of item to be scanned. Otherwise, items may not be scanned correctly. Important Do not place objects on the document cover.
Page 437 Important Important Large items (such as A4 size photos) that Refer to "Loading Originals" for your cannot be placed away from the edges/ model from Home of the Online arrow (alignment mark) of the platen may Manual for details on the portions in be saved as PDF files.
Page 438: Troubleshooting
Troubleshooting The Machine Cannot Be Powered On Printing Does Not Start Paper Does Not Feed Properly/"No Paper" Error Occurs Print Results Not Satisfactory Ink Is Not Ejected Paper Jams If an Error Occurs Search Each Function Problems with Printing Problems with Printing Quality Problems with Scanning Problems with the Machine Problems with Installation/Downloading...
Page 439: Problems With Printing
Problems with Printing Printing Does Not Start Paper Jams Paper Does Not Feed Properly/"No Paper" Error Occurs Copying/Printing Stops Before It Is Completed...
Page 440: Printing Does Not Start
• In Windows XP, select the Start menu > Control Panel > Printers and Other Hardware > Printers and Faxes. 3. Open the properties of the printer driver for the machine. • In Windows 8 or Windows 7, right-click the "Canon XXX Printer" icon (where "XXX" is your machine's name), then select Printer properties.
Page 441 Properties. 4. Click the Ports tab to confirm the port settings. Make sure that a port named "USBnnn" (where "n" is a number) with "Canon XXX Printer" appearing in the Printer column is selected for Print to the following port(s).
Page 442: Paper Jams
Paper Jams When paper is jammed, the Alarm lamp flashes orange and a troubleshooting message is displayed on the computer screen automatically. Take the appropriate action described in the message. For details on how to remove the jammed paper, refer to Support Code List (When Paper Is Jammed).
Page 443: Paper Does Not Feed Properly/"No Paper" Error Occurs
Paper Does Not Feed Properly/"No Paper" Error Occurs Make sure that paper is loaded. Check1 Loading Paper Make sure of the following when you load paper. Check2 • When loading two or more sheets of paper, align the edges of the sheets before loading. •...
Page 444 Clean the paper feed roller. Check7 Cleaning the Paper Feed Roller Note • Cleaning the paper feed roller will wear the roller, so perform this procedure only when necessary.
Page 445: Copying/Printing Stops Before It Is Completed
Copying/Printing Stops Before It Is Completed Is the paper loaded? Check1 Make sure that paper is loaded. If the machine has run out of paper, load paper. Do the printing documents have lots of photographs or illustrations? Check2 As printing large data such as photos or graphics takes time for the machine and the computer to process, the machine may appear to have stopped operating.
Page 446: Problems With Printing Quality
Problems with Printing Quality Print Results Not Satisfactory Ink Is Not Ejected...
Page 447: Print Results Not Satisfactory
Print Results Not Satisfactory If the print result is not satisfactory due to white streaks, misaligned lines, or uneven colors, confirm the paper and print quality settings first. Do the page size and media type settings match the size and type of the loaded Check1 paper? When these settings are incorrect, you cannot obtain a proper print result.
Page 448: Cannot Print To End Of Job
Cannot Print to End of Job Select the setting not to compress the printing data. Check1 If you select the setting not to compress the printing data with an application software you are using, the printing result may be improved. Click Print Options on the Page Setup sheet on the printer driver.
Page 449: No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks
No Printing Results/Printing Is Blurred/Colors Are Wrong/White Streaks No Printing Results Printing Is Blurred Colors Are Wrong White Streaks...
Page 450 Did you confirm the paper and print quality settings? Check1 Print Results Not Satisfactory Print the Nozzle Check Pattern and perform any necessary maintenance Check2 operations such as Print Head Cleaning. Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles. Refer to When Printing Becomes Faint or Colors Are Incorrect for the Nozzle Check Pattern printing, Print Head...
Page 451 Make sure that the original is properly loaded on the platen glass. Check7 Loading Originals Is the original loaded with the side to be copied facing down on the platen Check8 glass? Did you copy a printout done by this machine? Check9 If you use a printout done by this machine as the original, print quality may be reduced depending on the condition of the original.
Page 452: Colors Are Unclear
Colors Are Unclear Is the Nozzle Check Pattern printed properly? Check1 Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles. Refer to When Printing Becomes Faint or Colors Are Incorrect for the Nozzle Check Pattern printing, Print Head Cleaning, and Print Head Deep Cleaning.
Page 453: Lines Are Misaligned
Lines Are Misaligned Did you confirm the paper and print quality settings? Check1 Print Results Not Satisfactory Perform Print Head Alignment. Check2 If printed lines are misaligned or print results are otherwise unsatisfactory, adjust the print head position. Aligning the Print Head Note •...
Page 454: Line Does Not Print Or Prints Partially
Line Does Not Print or Prints Partially Is the Page Layout Printing performed or the Binding margin function used? Check1 When the Page Layout Printing or Binding margin function is being used, thin lines may not be printed. Try thickening the lines in the document. Is the size of the print data extremely large? Check2 Click Print Options on the Page Setup sheet on the printer driver.
Page 455: Image Does Not Print Or Prints Partially
Image Does Not Print or Prints Partially Select the setting not to compress the printing data. Check1 If you select the setting not to compress the printing data with an application software you are using, the printing result may be improved. Click Print Options on the Page Setup sheet on the printer driver.
Page 456: Printed Paper Curls Or Has Ink Blots
Is Photo Paper used for printing photographs? Check3 When printing data with high color saturation such as photographs or images in deep color, we recommend using Photo Paper Plus Glossy II or other Canon speciality paper. Media Types You Can Use...
Page 457: Paper Is Smudged/Printed Surface Is Scratched
Paper Is Smudged/Printed Surface Is Scratched Paper Is Smudged The Edges of Paper Are Smudged Printed Surface Is Smudged Printed Surface Is Scratched Did you confirm the paper and print quality settings? Check1 Print Results Not Satisfactory Is the appropriate type of paper used? Check the followings: Check2 Check to see if the paper you are printing on is suitable for your printing purpose.
Page 458 2. Check that the paper is now flat. We recommend printing curl-corrected paper one sheet at a time. Note • Depending on the media type, the paper may be smudged or may not be fed properly even if it is not curled inward.
Page 459 Note • Cleaning the paper feed roller will wear the roller, so perform this procedure only when necessary. Is the inside of the machine dirty? Check8 When performing duplex printing, the inside of the machine may become stained with ink, causing the printout to become smudged.
Page 460: Back Of The Paper Is Smudged
Back of the Paper Is Smudged Did you confirm the paper and print quality settings? Check1 Print Results Not Satisfactory Perform the Bottom Plate Cleaning to clean the inside of the machine. Check2 Cleaning the Inside of the Machine (Bottom Plate Cleaning) Note •...
Page 461: Colors Are Uneven Or Streaked
Colors Are Uneven or Streaked Colors Are Uneven Colors Are Streaked Did you confirm the paper and print quality settings? Check1 Print Results Not Satisfactory Print the Nozzle Check Pattern and perform any necessary maintenance Check2 operations such as Print Head Cleaning. Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head nozzles.
Page 462 Aligning the Print Head Note • If the problem is not resolved after performing the Print Head Alignment, perform Print Head Alignment manually referring to Aligning the Print Head Position from Your Computer.
Page 463: Ink Is Not Ejected
Ink Is Not Ejected When a FINE cartridge runs out of ink, replace it with a new one. Check1 Is the FINE cartridge installed properly? Check2 If the FINE cartridge is not installed securely, ink may not be ejected correctly. Retract the output tray extension and the paper output tray, open the cover, then remove the FINE cartridges.
Page 464: Problems With Scanning
Problems with Scanning Problems with Scanning Scan Results Not Satisfactory Software Problems...
Page 465: Problems With Scanning
Problems with Scanning Scanner Does Not Work ScanGear (Scanner Driver) Does Not Start Error Message Appears and the ScanGear (Scanner Driver) Screen Does Not Appear Cannot Scan Multiple Items at One Time Cannot Scan Properly with Auto Scan Slow Scanning Speed "There is not enough memory."...
Page 466: Scanner Does Not Work
Scanner Does Not Work Check 1: Make sure that your scanner or printer is turned on. Check 2: Connect the USB cable to a different USB port on the computer. Check 3: If the USB cable is connected to a USB hub, remove it from the USB hub and connect it to a USB port on the computer.
Page 467: Scangear (Scanner Driver) Does Not Start
ScanGear (Scanner Driver) Does Not Start Check 1: Make sure that MP Drivers is installed. If not installed, install MP Drivers from the Setup CD-ROM or the web page. Check 2: Select your scanner or printer on the application's menu. Important If your scanner or printer name is displayed multiple times, select the one that does not include WIA.
Page 468: Error Message Appears And The Scangear (Scanner Driver) Screen Does Not Appear
Error Message Appears and the ScanGear (Scanner Driver) Screen Does Not Appear Check 1: Make sure that your scanner or printer is turned on. Check 2: Turn off your scanner or printer, then reconnect the USB cable and replug the power cord. Check 3: Connect the USB cable to a different USB port on the computer.
Page 469: Cannot Scan Multiple Items At One Time
Cannot Scan Multiple Items at One Time Check 1: Make sure that the items are placed correctly. Placing Items (When Scanning from a Computer) Check 2: Check if you can properly scan one item. Some applications do not support multiple image scanning. In that case, scan each item individually.
Page 470: Cannot Scan Properly With Auto Scan
Cannot Scan Properly with Auto Scan Check 1: Make sure that the items are placed correctly. Placing Items (When Scanning from a Computer) Check 2: Multiple items scanning may not be supported. Some applications do not support multiple image scanning. In that case, scan each item individually.
Page 471: Slow Scanning Speed
Slow Scanning Speed Check 1: To view the image on a monitor, set the output resolution to around 150 dpi. To print, set it to around 300 dpi. Resolution Check 2: Set Fading Correction, Grain Correction, etc. to None. Refer to "Image Settings" for your model from Home of the Online Manual for details. Check 3: In IJ Scan Utility, deselect the Correct slanted text document / Detect the orientation of text document and rotate image checkbox and scan again.
Page 472: There Is Not Enough Memory." Message Is Displayed
"There is not enough memory." Message Is Displayed Check 1: Exit other applications and try again. Check 2: Reduce the resolution or output size and scan again. Resolution...
Page 473: Computer Stops Operating During Scanning
Computer Stops Operating during Scanning Check 1: Restart the computer, reduce the output resolution in ScanGear (scanner driver) and scan again. Refer to "Output Settings" for your model from Home of the Online Manual for details. Check 2: Delete unnecessary files to obtain sufficient free hard disk space, then scan again.
Page 474: Scanner Does Not Work After Upgrading Windows
• Step 2: Uninstall IJ Scan Utility. • Windows 8: Click the Settings charm > Control Panel > Programs > Uninstall a program. Double-click Canon IJ Scan Utility. When a confirmation appears, click Yes. When uninstallation is complete, click OK. IJ Scan Utility is deleted.
Page 475 • Windows XP: From the Start menu, select Control Panel > Add or Remove Programs. Select Canon IJ Scan Utility, then click Change/Remove. When a confirmation appears, click Yes. When uninstallation is complete, click OK. IJ Scan Utility is deleted.
Page 476: Scanned Image Does Not Open
Scanned Image Does Not Open Check: If the data format is not supported by the application, scan the image again and select a popular data format such as JPEG when saving it. Refer to the application's manual for details. If you have any questions, contact the manufacturer of the application.
Page 477: Scan Results Not Satisfactory
Scan Results Not Satisfactory Scan Quality (Image Displayed on the Monitor) Is Poor Scanned Image Is Surrounded by Extra White Areas Cannot Scan at the Correct Size Item Is Placed Correctly, but the Scanned Image Is Slanted Scanned Image Is Enlarged (Reduced) on the Computer Monitor...
Page 478: Scan Quality (Image Displayed On The Monitor) Is Poor
Scan Quality (Image Displayed on the Monitor) Is Poor Check 1: Increase the scanning resolution if the image is jagged. Resolution Check 2: Set the display size to 100 %. Some applications do not display images clearly if the display size is too small. Check 3: If moire (stripe pattern) appears, take the following measures and scan again.
Page 479 Correction, etc. in Image Settings on the Advanced Mode tab of ScanGear. Refer to "Image Settings" for your model from Home of the Online Manual for details. Check 7: If the color tone of images is different from the original document, take the following measures and scan again.
Page 480: Scanned Image Is Surrounded By Extra White Areas
Scanned Image Is Surrounded by Extra White Areas Check: Specify the scan area. Click (Auto Crop) in whole image view of ScanGear (scanner driver) to automatically display the cropping frame (scan area) according to the item size. You can also manually specify the scan area in thumbnail view or when there are white margins along the item (for example, in photos), or when you want to create custom cropping frames.
Page 481: Cannot Scan At The Correct Size
Cannot Scan at the Correct Size Check: Make sure that the items are placed correctly. Placing Items (When Scanning from a Computer)
Page 482: Item Is Placed Correctly, But The Scanned Image Is Slanted
Item Is Placed Correctly, but the Scanned Image Is Slanted Check: When Document or Magazine is selected for the item type, deselect the Correct slanted text document checkbox and scan the item again. Settings (Document Scan) Dialog Box Settings (Custom Scan) Dialog Box...
Page 483: Scanned Image Is Enlarged (Reduced) On The Computer Monitor
Scanned Image Is Enlarged (Reduced) on the Computer Monitor Check 1: Change the display setting in the application. Refer to the application's manual for details. If you have any questions, contact the manufacturer of the application. Note You cannot reduce the image size in Paint. To reduce the display size, open the images in an application.
Page 484: Software Problems
Software Problems The E-mail Client You Want to Use Does Not Appear in the Screen for Selecting an E- mail Client...
Page 485 The E-mail Client You Want to Use Does Not Appear in the Screen for Selecting an E-mail Client Check: Check that the e-mail client's MAPI is enabled. Refer to the e-mail client's manual for how to set MAPI. If the problem is not solved even when MAPI is enabled, select None (Attach Manually) in the screen for selecting an e-mail client, then manually attach the image to the outgoing e- mail.
Page 486: Problems With The Machine
Problems with the Machine The Machine Cannot Be Powered On The Machine Turns Off Unintendedly Cannot Connect to Computer Properly FINE Cartridge Holder Does Not Move to the Position for Replacing Printer Status Monitor Is Not Displayed...
Page 487: The Machine Cannot Be Powered On
The Machine Cannot Be Powered On Press the ON button. Check1 Make sure that the power plug is securely plugged into the power cord Check2 connector of the machine, then turn it back on. Unplug the machine from the power supply, then plug the machine back in and Check3 turn the machine back on after leaving it for at least 2 minutes.
Page 488: The Machine Turns Off Unintendedly
The Machine Turns Off Unintendedly Deactivate the setting to turn the unit off automatically. Check The machine turns off automatically according to the elapsed time you specified if you activate the setting to turn the unit off automatically. If you do not want the machine to turn off automatically, open the printer driver setup window and in Auto Power under the Maintenance sheet, select Disable for Auto Power Off.
Page 489: Cannot Connect To Computer Properly
Cannot Connect to Computer Properly Printing or Scanning Speed Is Slow/Hi-Speed USB Connection Does Not Work/"This device can perform faster" Message Is Displayed If your system environment is not fully compatible with Hi-Speed USB, the machine will operate at a lower speed provided under USB 1.1.
Page 490: Fine Cartridge Holder Does Not Move To The Position For Replacing
FINE Cartridge Holder Does Not Move to the Position for Replacing Is the ON lamp off? Check1 Check if the ON lamp is lit. The FINE cartridge holder will not move unless the power is on. If the ON lamp is off, close the cover and turn the machine on.
Page 491: Printer Status Monitor Is Not Displayed
Printer Status Monitor Is Not Displayed Is the printer status monitor enabled? Check1 Make sure that Enable Status Monitor is selected on the Option menu of the printer status monitor. 1. Open the printer driver setup window. How to Open the Printer Driver Setup Window 2.
Page 492: Problems With Installation/Downloading
Problems with Installation/Downloading Cannot Install the MP Drivers Easy-WebPrint EX Does Not Start Up or Easy-WebPrint EX Menu Does Not Appear...
Page 493: Cannot Install The Mp Drivers
Cannot Install the MP Drivers • If the installation does not start even after the Setup CD-ROM is inserted into your computer's disc drive: Start the installation following the procedure below. 1. Select items as shown below. ◦ In Windows 8, select the Explorer icon in Taskbar on Desktop, then select Computer from the list on the left.
Page 494 Note • The printer is not detected. Check the connection. may be displayed depending on the computer you use. Make sure that the USB cable is securely plugged in to the machine and the Check1 computer. Follow the procedure below to connect the machine and the computer Check2 again.
Page 495: Easy-Webprint Ex Does Not Start Up Or Easy-Webprint Ex Menu Does Not Appear
Is Canon Easy-WebPrint EX displayed on the Toolbars menu in the Internet Check1 Explorer's View menu? If Canon Easy-WebPrint EX is not displayed, Easy-WebPrint EX is not installed on your computer. Install the latest Easy-WebPrint EX onto your computer from our website. Note •...
Page 496: About Errors/Messages Displayed
About Errors/Messages Displayed If an Error Occurs A Message Is Displayed...
Page 497: If An Error Occurs
If an Error Occurs When an error occurs in printing such as the machine is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message. When an error occurs, the Alarm lamp flashes orange and a Support Code (error number) is displayed on the computer screen.
Page 498 Support Code Corresponding to the Number of Alternate Flashes of the ON Lamp and the Alarm Lamp Example of 2 times flashing: (A) Flashes (B) Goes off Number of flashes Cause Support Code 2 flashes Printer error has occurred. 5100 7 flashes Printer error has occurred.
Page 499 Click Here to Search For details on how to resolve errors without Support Codes, see A Message Is Displayed.
Page 500: A Message Is Displayed
Properties. 4. Click the Ports tab to confirm the port settings. Make sure that a port named "USBnnn" (where "n" is a number) with "Canon XXX Printer" appearing in the Printer column is selected for Print to the following port(s).
Page 501 Set the correct printer port on Diagnose and Repair Printer. Follow the on-screen instructions to set the correct printer port, then select your machine's name. In Windows 7, Windows Vista, or Windows XP, click Start and select All programs, Canon Utilities, Canon My Printer, Canon My Printer, then select Diagnose and Repair Printer. Follow the on-screen instructions to set the correct printer port, then select your machine's name.
Page 502 Other Error Messages If an error message is displayed outside the printer status monitor, check the Check following: • "Could not spool successfully due to insufficient disk space" Delete any unnecessary files to increase the amount of free space on the disk. •...
Page 503 This dialog box appears when administrative rights are required to perform a task. If you are logged on to an administrator account, follow the on-screen instructions. 2. Select Canon Inkjet Printer/Scanner/Fax Extended Survey Program. 3. Select Change. If you select Yes after you have followed the on-screen instructions, the confirmation screen will be displayed at the time of the next survey.
Page 504: If You Cannot Resolve The Problem
If you cannot resolve the problem with any of the workarounds in this chapter, please contact the seller of the machine or the service center. Canon support staff are trained to be able to provide technical support to satisfy customers. Caution •...
Page 505: Support Code List
Support Code List The support code appears on the computer screen when an error occurs. "Support Code" means the error number and appears with an error message. When an error occurs, check the support code displayed on the computer screen and take the appropriate action.
Page 506: Support Code List (When Paper Is Jammed)
Support Code List (When Paper Is Jammed) If the paper is jammed, remove it following the procedure appropriate for each case. • If you can see the jammed paper at the paper output slot or the rear tray: 1300 • If the paper tears and you cannot remove it from the paper output slot or from the rear tray: Paper Is Jammed inside the Machine •...
Page 507 1300 Cause Paper is jammed in the paper output slot or in the rear tray. Action Remove the jammed paper following the procedure below. Note • If you need to turn off the machine to remove jammed paper during printing, press the Stop button to cancel print jobs before turning off the machine.
Page 508: Paper Is Jammed Inside The Machine
Paper Is Jammed inside the Machine If the jammed paper tears and you cannot remove the paper either from the paper output slot or from the rear tray, or if the jammed paper remains inside the machine, remove the paper following the procedure below.
Page 509 4. Hold the jammed paper with your hands. If the paper is rolled up, pull it out. 5. Pull the paper slowly not to tear it, then pull the paper out. 6. Make sure that all the jammed paper is removed. If the paper is torn, a piece of paper may remain inside the machine.
Page 510 7. Close the cover. All print jobs in the queue are canceled. Reprint if necessary. Note • When reloading the paper, confirm that you are using the paper suited for printing and are loading it correctly. If the message about paper jam is displayed on the computer screen when you resume printing after removing all the jammed paper, a piece of paper may remain inside the machine.
Page 511: In Other Cases
In Other Cases Make sure of the following: Are there any foreign objects around the paper output slot? Check1 Are there any foreign objects in the rear tray? Check2 If there are any foreign objects in the rear tray, be sure to turn off the machine, unplug it from the power supply, then remove the foreign object.
Page 512 1000 Cause There is no paper in the rear tray. Action Reload the paper on the rear tray and press the machine's Black or Color button.
Page 513 1200 Cause The cover is open. Action Close the cover and wait for a while. Do not close it while you are replacing a FINE cartridge.
Page 514 1203 Cause The cover is opened while printing is in progress. Action If paper is left inside the machine, remove the paper slowly with both hands and close the cover. Press the machine's Black or Color button to dismiss the error. The machine ejects the blank paper and resumes printing from the next paper.
Page 515 1401 Cause The FINE cartridge is not installed. Action Install the FINE cartridge. If the error is not resolved, the FINE cartridge may be damaged. Contact the service center.
Page 516 1403 Cause The FINE cartridge cannot be recognized. Action Replace the FINE cartridge. If the error is not resolved, the FINE cartridge may be damaged. Contact the service center.
Page 517 1485 Cause Appropriate ink cartridge is not installed. Action Printing cannot be executed because the ink cartridge is not compatible with this machine. Install the appropriate ink cartridge. If you want to cancel printing, press the machine's Stop button.
Page 518 1682 Cause The FINE cartridge cannot be recognized. Action Replace the FINE cartridge. If the error is not resolved, the FINE cartridge may be damaged. Contact the service center.
Page 519 1684 Cause The ink cartridge cannot be recognized. Action Printing cannot be executed because the ink cartridge may not be installed properly or may not be compatible with this machine. Install the appropriate ink cartridge. If you want to cancel printing, press the machine's Stop button.
Page 520 If you want to continue printing without this function, press the machine's Stop button for at least 5 seconds. Canon recommends to use new genuine Canon cartridges in order to obtain optimum qualities. Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition.
Page 521 1687 Cause The FINE cartridge is not installed properly. Action Retract the output tray extension and the paper output tray, open the cover, then remove the FINE cartridges. Then install the FINE cartridges again. Push the FINE cartridge until it clicks into place. After installing, close the cover.
Page 522 1688 Cause The ink has run out. Action Replace the ink cartridge and close the cover. If printing is in progress and you want to continue printing, press the machine's Stop button for at least 5 seconds with the ink cartridge installed. Then printing can continue under the ink out condition. The function for detecting the remaining ink level will be disabled.
Page 523 1700 Cause The ink absorber is almost full. Action Press the machine's Black or Color button to continue printing. Contact the service center.
Page 524 1701 Cause The ink absorber is almost full. Action Press the machine's Black or Color button to continue printing. Contact the service center.
Page 525 1890 Cause The protective material for the FINE Cartridge holder or the tape may remain attached to the holder. Action Make sure that the protective material or the tape does not remain attached to the FINE cartridge holder. If you find the protective material or the tape remains attached, retract the output tray extension and the paper output tray to remove the protective material or the tape.
Page 526 2900 Cause Scanning the print head alignment sheet has failed. Action Press the machine's Black or Color button to dismiss the error. Check the following points, perform Automatic Print Head Alignment again. • Make sure that the print head alignment sheet is set in the correct position and orientation on the platen glass.
Page 527 2901 Cause Printing of the print head alignment pattern is complete and the machine is in waiting for scanning the sheet. Action Proceed to scan the printed alignment pattern. 1. Load the print head alignment sheet on the platen glass. Load the print head alignment sheet with the printed side facing down and align the mark on the upper left corner of the sheet with the alignment mark...
Page 528 4100 Cause The specified data cannot be printed. Action When you print the contents on CREATIVE PARK PREMIUM, confirm the message on the computer screen, make sure that genuine Canon FINE cartridges are all installed properly, then start printing again.
Page 529 4102 Cause The media type and paper size are not set correctly. Action Press the machine's Stop button, to cancel printing, change the media type or paper size setting, then print again. • When the media type is set to Photo Paper Plus Glossy II: Set the paper size to 4"x6"...
Page 530 5011 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 531 5012 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 532 5100 Cause Printer error has occurred. Action Cancel printing, turn off the machine. Then clear the jammed paper or protective material that is preventing the FINE cartridge holder from moving, and turn on the machine again. If the problem is not resolved, contact the service center. Important •...
Page 533 5200 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 534 5400 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 535: 5B00
5B00 Cause Printer error has occurred. Action Contact the service center.
Page 536 5B01 Cause Printer error has occurred. Action Contact the service center.
Page 537 6000 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 538 6500 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 539 6800 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 540 6801 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 541 6930 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 542 6931 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 543 6932 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 544 6933 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 545 6936 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 546 6937 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 547 6938 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 548 6940 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 549 6941 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 550 6942 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 551 6943 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 552 6944 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 553 6945 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 554 6946 Cause Printer error has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.
Page 555 B200 Cause An error requiring you to contact the service center has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Contact the service center.
Page 556 B201 Cause An error requiring you to contact the service center has occurred. Action Turn off the machine, and unplug the power cord of the machine from the power supply. Contact the service center.

This manual is also suitable for:

Pixma e404 Pixma e401 Pixma e464 Pixma e414 Pixma e484

Canon PIXMA E400 Series Online Manual

Quick Links

Related Manuals for Canon PIXMA E400 Series

Summary of Contents for Canon PIXMA E400 Series