Travel - Spektrum DX3R Manual

Travel

Travel
User Name
01: Model 01
ST
TH
AX
The Travel screen (sometimes referred to as travel
adjust or end points) allows independent travel
adjustment of the servo throw in each direction of
all three channels (steering, throttle and auxiliary).
A graphic illustration displays the effect of travel
adjust.
To aCCess The Travel funCTIon:
From the list screen rotate the roller to highlight the
Travel function.
Press the roller to enter the Travel function. The
Travel screen will be displayed as shown above.
Rotate the roller to highlight the desired channel that
you wish to adjust the travel.
ST= Steering
TH= Throttle and brake
AX= Auxiliary channel 3
Press the roller to enter the highlighted channel's
travel function (see monitor Page 28.)
SPEKTRUM DX3R PROGRAMMING GUIDE
≤
L 100%
R 100%
H 100%
L 100%
H 100%
L 100%
Travel
01: Model 01
Steering
100% 100%
Rotate the roller to highlight the values at the
bottom of the screen; then press the roller to
select the values.
Rotating the roller will now adjust both the right and
left values simultaneously. If you desire to adjust
the right or left directions independently, then move
the corresponding channel's wheel, throttle stick or
trigger. The trimmer that the Aux channel is assigned
to and that value alone will be highlighted (i.e.
turning the steering wheel to the right will highlight
the right value only and subsequent adjustment will
effect the right travel only).
Note: The DX3R features "sticky gooey."
When the corresponding channel is moved
in the desired position as illustrated above
and released, the value on that side remains
highlighted. Moving the channel in the
opposite direction will then highlight the
opposite direction's value. This allows
convenient independent travel adjustments
without having to hold the wheel or trigger in
the desired position. To highlight both values
again after moving the wheel in one direction,
simply press the roller once with the wheel
centered and both values will be highlighted.
≤
17