Setting Abbreviated Dialing; Headset Mode; Sleep Mode - Sanyo SCP-3100 Operating Manual

Note: This feature does not apply when the flip is open.

Setting Abbreviated Dialing

Abbreviated Dialing is another form of speed dialing. If the last four digits you enter do not
match any stored Contacts entry, the digits are automatically prepended with the digits
specified using the following steps.
To activate this feature:
1. Press MENU/OK to access the main menu.
2. Select Settings and press MENU/OK.
3. Select Others and press MENU/OK.
4. Select Abbrev. Dial and press MENU/OK.
Select Ph.Book Match and press MENU/OK.
5.
To set your prepend numbers.
1. Follow steps 1-4 above.
2. Select Prepend and press MENU/OK.
3. Select Enable and press MENU/OK.
4. Scroll to Prepend# and press MENU/OK.
5. Enter a five-or-six-digit number and press MENU/OK or OK (left softkey).
If you want to deactivate this feature, select Disable during step 6 above.
Tip: If you enter less than 5 digits, the display shows a warning message.

Headset Mode

To set Headset mode:
1. Press MENU/OK to access the main menu.
2. Select Settings and press MENU/OK.
3. Select Others and press MENU/OK.
4. Select Headset Mode and press MENU/OK.
5. Select Voice Call or Ready Link and press MENU/OK.
Press Info (right softkey) during step 5 above to see the Headset Mode information.
To deactivate this feature, select Off during step 5 above.

Sleep Mode

This feature helps conserve your battery power by restricting the display.
To set sleep mode:
1. Press MENU/OK to access the main menu.
2. Select Settings and press MENU/OK.
3. Select Display and press MENU/OK.
4. Select Sleep Mode and press MENU/OK.
5. Select your desired option and press MENU/OK.
To deactivate this feature, select Off during step 5 above.
29