Brake System Warning Light - Chevrolet 2008 Corvette Owner's Manual

Chevrolet 2008 corvette automobile owner's manual
Hide thumbs Also See for 2008 Corvette:
Table of Contents

Advertisement

Brake System Warning Light

Your vehicle's hydraulic brake system is divided into
two parts. If one part is not working, the other part can
still work and stop you. For good braking, though,
you need both parts working well.
United States
This light should come on when you start the engine.
If it does not come on then, have it fixed so it will
be ready to warn you if there is a problem.
If this warning light stays on after you start the engine,
the parking brake may still be set or there could be
a brake problem. Refer to Parking Brake on page 2-34
to see if it is set. If the parking brake is not set, have
your brake system inspected right away.
If the light comes on while you are driving and you have a
CHECK BRAKE FLUID message showing on the DIC,
pull off the road and stop carefully. You may notice that
the pedal is harder to push or the pedal may go closer to
the floor. It may take longer to stop. If the light is still on,
have the vehicle towed for service. See Towing Your
Vehicle on page 4-29 and DIC Warnings and Messages
on page 3-55 for more information.
Canada
CAUTION:
{
Your brake system may not be working properly
if the brake system warning light is on. Driving
with the brake system warning light on can lead
to an accident. If the light is still on after you
have pulled off the road and stopped carefully,
have the vehicle towed for service.
3-39

Advertisement

Table of Contents
loading

Table of Contents