Table of Contents
Advertisement
Adjusting the 4 corners
You may manually adjust the irregular shapes and
sizes of the rectangular image manually.
1.
To display the Corner Adjustment page, please
follow any one of these steps:
i. Press [Enter].
ii. Open the OSD Menu and enter Display >
Corner Adjustment menu and press [Enter].
This will bring up the Corner Adjustment
page.
2.
Press /// to select the corner you wish to
adjust, and then press [Enter].
3.
Press / to select a suitable adjustment
method and then press [Enter].
4.
As shown in the screen, (/ to perform 45
degree adjustments and /// to perform
90 degree adjustments). Please press ///
to adjust the shapes and size. You can press
[Menu] or [Exit] to return to the previous step.
Press and hold [Enter] for 2 seconds to reset the
settings of the selected corner.
Adjusting Keystone Correction will reset Corner
Adjustment settings.
A fter making Corner Adjustment settings, you will no longer be able to adjust certain aspect
ratios or time sequences.
In case you need to perform these changes, please reset the settings for all 4 corners.
The following message will be displayed:
To display this page, press
and hold [Enter] for 2
seconds to reset the
settings for all 4 corners.
Shows the corner that
you have selected.
27
Advertisement
Table of Contents
