Philips LCD CPT 2K7 Service Manual page 7

4.2.2 Inverter Board
Disassembly
1. Place the panel face down on the foam bars, and locate the
Inverter board.
2. Remove the cover screws.
Figure 4-7 Remove Inverter cover
Figure 4-8 Remove Inverter cover screws
3. Unplug the lamp connectors on the inverter. Start at the
top, and be careful not to pull and drag the wires. The use
of a pair of pliers can be helpful.
Mechanical Instructions
H_16910_004.eps
270607
4. You can now remove the Inverter board.
H_16910_005.eps
Reassembly
270607
To reassemble, perform all processes in reverse order.
LCD CPT 2K7
Figure 4-9 Remove Inverter connectors
Figure 4-10 Remove Inverter board
4. EN 7
H_16910_006.eps
270607
H_16910_007.eps
270607