Turn And Lane Change Signals - Chevrolet 1999 Corvette Owner's Manual

Turn Signal/Multifunction Lever
The multifunction lever on the left
steering column includes your:
D
Turn Signal and Lane Change Control
D
-
Headlamp High/Low
D
Cruise Control
D
Headlamps Switch
D
- -
Flash to Pass
-
hand side of the
Beam Changer

Turn and Lane Change Signals

The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a turn, move the multifunction lever all the
way up or down. When the turn is finished, the lever
will return automatically.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it.
As you signal a turn or a lane change, if the arrows flash
faster than normal, a signal bulb may be burned out.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you
signal a turn, check the fuses and check for burned
bulbs. (See "Fuses and Circuit Breakers" in the Index.)
yellowblue
An arrow on the instrument
cluster will flash in the
direction of the turn or
lane change.
-
out
2-43