Table of Contents
Advertisement
To remove the wiper blade assembly:
1. Open the hood to gain access to the
windshield wipers.
2. Lift the wiper arm until it locks into a vertical position.
A. Blade Assembly
B. Arm Assembly
C. Locking Tab
3. Press down on the blade assembly pivot locking tab
4. Remove the insert from the blade assembly (A). The
D. Blade Pivot
E. Hook Slot
F. Arm Hook
(C). Pull down on the blade assembly (A) to release
it from the wiper arm hook (F).
insert has two notches at one end that are locked by
the bottom claws of the blade assembly. At the
notched end, pull the insert from the blade assembly.
yellowblue
6-39
Advertisement
Chapters
Table of Contents
