Table of Contents
Advertisement
SETTING OVEN CONTROLS
Setting the control lockout
The control can be programmed to lockout the oven and
cooktop controls.
To set the control lockout feature:
1. Press the lock icon
appear in the display for a few seconds before showing
the time of day (clock).
2. The controls are inactive when
display windows.
3. If any control key is pressed when the controls are
locked, Loc will appear in the oven control display.
4. To cancel the control lockout feature, press the lock
icon and hold for 3 seconds.
5. The controls will unlock, the dashes will disappear, and
the oven will be ready to resume normal operation. .
NOTE
If any control key is pressed with the oven lockout feature
active, Loc will appear in the display until the control key
is released. But it does not disable the clock, kitchen
timer, or the interior oven lights.
Operating oven light
The interior oven light will automatically turn on when the
oven door is opened. Press the oven light key located on
the control panel to turn the interior oven light on and off
whenever the oven door is closed. For best baking results,
do not leave oven light on while baking.
The interior oven light is located at the upper left rear wall of
the oven interior. To change the interior oven light, see
"Changing the oven light" in the Care & cleaning section.
22
and hold for 3 seconds. Loc will
-
(dashes) appear in the
Setting the minute timer
1. Press Timer on-off.
2. Press
to increase time in one-minute increments.
Press and hold
increments. The timer can be set for any amount of time
from 1 minute to 11 hours and 59 minutes.
3. Press START when the desired time appears in the
display.
4. When the set time ends, the timer will beep three times
and will continue to beep three times every minute until
Timer on-off is pressed.
NOTE
The minute timer will not start or stop the cooking
process. The minute timer can be used alone or while
using any of the other oven features. If another feature is
active when the minute timer is active, the minute timer
will show in the display. To view information about other
active features, press the key for that feature.
To change the timer while it is in use:
While the timer is active and shows in the display, press and
hold
or
to increase or decrease the time
remaining.
To cancel the minute timer before the set time has run
out:
•
Press Timer on-off once.
to increase time in 10-minute
Advertisement
Table of Contents
