Sensor Reception Indicators - La Crosse Technology 328-10618 Instruction Manual

SE N S OR RECEP T IO N IN DI CATOR S
There are Sensor Reception Indicators for your Temperature/Humidity Sensor, Wind Sensor and Rain
Sensor. If you add Extra Sensors, There will be a Sensor Reception Indicator for them as well.
• When indicator is solid, sensor is connected.
• When indicator is flashing, it is searching for the individual sensor.
• If there is no indicator, the sensor is not connected.
SE N S OR I D & SE N SOR SEA RC H
Your station and each sensor have a unique ID number that will identify them in the La Crosse View app.
This has the added bonus of locking them into your weather station until you manually delete them.
View ID numbers in station:
Press and release the SENSOR button. The ID number and type will show on the bottom of the station.
• Station
• TH Sensor
• Wind Sensor
• Rain Sensor
• Extra Sensor (if connected to station)
Search for Individual sensors:
1. Press and release the SENSOR button to view sensor type and ID.
2. Hold the PLUS (+) button to search for the sensor. The reception indicator will flash for up to 3 minutes.
3. Allow up to 3 minutes to view sensor and ID on station.
Note: Once sensor is found search will stop. The reception indication will stop flashing.
Sensor and ID will show for 3 seconds.
Wi-Fi Professional Station Page | 23