Kohler K-30215T-S Installation Instructions Manual page 6

MINOR ADJUSTMENT OF
WATER LEVEL
Move the snap along "OPEN" direction.
To lower water level: Move water cup
down to a proper height and rotate
screw anticlockwise to achieve the
desired water level. (Refer to float
adjustment instructions.)
To elevate water level: Rotate screw
clockwise and raise float to the desired
water level. Elevate water cup to a
proper position as well. (Refer to float
adjustment instructions.)
Fasten the snap along "CLOSE"
direction.
Float adjustment instructions: Make
sure the height of surface E is 2-4mm
lower than surface G.
1446150-T01-B
SCALE
5:1
Fig.#15a
15a
Screw
Fig.#15b
15b
Fig.#15c
SCALE
5:1
Fig.#15d
15d
E
Float
Water Cup
Fig.#15e
15e
-6-
Snap
OPEN
15c
CLOSE
Screw
E G 2-4mm
G