Maintenance; Hints And Tips - JVC TH-WL707H Instruction Manual

2.1 aluminium soundbar with wireless subwoofer
Table of Contents

Advertisement

Available languages
  • EN

Available languages

Maintenance

Ensure the unit is fully unplugged from the mains socket before cleaning.
To clean the units, wipe the case with a slightly moist, lint-free cloth.
Do not use any cleaning fluids containing alcohol, ammonia or abrasives.
Do not spray aerosol at or near the unit.

Hints and Tips

If a problem does occur, it may often be due to something very minor. The following table
contains various tips. If you require additional assistance please click on the link for Support
Centre:
Norway: www.elkjop.no/service
Denmark: www.elgiganten.dk/service
Problem
No power.
The remote control does
not function.
Loud hum or noise is
heard.
No sound from
the soundbar and
subwoofer.
Sweden: www.elgiganten.se/service
Finland: www.gigantti.fi/huolto
Solution
• Ensure the mains plug is connected.
• Make sure that you select the On mode.
• Use the remote control near the unit.
• Point the remote control at the remote sensor on the unit.
• Replace the battery in the remote control with a new one.
• Remove any obstacles between the remote control and
the unit.
• The plugs and sockets are dirty. Wipe them with a cloth
slightly moistened with alcohol.
Please try either one of the solutions below:
• Make sure that the unit is not muted. Press
button to resume normal listening.
• Press
on the unit or on the remote control to switch the
soundbar to standby mode. Then press the button again to
switch the soundbar on.
• Unplug both the soundbar and the subwoofer from
the mains socket, then plug them again. Switch on the
soundbar.
• Ensure the audio setting of the input source (e.g. TV, game
console, DVD player, etc.) is set to PCM mode while using
digital (e.g. OPTICAL, COAXIAL) connection.
• The subwoofer is out of range, please move the subwoofer
closer to the soundbar. Make sure the subwoofer is within
5 m of the soundbar (the closer the better).
• The soundbar may have lost connection with the
subwoofer. Re-pair the units by following the steps on
the section "Pairing the Wireless Subwoofer with the
Soundbar".
• The unit may not be able to decode all digital audio
formats from the input source. In this case, the unit will
mute. This is NOT a defect.
GB
or VOL +/–
21

Advertisement

Table of Contents
loading

Table of Contents