Vivotek CD8371-HNTV User Manual page 337

Syntax:
http://<servername>/cgi-bin/admin/connect_ap.cgi
PARAMETER VALUE
N/A N/A
8.34 Get wireless information
Note: This request requires Administrator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/getwirelessinfo.cgi
PARAMETER VALUE
N/A N/A
8.35 Get wireless signal strength
0)
Note: This request requires Administrator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/getwlsignalstrength.cgi
PARAMETER VALUE
N/A N/A
DESCRIPTION
Apply the wireless settings and connect to AP.
(capability_network_wireless > 0)
DESCRIPTION
Get wireless information. Camera will return following information.
1. Wireless channel
2. Link quality
3. Signal level
4. Noise level
5. SNR
6. TX Rate
7. RX Rate
(capability_network_wireless >
DESCRIPTION
Get wireless signal strength.
VIVOTEK
User's Manual - 337