Table of Contents
Advertisement
VIVOTEK
Applications > Shock detection
The camera comes with a shock accelerometer. The shock sensor can detect impacts
to the camera. For example, when a person deliberately tries to destroy the camera, the
camera can report the event to the administrator.
Normally, a 5kgm impact can cause the detected impact level to surge to 50% on the
scale. Configure the Alarm Level to a preferred percentage on the chart. Click the Enable
shock detector checkbox and click Save to complete the configuration.
Shock Level
You should then go to Event settings to configure the shock detection as a triggering
source. See page 107 for Event configuration.
The measurement range is ±2000 g (±19613 m/s² pk).
128 - User's Manual
Advertisement
Table of Contents
