Table of Contents
Advertisement
thermal_temperaturedete
ction
camctrl_httptunnel
<Not support anymore>
camctrl_ptztunnel
camctrl_privilege
uart_httptunnel
transmission_mode
network_wire
network_wireless
customheater
<boolean>
0/7
<boolean>
0/7
<boolean>
0/7
<boolean>
0/7
<boolean>
0/7
Tx,
0/7
Rx,
Both
<boolean>
0/7
<boolean>
0/7
"auto": control by camera automatically
"customheater": the threshold of heater can
be sepcified by user.
* only available when
"capability_thermal_support" is 1.
* We support this parameter when the version
number (httpversion) is equal or greater than
0302a.
Indicate whether to support temperature
detection.
Indicate whether to support httptunnel.
* Not support this parameter anymore when the
version number (httpversion) is equal or greater
than 0301b.
* It will be replaced by
capability_camctrl_ptztunnel.
Indicate whether to support ptztunnel.
* We support this parameter when the version
number (httpversion) is equal or greater than
0301b.
This equals "capability_camctrl_c0_ptztunnel".
* This is kept for compatibility.
Indicate whether to support "Manage Privilege"
of PTZ control in the security page.
1: support both /cgi-bin/camctrl/camctrl.cgi and
/cgi-bin/viewer/camctrl.cgi
0: support only /cgi-bin/viewer/camctrl.cgi
This is equivalent
to"capability_camctrl_c0_privilege".
* This is kept for compatibility.
Indicate whether to support HTTP tunnel for
UART transfer.
Indicate transmission mode of the machine: TX
= server, Rx = receiver box, Both = DVR.
Indicate whether to support Ethernet.
Indicate whether to support wireless.
VIVOTEK
User's Manual - 227
Advertisement
Table of Contents
