Air Filter - Coleman CT200U-EX V Owner's Manual

Hide thumbs Also See for CT200U-EX V:
Table of Contents

Advertisement

Air Filter

The air cleaner element needs to be
cleaned or replaced periodically (see
chart for cleaning/replacement
intervals). The air filter element
will need to be cleaned more often
if Mini Bike is ridden in muddy, wet,
or dusty conditions. A clean air filter
will help the Mini Bike run at peak
performance allowing better gas
mileage, more power and will protect
the engine from the damaging ef-
fects of dirt entering the engine.
Air filter removal,
inspection and cleaning
instructions
1, Locate the air filter assembly (1)
2. Remove the Air filter assembly
cover by removing the air filter cover
knob (2).
3. Remove the air filter element
from the assembly by removing the
wing nut (3)
3. Remove the foam element (4)
from the paper air filter element (5)
and clean foam element with mild
soap and water. Rinse and squeeze
out excess water and allow to dry .
Note: If foam element (4) is damaged,
replace.
4. Inspect the air filter paper
element (5) for dirt and damage. If
dirty, gently tap element on ground
to remove any excess debris. Gently
blow out element from the inside
with compressed air.
too clogged or damaged for contin-
ued use, replace the element.
MAINTENANCE
Clean air filter frequently if Mini
Bike is driven in wet, muddy or
dusty conditions.
Driving in the above conditions
without cleaning frequently can
plug up the air filter which can
cause poor gas mileage, low
power and cause damage to the
engine.
If element is
18
CAUTION
3
5
2
1
4
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents