DESCRIPTION AND PART FUNCTIONS
1
2
4
5
Choke operation
Choke Lever (1): If the engine is cold,
the choke can help start the engine by
placing the choke lever to the "ON" (left)
position. Once engine has warmed up
, place choke lever to the "OFF" (right)
position.
Fuel Valve operation
Fuel Valve (2): To start the engine
and run the mini bike, the fuel valve
3
needs to be placed in the "ON" (right)
position. This allows fuel to flow to
the carburetor.
When finished riding, and while
transporting, place fuel valve in the
"OFF" (left) position.
Fuel Cap
Fuel Tank Cap
To open the fuel tank cap (3), Turn
the cap counter clockwise to remove.
To re-install the cap, turn the cap
clockwise until snug.
Starter Recoil Cord
Starter Recoil Cord (4)
To start the engine, place the on/off
switch locate on the handlebars to
the "ON" position and pull the Starter
Recoil Cord
Oil Fill plug
Oil Fill Plug (5)
To check or add oil, open the oil fill
plug/dipstick by turning counter
clockwise. To tighten, turn clockwise.
9