Table of Contents
Description ..................................................................... 2
Safety ............................................................................. 2
Identification ................................................................... 6
Specifications ................................................................. 6
Operation ....................................................................... 7
Maintenance ................................................................... 8
Troubleshooting ............................................................. 9
Disassembly ................................................................. 10
Assembly ...................................................................... 11
Illustrations ............................................................. 12-14
Parts List ................................................................ 15-17
Greenlee / A Textron Company
CK1240K and CK1240KC Crimping Tools
Description
The CK1240K Hydraulic Crimping Tool is a hand-held,
self-contained tool intended to crimp aluminum and
copper connectors onto electrical cable.
The CK1240KC has a PVC-covered crimping head.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This manual and any
markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of this
tool. Observe all of the safety information provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tools:
CK1240K11
CK1240KC11
CK1240K22
CK1240KC22
Keep this manual available to all personnel.
Replacement manuals are available upon request at
no charge at www.greenlee.com
All specifications are nominal and may change as design improve-
ments occur. Greenlee Textron Inc. shall not be liable for damages
resulting from misapplication or misuse of its products.
GATOR is a registered trademark of Greenlee Textron Inc.
Tellus is a registered trademark of Shell Oil Company.
2
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
120 V Crimping Tool
120 Volt Crimping Tool
with PVC-covered Head
230 Volt Crimping Tool
230 Volt Crimping Tool
with PVC-covered Head